462-108-906037 254 series. Improved screen design with built-in strainer. Color: White.
Model: CF254S, Size: 1-1/2" dia. "
Sold: Each
|
|
462-108-906035 254 series. Improved screen design with built-in strainer. Color: White. Model: CF254S, Size: 2" dia. " Sold: Each
|
|
462-23-38763 Mounts on transom slightly above water line to provide a water exit for boats with self-bailing cockpits. Flapper valve opens outward to allow water out of boat when necessary but seals back to prevent water from entering. Acetal construction. Accommodates 3875B thru-transom thru-hull connector (screw holes must be drilled for installation). Use as a replacement valve for 3881 thru-transom scupper.
Caution: Thru-hull connectors are designed for installation above the water line only. Size: 2-7/8" dia." Sold: Each
|
|
462-23-38811 "The popular 3876 scupper mounted to a 3875B 1-1/2" thru-hull as a complete assembly. Made of high-impact corrosion resistant white plastic with flapper valve that opens outward to dump water overboard and closes to help prevent backwash from entering cockpit. Installation hole size is 2"." Size: 6-1/4", Barb: 1-1/2", Max Hull Thickness: 3-1/8" Sold: Each
|
|
462-9-0285DP "Molded White plastic. Flush mount. For use when discharge is above waterline. Insert prevents passage of large objects without restricting water flow. Hose size is 1-1/2". Maximum hull thickness is 1-3/4". OD flange is 2-3/4". ID is 1-1/2"." : Sold: Each
|
|
462-114-02030810 - Molded white plastic with soft black flapper valve
- Uses #6 fasteners (Not included)
- Molded white plastic with soft black flapper valve
- Uses #6 fasteners (Not included)
Size: 2-7/8" Sold: Each
|
|
462-354-340041 Made from injection molded ABS. Uses #10 FH Fasteners. Bulk. Size: 5-5/8", Cut Out: 3-7/8", Color: White
|
|
462-354-3316011 Stamped 304 Stainless
Vent Area .85 Sq. In.
Fasteners: #6 RH - Stamped 304 Stainless
- Fasteners: #6 RH
- Vent Area .85 Sq. In.
A: 2-1/2", B: 2-1/8", Case: 10 Sold: Each
|
|
462-232-FD2DP Molded black plastic. Designed with a flange molded into part to fit into hole, hiding raw or cut edges. Mounts with 4 screws. Bulk packaging. Size: 4-1/4" dia. ", Hole: 2-1/2" dia. ", Case: 12 Sold: Each
|
|
462-232-FD4DP Molded black plastic. Designed with a flange molded into part to fit into hole, hiding raw or cut edges. Mounts with 4 screws. Bulk packaging. Size: 5-5/8" dia. ", Hole: 4" dia. ", Case: 12 Sold: Each
|
|
462-232-FMS10DP "Positive sealing ball scupper. Seal slotted to fit over 1-1/4" motorwell hole." : Sold: Each
|
|
462-9-0361005CHR For use with pipe chrome plated bronze body w/brass screen Hose: 3/4", Flange: 2" Sold: Each
|
|
462-9-0142001CHR Cast bronze. Rubber check ball. Complete with key. For use when discharge is below waterline. Angle of outlet is 45°. Screw size is #8. Use spare key 124878DP. Type: Chrome, Hose: 1", Flange: 3-1/4"
|
|
462-9-0142002CHR Cast bronze. Rubber check ball. Complete with key. For use when discharge is below waterline. Angle of outlet is 45°. Screw size is #8. Use spare key 124878DP. Type: Chrome, Hose: 1-1/2", Flange: 3-1/4" Sold: Each
|
|
462-354-5205001 Injection molded nylon. Carded. A: 2-13/16", B: 1-7/8" Sold: Each
|
|
462-9-0365DP "Molded white plastic with soft black flapper valve. Without thru-hull and mounting hardware. For surface mount applications. OD flange is 2-7/8"." : Sold: Each
|
|
462-232-CSD92DP - The check ball provides better sealing against reverse water flow that occurs when backing boat.
- Injection molded part is high strength and UV stabilized to provide value and durability
- Top of cockpit scupper drain is removable for cleaning
- 90° Outlet
Hole: 2-1/2" dia., Flange: 3-9/16", Fits: 1-1/2" Hose - The check ball provides better sealing against reverse water flow that occurs when backing boat.
- Injection molded part is high strength and UV stabilized to provide value and durability
- Top of cockpit scupper drain is removable for cleaning
- 90° Outlet
|
|
462-232-SA1DP "Mounts over 1" to 1-1/4" drain tubes
Grooved inside to fit over drain flange" " - Mounts over 1" to 1-1/4" drain tubes
- Grooved inside to fit over drain flange
" Color: Black Sold: Each
|
|
462-232-SA2BDP "Mounts over 1" to 1-1/4" drain tubes
Grooved inside to fit over drain flange" " - Mounts over 1" to 1-1/4" drain tubes
- Grooved inside to fit over drain flange
" Color: White Sold: Each
|
|
462-232-ILS1200DP - Prevents backwash
- Chemical resistant materials
- Thermo-plastic flapper
- Prevents backwash
- Chemical resistant materials
- Thermo-plastic flapper
Fits: 1-1/8" hose" Sold: Each
|
|
