Trailering - Non-Marking and Polyurethane Rollers

"Durable orange polyurethane. Will not mark or discolor boat. Cut and abrasion resistant. Will not "flat spot" even after months of storage. Roller is unaffected by grease, oil, gasoline, exhaust fumes, salt, etc. No bushings to pop out. Continuous bearings and reinforcing tubes on rollers over 7" long are completely enclosed in polyurethane. Shafts should be greased at installation."

Size: 10", Hole: 5/8", Reinforcing Tube: Yes, Case: 16

Sold: Each

"Durable orange polyurethane. Will not mark or discolor boat. Cut and abrasion resistant. Will not "flat spot" even after months of storage. Roller is unaffected by grease, oil, gasoline, exhaust fumes, salt, etc. No bushings to pop out. Continuous bearings and reinforcing tubes on rollers over 7" long are completely enclosed in polyurethane. Shafts should be greased at installation."

Size: 12", Hole: 5/8", Reinforcing Tube: Yes, Case: 16

Sold: Each

"Durable orange polyurethane. Will not mark or discolor boat. Cut and abrasion resistant. Will not "flat spot" even after months of storage. Roller is unaffected by grease, oil, gasoline, exhaust fumes, salt, etc. No bushings to pop out. Continuous bearings and reinforcing tubes on rollers over 7" long are completely enclosed in polyurethane. Shafts should be greased at installation."

Size: 18", Hole: 5/8", Reinforcing Tube: Yes, Case: 15

Sold: Each

"Model RP325: End cap 3" for RP33 & RP335
Model RP32: End cap 3-1/4" for RP-8, 10, 12 & 18"

Description: End cap for RP8, RP10, RP12, RP18, Size: 3-1/4", Hole: 5/8", Case: 36

Sold: Each

"Model RP325: End cap 3" for RP33 & RP335
Model RP32: End cap 3-1/4" for RP-8, 10, 12 & 18"

Description: End cap for RP33 & RP335, Size: 3", Hole: 1/2", Case: 80

Sold: Each

Fits: 3" bracket, Hole: 1/2", Case: 42

Fits: 3" bracket, Hole: 1/2", Case: 25

"Durable orange polyurethane. Will not mark or discolor boat. Cut and abrasion resistant. Will not "flat spot" even after months of storage. Roller is unaffected by grease, oil, gasoline, exhaust fumes, salt, etc. No bushings to pop out. Continuous bearings and reinforcing tubes on rollers over 7" long are completely enclosed in polyurethane. Shafts should be greased at installation."

Size: 4", Hole: 5/8", Reinforcing Tube: No, Case: 36

Sold: Each

Fits: 4" bracket, Hole: 1/2", Case: 25

"Durable orange polyurethane. Will not mark or discolor boat. Cut and abrasion resistant. Will not "flat spot" even after months of storage. Roller is unaffected by grease, oil, gasoline, exhaust fumes, salt, etc. No bushings to pop out. Continuous bearings and reinforcing tubes on rollers over 7" long are completely enclosed in polyurethane. Shafts should be greased at installation."

Size: 5", Hole: 5/8", Reinforcing Tube: No, Case: 24

Sold: Each

"Durable orange polyurethane. Will not mark or discolor boat. Cut and abrasion resistant. Will not "flat spot" even after months of storage. Roller is unaffected by grease, oil, gasoline, exhaust fumes, salt, etc. No bushings to pop out. Continuous bearings and reinforcing tubes on rollers over 7" long are completely enclosed in polyurethane. Shafts should be greased at installation."

Size: 7", Hole: 5/8", Reinforcing Tube: Yes, Case: 20

Sold: Each

"Durable orange polyurethane. Will not mark or discolor boat. Cut and abrasion resistant. Will not "flat spot" even after months of storage. Roller is unaffected by grease, oil, gasoline, exhaust fumes, salt, etc. No bushings to pop out. Continuous bearings and reinforcing tubes on rollers over 7" long are completely enclosed in polyurethane. Shafts should be greased at installation."

Size: 8", Hole: 5/8", Reinforcing Tube: Yes, Case: 20

Sold: Each

V Roller. Made of durable orange polyurethane. Comes without end bells or hardware. Also acts as center roller for ULT3 and ULT4.

Fits: 3" bracket", Hole: 1/2", Case: 40

Sold: Each

V Roller. Made of durable orange polyurethane. Comes without end bells or hardware. Also acts as center roller for ULT3 and ULT4.

Fits: 4" bracket", Hole: 1/2", Case: 20

Sold: Each

Straight Roller

Size: 12" x 2-1/2", Hole: 5/8", Case: 12

Sold: Each

"Assemblies include amber or black poly vinyl keel roller, shaft & pal nuts. Brackets are one piece, heavy-duty hot dip galvanized 11 gauge steel, specifically designed to support keel rollers. Bracket 5-3/8". Roller size 5"."

Roller Size: 5", Width Between Slots: 3", Bracket: 5-3/8", Type: Poly, Color: Amber

"Assemblies include amber or black poly vinyl keel roller, shaft & pal nuts. Brackets are one piece, heavy-duty hot dip galvanized 11 gauge steel, specifically designed to support keel rollers. Bracket is 8-3/8". Roller size is 8"."

Roller Size: 8", Width Between Slots: 6", Bracket: 8-3/8", Type: Poly, Color: Amber

"Assemblies include amber or black poly vinyl keel roller, shaft & pal nuts. Brackets are one piece, heavy-duty hot dip galvanized 11 gauge steel, specifically designed to support keel rollers. Bracket 10-3/8". Roller size is 10"."

Roller Size: 10", Width Between Slots: 8", Bracket: 10-3/8", Type: Poly, Color: Amber

"Assemblies include amber or black poly vinyl keel roller, shaft & pal nuts. Brackets are one piece, heavy-duty hot dip galvanized 11 gauge steel, specifically designed to support keel rollers. Bracket 12-3/8". Roller size is 12"."

Roller Size: 12", Width Between Slots: 10", Bracket: 12-3/8", Type: Poly, Color: Amber

"Assemblies include amber or black poly vinyl keel roller, shaft & pal nuts. Brackets are one piece, heavy-duty hot dip galvanized 11 gauge steel, specifically designed to support keel rollers. Bracket 5-3/8" with 5" roller size."

Roller Size: 5", Width Between Slots: 3", Bracket: 5-3/8", Type: Poly, Color: Black