Plumbing - Electric Bilge Pumps

Sleek, reliable and compact unit with integrated Ultima switch ready to install and run for years of service.
Patented Mirus field detector cells
No exposed sensors, eliminates corrosion possibilities
Not affected by oil or foreign debris
Includes both a straight and 90° smooth elbow Dura-Port and a removable check valve
Made in USA.

• Sleek and compact unit with integrated Ultima switch ready to install and run for years of service


• No exposed sensors, eliminates corrosion possibilities.


• Includes 2 externally threaded duraports, straight and 90° which virtually eliminate port failure


• Includes removable check valve


• Replaceable and upgradable motor cartridges


• 3 year warranty

GPH: 1000, Hose: 3/4", Volts: 12, Amps: 3.2

Low profile pump design for ease of mounting and removal in tight bilge areas, especially suited for vessels with inboard or I/O engines.
Shaft seal: lip seal
Removable cartridge style, easy to clean
Water cooled motor
Complies to ABYC, NMMA and ISO8849 marine specifications
Made in U.S.A. 3 year warranty

• Shaft seal: lip seal


• Removable cartridge style, easy to clean


• Water cooled motor


• Complies to ABYC, NMMA and ISO8849 marine specifications


• 3 year warranty

GPH: 1250, Hose: 1-1/8", Volts: 12, Amps: 3

Sleek, reliable and compact unit with integrated Ultima switch ready to install and run for years of service.
Patented Mirus field detector cells
No exposed sensors, eliminates corrosion possibilities
Not affected by oil or foreign debris
Includes both a straight and 90° smooth elbow Dura-Port and a removable check valve
Made in USA.

• Sleek and compact unit with integrated Ultima switch ready to install and run for years of service


• No exposed sensors, eliminates corrosion possibilities.


• Includes 2 externally threaded duraports, straight and 90° which virtually eliminate port failure


• Includes removable check valve


• Replaceable and upgradable motor cartridges


• 3 year warranty

GPH: 1250, Hose: 1-1/8 & 1-1/4", Volts: 12, Amps: 3

These cartridge pumps are equipped with the Ultima electronic float switch with patented Mirus field effect detector cells for problem free automatic operation. Easy-to-install Dura-Port discharge ports eliminate stress cracking caused by over-tightened hose clamps. Pumps include both a straight and a 90° smooth elbow and a removable check valve. Made in USA.

• Prewired to digital, on demand ultima switch


• High volume pump more GPH than competitive pumps


• Low amp draw, approximately an amp less draw than similar options


• Comes with 1-1/8" & 1-1/4" internally threaded duraports


• Includes removable check valve


• Adaptable to Rule bases


• 3 Year warranty

GPH: 1600, Hose: 1-1/8" & 1-1/4", Volts: 12, Amps: 7

These cartridge pumps are equipped with the Ultima electronic float switch with patented Mirus field effect detector cells for problem free automatic operation. Easy-to-install Dura-Port discharge ports eliminate stress cracking caused by over-tightened hose clamps. Pumps include both a straight and a 90° smooth elbow and a removable check valve. Made in USA.

• Prewired to digital, on demand ultima switch


• High volume pump more GPH than competitive pumps


• Low amp draw, approximately an amp less draw than similar options


• Comes with 1-1/8" & 1-1/4" internally threaded duraports


• Includes removable check valve


• Adaptable to Rule bases


• 3 Year warranty

GPH: 2200, Hose: 1-1/8" & 1-1/4", Volts: 12, Amps: 7.5

"Heavy duty automatic bilge pumps features a liquid cooled 12-pole motor with double ball bearings for extended service life. Pumps include a pre-wired mechanical automatic switch and one each of the internally threaded 1-1/8" and 1-1/4" ports and removable check valve. 3-Year warranty. Made in the USA.

• High volume pump-outputs more GPH than competitive pumps


• Low amp draw-approximately an amp less draw than similar options


• Adaptable to Rule bases

• Prewired automatic electro-magnetic switch with HD bilge pump


• High volume pump more GPH than competitive pumps


• Liquid cooled, 12 pole motor with double ball beraings


• Comes with 1-1/8" & 1-1/4" internally threaded duraports


• Includes removable check valve


• Adaptable to Rule bases


• 3 year warranty

GPH: 2200, Hose: 1-1/8" & 1-1/4", Volts: 12, Amps: 7.5

• Superior O-ring seal


• Sockets can be installed at bench or on deck and then snapped into place


• Eliminates crimping in hard to reach areas


• Reduces warranty claims and labor costs


• Builder, Dealer, and User friendly


• Proven performance and reliability


• Allows hose to swivel and relieve stress from pump outlets and other fittings


• Eliminates Silicone and other sealants at hose connections

Description: Straight, Size: 2.75" ? 1.75" ? 1.25"

Sold: Each

• Superior O-ring seal


• Sockets can be installed at bench or on deck and then snapped into place


• Eliminates crimping in hard to reach areas


• Reduces warranty claims and labor costs


• Builder, Dealer, and User friendly


• Proven performance and reliability


• Allows hose to swivel and relieve stress from pump outlets and other fittings


• Eliminates Silicone and other sealants at hose connections

Description: 90°, Size: 2.5" ? 1.75" ? 1.25"

Sold: Each

"Features an efficient, water-cooled motor with greater torque and less power consumption; a tough resin housing which resists shock, detergents, fuel and corrosives; a rugged impeller and a quick release bracket. 4 3/8" high. 3-Year warranty."

GPH: 500, Hose: 3/4", Volts: 12, Amps: 2.5

Sold: Each

Low profile pump design for ease of mounting and removal in tight bilge areas, especially suited for vessels with inboard or I/O engines.
Shaft seal: lip seal
Removable cartridge style, easy to clean
Water cooled motor
Complies to ABYC, NMMA and ISO8849 marine specifications
Made in U.S.A. 3 year warranty

• Shaft seal: lip seal


• Removable cartridge style, easy to clean


• Water cooled motor


• Complies to ABYC, NMMA and ISO8849 marine specifications


• 3 year warranty

GPH: 750, Hose: 3/4", Volts: 12, Amps: 3

"Features an efficient, water-cooled motor with greater torque and less power consumption; a tough resin housing which resists shock, detergents, fuel and corrosives; a rugged impeller and a quick release bracket. 4 3/8" high. 3-Year warranty."

GPH: 750, Hose: 3/4", Volts: 12, Amps: 3

Sold: Each

"Heavy-Duty bilge pumps integrate the highest quality bearings, brushes, alloys and magnets designed to withstand extreme usage cycles. The pump employs an exclusive shaft and motor compartment, reducing wear and significantly extending pump life. Enhanced Stainless steel motor shaft resists corrosion. Advanced resin compositions incorporated in exterior to resist chemicals such as engine oil, aggressive detergents and hose plasticizers. Unsurpassed durability and efficiency in a compact design. Locking tab and base swivel feature for unique mounting positions. Rotating outlet for improved hose installation. 36" wire leads. CE rated. 3-Year Warranty"

GPH: 1700, Hose: 1-1/8" I.D.", Volts: 12, Amps: 5.1

Sold: Each

"Heavy-Duty bilge pumps integrate the highest quality bearings, brushes, alloys and magnets designed to withstand extreme usage cycles. The pump employs an exclusive shaft and motor compartment, reducing wear and significantly extending pump life. Enhanced Stainless steel motor shaft resists corrosion. Advanced resin compositions incorporated in exterior to resist chemicals such as engine oil, aggressive detergents and hose plasticizers. Unsurpassed durability and efficiency in a compact design. Locking tab and base swivel feature for unique mounting positions. Rotating outlet for improved hose installation. 36" wire leads. CE rated. 3-Year Warranty"

GPH: 2000, Hose: 1-1/8" I.D.", Volts: 12, Amps: 6

Sold: Each

"Includes a 36" length of 16-gauge tinned, caulked copper wire. Permanent-magnet motor, stainless steel shaft, and steel-reinforced seal assure powerful, durable performance. Mercury-free design. All models are 5-1/2" L (not including hose nipple) 3-1/4" W x 4" H. 3-Year Warranty."

GPH: 1100, Hose: 1-1/8" I.D.", Volts: 12, Amps: 3.4, Pkg.: Clam

This self-priming diaphragm pump includes a built-in hydraulic pulsation dampener, will produce a dry prime suction lift of 6' and is corrosion resistant. Use for bilge, shower, and sink drain applications. OK to run dry. Permanent magnet type motor. Complies with USCG Electrical Standards 183.410 and ISO 8846 marine for ignition protection on gasoline powered vessels. NMMA type accepted. Includes Pumpgard™ strainer.

GPM: 3.4, Ports: 3/4", Volts: 12, Amps: 8

Sold: Each

These pumps have a liquid cooled, 12-pole motor w/double ball bearings and extra windings for long life.

• High volume pump-more GPH than competitive pumps


• Low amp draw-approximately an amp less draw than similar options


• Comes with 2 internally threaded duraports 1-1/8? and 1-1/2?


• Includes removable check valve


• Adaptable to Rule bases


• Made in USA


• 3 year warranty

• High volume pump more GPH than competitive pumps


• Low amp draw, approximately an amp less draw than similar options


• Comes with 1-1/8" &d 1-1/2" internally threaded duraports


• Includes removable check valve


• Adaptable to Rule bases


• 3 Year warranty

GPH: 2200, Hose: 1-1/8" & 1-1/4", Volts: 12, Amps: 7.5

These pumps have a liquid cooled, 12-pole motor w/double ball bearings and extra windings for long life.

• High volume pump-more GPH than competitive pumps


• Low amp draw-approximately an amp less draw than similar options


• Comes with 2 internally threaded duraports 1-1/8? and 1-1/2?


• Includes removable check valve


• Adaptable to Rule bases


• Made in USA


• 3 year warranty

• High volume pump more GPH than competitive pumps


• Low amp draw, approximately an amp less draw than similar options


• Comes with 1-1/8" &d 1-1/2" internally threaded duraports


• Includes removable check valve


• Adaptable to Rule bases


• 3 Year warranty

GPH: 2200, Hose: 1-1/8" & 1-1/4", Volts: 24, Amps: 4.5

These pumps have a liquid cooled, 12-pole motor w/double ball bearings and extra windings for long life. Includes removable check valve. Adaptable to Rule bases. Warranty: 18 months. Made in USA.

• High volume pump more GPH than competitive pumps


• Low amp draw, approximately an amp less draw than similar options


• Comes with 1-1/8" &d 1-1/2" internally threaded duraports


• Includes removable check valve


• Adaptable to Rule bases


• 3 Year warranty

GPH: 4000, Hose: 1-1/2" & 2", Volts: 12, Amps: 15

These pumps have a liquid cooled, 12-pole motor w/double ball bearings and extra windings for long life. Includes removable check valve. Adaptable to Rule bases. Warranty: 18 months. Made in USA.

• High volume pump more GPH than competitive pumps


• Low amp draw, approximately an amp less draw than similar options


• Comes with 1-1/8" &d 1-1/2" internally threaded duraports


• Includes removable check valve


• Adaptable to Rule bases


• 3 Year warranty

GPH: 4000, Hose: 1-1/2" & 2", Volts: 24, Amps: 7.5

Mounts pump securely inside bilge area on a vertical surface and releases it with just a snap. 110° bracket works with Cartridge and Cartridge Duo pumps.

Description: 110° Side Mount, Fits: Low Boy Pumps

Sold: Each