This controller will operate both normal RGB (Red, Green, & Blue) and RGBW (RGB + White).
PlashLights waterproof Bluetooth controller is operated via a mobile phone app to turn on/off, adjust the brightness or color, adjust color temperature, and change preset color patterns. There are a variety of lighting patterns to choose from.
The operation is very simple with mobile phone control (IOS or Android). Your phone is not needed when a switch is installed as the lights will defer to the last setting when powered on (Example: If you have them on a blue stobe pattern and turn the power of at a switch or the Perko, when power is applied at a later date the lights will be on blue strobe). Basically, your phone is only required to change the color or patterns.
-
Requires download of PlashLights APP (FREE)
- Simple to mount with a tab on each side
- IP67 Rated Enclosure = Waterproof
- Easily control and synchronize up to 240 Watts of lighting
- 15A when RGB used (5A/per channel)
- 20A when RGB+W used (5A/per RGB channel & 5A white)
- Compatibility: bluetooth 4.0 (bluetooth phones of 4.0 or above)
- Supports mobile phone system: IOS 6.0 android 4.3 or above
- Operating Voltage: 12~24V DC
- Software language: English
- Control distance: 65 feet
- Size: 3-13/16" long x 1-1/4" tall x 1-15/16" wide
- Working temperature: - 4°F to 145°F
100% MADE & ASSEMBLED IN USA
Control Operations:
- Instructions included on APP
Includes Multi-Zone Sync Feature:
- Control multiple zones with multiple controllers as they will all sync together (each controller is sold separately)
Notes:
- Do not place RGBW controller inside a metal container as it will block the signal.
- Double check your incoming voltage as this controller cannot accept reverse polarity, AC, or DC voltage over 24V.
