Carburetor - Tohatsu

Blue LED Lighted Low Profile Push Button Switch

These switches are available in:
• Standard off/on
• Momentary on/off
• LED Light turns blue when activated, no light when off.
• 19 MM hole size.
• O.D. of Switch is 0.85 in
• 10 Amp
• Includes O-Ring 
• Wire Harness Included

Blue LED Lighted Low Profile Push Button Switch

• standard off/on
• LED Light turns blue when activated
• 22 MM hole size
• O.D. is 0.96 inch
• 15 Amp
• Molded Harness

Blue LED Lighted Low Profile 19mm Push Button Switch

• Standard off/on
• Fixed Translucent Button
• LED Light turns blue when activated
• 19 MM hole size
• Molded Harness

Small and Large Connector Pins for 19mm and 22mm Switches

These pins are required if you want to build your own harnesses. This will allow you to build your own harnesses with wiring to your spec. These are the connectors only. No wiring or plugs are included.

Daisy Chain Connectors for LED and Ground on Bluewater Switches 19mm and 22mm

(516-9050-0030) Blue is to daisy chain the LED wires on Bluewater Switches. (516-9050-0025) Black is to daisy chain the Ground wires on the Bluewater Switches. (516-9050-0035) Orange is to daisy chain the Power wires on the Bluewater Switches.

Deutsch Plug ONLY for 19mm and 22mm Switches

These plugs are required if you buy switches without wire harnesses. This will allow you to build your own harnesses with wiring to your spec. These are the plug only. No wiring or connectors are included.

Deutsch Plug with 12" Wire lead for 19mm and 22mm Switches

These plugs are required if you buy switches without wire harnesses. This will allow you to splice together your boat's wiring harness to the switch.

Deutsch Plug with 36" Wire lead for 22mm Switches

These plugs are required if you buy switches without wire harnesses. This will allow you to splice together your boat's wiring harness to the switch.

Function Labels for 19MM Push Button Switches 

Identifying the function of each push button switch is simple with the interchangeable 3M adhesive backed actuator PU Dome Backlit Labels. These labels are used when using translucent actuator buttons that allows the LEDs in the switch body to pass light through the label. The result is excellent visibility at night. There are over 100 Switch Function Icons to choose from.

• Over 100 Interchangeable 3M Adhesive Backed PU Dome Backlit Function Icon Labels to choose from.
• Light passes through clear part of label
• Used with 19mm switches with the translucent label option

Function Labels for 22MM Push Button Switches 

Identifying the function of each push button switch is simple with the interchangeable 3M adhesive backed actuator PU Dome Backlit Labels. These labels are used when using translucent actuator buttons that allows the LEDs in the switch body to pass light through the label. The result is excellent visibility at night. There are over 100 Switch Function Icons to choose from.

• Over 100 Interchangeable 3M Adhesive Backed PU Dome Backlit Function Icon Labels to choose from.
• Light passes through clear part of label
• Used with 22mm switches with the translucent label option

Dual USB Port Charger Socket

• 12V DC Dual USB Charger dash mount with protective cap
• Twin USB 2.0 Female ports
• Compatible with popular mobile devices
• Easy to use
• LED lit by blue LED's
• Max output charge 4.8A DC total (2.4A Per Port)
• Output Voltage 5V DC+/- 5%
• Hole Size: 1"
• Thread Length: 1-5/8"

Dual USB Port Charger Socket

• 12V DC Dual USB Charger dash mount with protective cap
• USB Female port
• USB-C Female port
• Compatible with popular mobile devices
• Easy to use
• Max output charge 4.8A DC total (2.4A Per Port)
• Output Voltage 5V DC+/- 5%
• Hole Size: 1"
  

2-position Off/Push to On

These switches are perfect as starter buttons or can be used in just about any momentary type operation. Each switch features brass construction with a chrome plated nut and button for good looks. There is also a moisture repellent rubber cap sold separately.

Replacement Plastic Nut for 19mm and 22mm Switches

Replacement for the stock plastic nut on Bluewater switches.

Stainless Steel Nut for 19mm and 22mm Switches

Replace the stock plastic nut with these stainless steel nuts for extra durability and longevity.