462-6-508901000
- 5 gpm output
- Self-priming up to 10 ft.
- Capable of extensive dry running
- Quiet running
- Flexible Installation
- Complies with USCG 183.410 and ISO 8846 MARINE (ignition protection)
- Fitting: Connections for 1-1/2" ID hose
- Size: 10.9" L x 6.1" W x 4.4" H
GPM: 5, Volts: 12, Ports: 1-1/2"
|
|
462-272-18555000A
- Run dry protection up to 30 seconds
- Pump housing connects onto the standard 3" waste outlet
- 6' Power leads with plug may be permanently attached to the vehicle or battery clips may be attached for portability
- Discharge port is a standard garden hose connector and the macerator section grinds waste down to a particle size of 1/8" maximum
- Pump longer distances and empty your holding tanks into a portable tank, toilet, sewer clean-out port or septic tank
Volts: 12, Inlet: 3"
|
|
462-272-18550000A
- RV macerator pump can empty a 30 gallon (115 liter) holding tank in 3 minutes
- Grinds waste into small particles for easy disposal
- Self-priming with a flow rate of 13 gpm (49 lpm)
- Pump can be permanently installed for easy holding tank evacuation into a toilet or plumbing clean out access
GPM: 13, Volts: 12, Amps: 16, Inlet: 3", Outlet: 1"
|
|
This Part has options, please click the button below to order.
462-189-10244530 + Option(s) A high speed rotary cutter shreds waste more efficiently, allowing the impeller to rotate faster producing a higher discharge capacity. The brass shredder, nitrile impeller and stainless steel shaft prevents corrosion and is resistant to chemicals. Design allows for direct interchange with other macerators for easy installation. Empties a 30 gallon holding tank in about 3 minutes. Suitable for bowl or holding tank discharge. Self priming to 5 feet. Ignition protected.
Amp draw: 15 max. Fuse size: 12 amp. Hose size: 1.5" intake. GPM: 10, Volts: 12 or 24
|
|
462-275-3200001 Designed specifically for sanitation waste and fish box evacuations. Features run dry capability and seamless shell motor with o-ring sealed end bells and a sealed manual turn key. Housing construction and unique dual, stainless steel serrated blades ensure problem free pumping. Self priming up to 3' lift. Thermally protected and ignition protected. Size: 10.79" x 3.82" x 4.48". Port size: inlet 1.5" barb/1.5"NPT, outlet 1" barb. 1 year warranty. GPM: 13, Volts: 12, Amps: 15
|
|
This Part has options, please click the button below to order.
462-78-53100 + Option(s)
- All stainless steel bolts to avoid corrosion problems
- Spring loaded Viton shaft seal is used to prevent premature leaks
- Our proprietary rubber impeller compound allows longer dry running time
- Macerator pump housing can be rotated in increments of 90 degrees to allow for left, right or top discharge
With Barb, GPM: 11, Volts: 12 or 24, Inlet: 1-1/2" Hose Barb, Outlet: 3/4" MNPT
|
|
462-6-185902092
- Self priming pump with run dry protection
- Triple sealed motor to prevent both internal & external motor corrosion.
- Four-bladed chopper reduces clogging.
- Flow rate to 12 gpm
- Self-priming to 4ft vertical lift.
- Complies with USCG 183.410 and ISO 8846 MARINE (Ignition Protection).
- Size: 11-3/8" L x 4-3/4" W x 3-5/8"H.
- Fitting: Inlet Port: 1-1/2" Hose Barb plus 1-1/2" NPT. Discharge Port: 1" Hose Barb.
GPM: 12, Volts: 12, Inlet: 1-1/2", Outlet: 1"
|
|
462-698-BP0527
- Toilet waste pump is made of high quality ABS plastic. Lightweight. Can be mounted in various orientations/positions
- Large non-choke valves. Tough plastic housing keeps in nasty smells. Easy to clean (no tools required)
- 14-3/4" gals per minute
- 1-1/2" inlet/outlet
- Max lift and max head of 15 ft.
- Mount: Bulkhead
|
|
462-698-BP2552B For holding tanks and vacuum systems. Virtually unblockable and self priming up to 9.8 ft. Can be mounted in most convenient part of boat. Easy to maintain and can run dry without damage. Pumps inmacerated waste. Fuse size 15 amp automotive Output(open flow) 4-3/4 gallons per minute. Wire size of 16 AWG. Max head and lift is 9.8 ft. Hose connections are 1-1/2".
Volts: 12, Ports: 1-1/2"
|
|
