602-90-304-A The paint color for all lower units is transitioning to black as inventory becomes depleted. Therefore, color may vary depending on product availability at time of order
This SE304 Gear Case replaces most early style Johnson/Evinrude V-4 Lower Units from 1978-1998 with a 4-1/8 bullet diameter. The case has internal Water Screens and a pointed cavitation plate at the rear.
The unit does not include the upper drive-shaft. If your old unit has a one piece shaft you will need to purchase an upper drive-shaft. We use the newer style stub-shaft with a clip. If your upper shaft is not the newer style you will need to replace it. Our unit does not include a Water Pump. Our unit does not include the shift shaft. You will need to reuse your old one and adjust it. You may paint the unit to match your Outboard.
|
|
602-90-306-B SE306 Uses the Ocean Pro style water intakes. Does not fit units older than 1978. The Bullet diameter is 4-3/4 inches. Will not replace Magnum or Lightning cases. Does not include Upper driveshaft. If your old unit has a one piece shaft you will need to purchase an upper driveshaft. We use the newer style stubshaft with a clip. If your upper shaft is not the newer style you will need to replace it. Our unit does not include a Water Pump. Our unit does not include the shift shaft. You will need to install your old one and adjust it. You will need to use a 1991 or newer prop thrust washer.
The paint color for all lower units is transitioning to black as inventory becomes depleted. Therefore, color may vary depending on product availability at time of order. You may paint the unit to match your Outboard.
Fits OMC-1-83-R-V-6-5005401
|
|
602-90-306-C SE306 Uses the Ocean Pro style water intakes. Fits V4 Johnson/Evinrude with the 4-3/4 bullet diameter V6 case. Uses the Ocean Pro style water intakes. Does not include Upper driveshaft. If your old unit has a one piece shaft you will need to purchase an upper driveshaft. We use the newer style stubshaft with a clip. If your upper shaft is not the newer style you will need to replace it. Our unit does not include a Water Pump. Our unit does not include the shift shaft. You will need to install your old one and adjust it. You will need to use a 1991 or newer prop thrust washer.
The paint color for all lower units is transitioning to black as inventory becomes depleted. Therefore, color may vary depending on product availability at time of order. You may paint the unit to match your Outboard.
Fits OMC-2-25-R-V-6 With V-4-Ratio-0439982
|
|
602-90-305-A The paint color for all lower units is transitioning to black as inventory becomes depleted. Therefore, color may vary depending on product availability at time of order. Replaces most later model Johnson V-4 Lower Units from 1995-2006 with a 4-1/8 bullet diameter. Has external water screens and the rear cavitation plate is flat. Does not include Upper driveshaft. If your old unit has a one piece shaft you will need to purchase an upper driveshaft. We use the newer style stubshaft with a clip. If your upper shaft is not the newer style you will need to replace it.
Our unit does not include a Water Pump. Our unit does not include the shift shaft. You will need to install your old one and adjust it. You may paint the unit to match your Outboard.
|
|
602-90-308-B The paint color for all lower units is transitioning to black as inventory becomes depleted. Therefore, color may vary depending on product availability at time of order. SE308 is a Counter Rotation Unit. Gear Ratio is 1.83:1
Fits-OMC-1-83-R-V-6-Counter-Rotation
|
|
602-90-316-A Replacement unit for Johnson Evinrude Magnum and Magnum 2 lower units.
It is a direct replacement for the Mag II
If you are replacing a Mag (the original) you will need to remove the alignment pins from the new lower unit.
They are only offered in Black.
Does not come with upper drive shaft, shift shaft, water pump or water intake screens.
Replaces OE#'s 5007699 5009081 5009259 5007705 5009082 5009260
|
|
602-90-318-A Replacement unit for Johnson Evinrude Magnum and Magnum 2 lower units.
It is a direct replacement for the Mag II
If you are replacing a Mag (the original) you will need to remove the alignment pins from the new lower unit.
They are only offered in Black.
Does not come with upper drive shaft, shift shaft, water pump or water intake screens.
Replaces OE#'s 5007699 5009081 5009259 5007705 5009082 5009260
|
|