Electronic Trim Indicators - Electronic Trim Actuators

Mayfair electronics by Hardin Marine and Marine Design Corp have teamed up to bring the new generation of the Heads-Up indicator system to the marine industry. This new conversion system will replace your push-pull cables that have lots of slop due to the cable functionality . This new conversion system will utilize the Mayfair 0-5 volt stainless steel potted sender or the Mercury 3-wire trim sender. The custom design and proprietary software controller that drives the highly engineered, electric drive motor assemblies will mount in the same location as your push/pull cables. With this new conversion you will have a true accurate reading on your indicator sticks. The software will auto retract the heads up indicator sticks to a down position when you turn off your ignition. When the ignition is turned back on the indicator stick will automatically return to the position the drives or tabs were left at. Pair this system with the Drive Sync option of Marine Design you will always have your drives sync together for ultimate efficiency.

Non-Standard port side trim sender and mount

Trim Sender Actuator for Mercury Verado applications.

Trim Sender Conversion Kit for #6 Drive, With Hinge Pin

Smartcraft / NMEA 2000 Upgrade Box for Mayfair Trim Indicators

Required when using Smartcraft and NMEA 2000 systems to properly convert electronic signals.

Mercury Trim Tab Actuator LED Retrofit Kit

This kit is designed to convert your Mercury K-planes from Cable indicators to the New Mayfair LED indicators , " NO MORE CABLES"

• Mercury K-planes with 1/2" Ram pins
• Non Smartcraft K-planes
• Fit Mayfair / Performance Hydraulic Trim tabs
• Fits Gen 1 Trim Tabs

Kit Includes:
• All mounting Hardware included
• new upper and lower ram pins
• stainless thru hull installation kit
• Mayfair electron actuators

Mercury Trim Tab Actuator LED Retrofit Kit

This kit is designed to convert your Mercury K-planes from Cable indicators to the New Mayfair LED indicators , " NO MORE CABLES"

• Mercury K-planes with 5/8" Ram pins
• Non Smartcraft K-planes
• Fit Mayfair / Performance Hydraulic Trim tabs
• Fits Gen 2 Trim Tabs

Kit Includes:
• All mounting Hardware included
• new upper and lower ram pins
• stainless thru hull installation kit
• Mayfair electron actuators

Trigger Sender Gen I

Mercury Drive Actuator LED Retrofit Kit

This kit is designed to add support on your Bravo, Alpha or TRS drive to support the New Mayfair LED indicators , " NO MORE CABLES"

This Kit is For:
• Mercury Bravo, Alpha and TRS Drives
• Fits Mayfair Trim Indicator Systems

Kit Includes:
• All mounting Hardware included
• wiring hardness included
• stainless thu hull installation kit
• Mayfair electronic actuators

Single LED Drive Indicator Installation Kit

This kit is designed to add support on your Bravo drive to support the New Mayfair LED indicators , " NO MORE CABLES"

Includes:

This Kit is For:
• Mercury Bravo Drives
• Fits Mayfair Trim Indicator Systems

Kit Includes:
• All mounting Hardware included
• wiring hardness included
• stainless thu hull installation kit
• Mayfair electronic actuators

Mercruiser Actuator Kit 846063A1 

Used in newer model 525-846063A1 applications, these clamps hold the actuator in place to the trim ram. If you have the old band clamp and saddle style setup, you can retrofit to these custom fit clamps. Sold in pairs.

33C to Electronic Sender Conversion Kit for LED Indicators

This is a universal mount Trim Sender for use with Mayfair LED Indicators. The bracket mounts to a 33c cable clamp provision with two screws. The #10-32 threaded end can attach to a heim end or ball joint to convert over what was previously a cable operated setup to work with a Mayfair Trim Indicator.

30 Ft Wire Harness, Drives/Tabs

This harness will cover a pair of drives OR a pair of tabs. This harness will cover 2 senders only

SENDER ASSY-TRIM Mercruiser 8M0095310 supercedes 863187A1, 863187

NOTE: If the sender you are replacing has, Green, Purple and Black wires, on this replacement model Green = Red, Purple = White and Black = Blue.

HARNESS Assembly Mercruiser 84-895820T02

This harness connects the tab senders (any kind) to a plug that is on all Mercury engines equipped with SmartCraft as of 2007.