150-S17672 .005 Undersized Stainless Steel Wear Ring - I.D. Installed is 7.245-7.247
Each Berkeley wear ring is constructed from seamless stainless steel. By using a seamless wear ring Berkeley can CNC machine these wear rings to exacting tolerances. These wear rings are not stepped so that there is nowater deflection to the impeller.
|
|
150-S17673 .010 Undersized Stainless Steel Wear Ring - I.D. Installed is 7.240-7.242
Each Berkeley wear ring is constructed from seamless stainless steel.
By using a seamless wear ring Berkeley can CNC machine these wear rings to
exacting tolerances. These wear rings are not stepped so that there is no
water deflection to the impeller.
|
|
150-S15879 .015 Undersized Stainless Steel Wear Ring - I.D. Installed is 7.235-7.237
Each Berkeley wear ring is constructed from seamless stainless steel.
By using a seamless wear ring Berkeley can CNC machine these wear rings to
exacting tolerances. These wear rings are not stepped so that there is no
water deflection to the impeller.
|
|
150-S17674 .020 Undersized Stainless Steel Wear Ring - I.D. Installed is 7.230-7.232
Each Berkeley wear ring is constructed from seamless stainless steel.
By using a seamless wear ring Berkeley can CNC machine these wear rings to
exacting tolerances. These wear rings are not stepped so that there is no
water deflection to the impeller.
|
|
150-S17675 .025 Undersized Stainless Steel Wear Ring - I.D. Installed is 7.225-7.227
Each Berkeley wear ring is constructed from seamless stainless steel.
By using a seamless wear ring Berkeley can CNC machine these wear rings to
exacting tolerances. These wear rings are not stepped so that there is no
water deflection to the impeller.
|
|
150-S15880 .030 Undersized Stainless Steel Wear Ring - I.D. Installed is 7.220-7.222
Each Berkeley wear ring is constructed from seamless stainless steel.
By using a seamless wear ring Berkeley can CNC machine these wear rings to
exacting tolerances. These wear rings are not stepped so that there is no
water deflection to the impeller.
|
|
150-S15881 .045 Undersized Stainless Steel Wear Ring - I.D. Installed is 7.205-7.207
Each Berkeley wear ring is constructed from seamless stainless steel.
By using a seamless wear ring Berkeley can CNC machine these wear rings to
exacting tolerances. These wear rings are not stepped so that there is no
water deflection to the impeller.
|
|
152-SHK4007 Shim Kit required with shouldered wear ring.
Each kit contains:
(1) .002 Shim
(1) .005 Shim
(1) .015 Shim
(1) .035 Shim
(1) .050 Shim
|
|
150-S10126 Berkeley Original Equipment Shouldered Stainless Steel Wear Ring
The Berkeley stainless shouldered wear ring can be used as a blueprintingtool to tighten the pump clearances. The shoulder puts a tighter seal to thefront of the impeller and by shimming the impeller back it also creates atighter seal on the back of the impeller to the bowl as well. Keep in mind thatto use the shouldered wear ring you must also purchase a shim kit part 152-K4007 to set the correct end clearance (.030 / .040) between the shoulder and thefront edge of the impeller
Dimensions:
- Standard Size - I.D. Installed is 7.250-7.252
|
|
150-S10125 Berkeley Original Equipment Standard Size Stainless Steel Wear Ring - I.D.
Installed is 7.250-7.252
Each Berkeley wear ring is constructed from seamless stainless steel.
By using a seamless wear ring Berkeley can CNC machine these wear rings to
exacting tolerances. These wear rings are not stepped so that there is no
water deflection to the impeller. The clearance between the wear ring and impeller should be 0.025 when installed. When replacing a wear ring on an existing impeller measure the diameter of the impeller and consider an undersize wear ring if needed.
|
|