625-4115 Ram Force Cam Driven Water Pump - Magnaflow Replacement, Neovane Replacement
Replace old Neovane and Magnaflow pumps with this new design! The new Hardin Marine "Ram-Force" series cam driven water pump is the latest evolution of cam driven pump design. These pumps are manufactured from premium billet 6061-T6 aluminum and utilize a 316L stainless steel impeller housings. The Ram Force pump utilizes a precision ground pump shaft for strength and dual roller bearings for long life. A large 8 vane rubber impeller that draws water through a 3/4" NPT single inlet and exits water flow through dual 3/4" NPT ports. The ports are located to provide the clearest path for easy plumbing to the engine block water inlets This pump allows plenty of clearance for up to 8" diameter harmonic balancers. Pump is 5-1/4" long from timing cover mounting face to end of pump.
Note: Includes Gasket, replacement gaskets available here: 625-4277. Use of this pump requires a 6" diameter or smaller crankshaft accessory drive pulley example 740-64201 (see related parts)
Click here to find replacement parts for this pump.
|
|
625-4237 This is a rebuild kit for Gen I 625-4115 Ram Force Pumps.
|
|
625-4236 This is a rebuild kit for Generation I 625-4115 Ram Force Pumps.
|
|
625-4239 IThis is a rebuild kit for Gen II 625-4115 Ram Force Pumps.
|
|
625-4238 This is a rebuild kit for Generation II 625-4115 Ram Force Pumps.
|
|
500-1001 Replacement Impeller for Magnaflow Water Pump
This is a 8 vane impeller for use with the 500-1000 Magnaflow water pumps. Measures 2-5/8" wide by 2" tall. O-rings and gaskets sold separately.
|
|
500-1010 Replacement Impeller for 3/4" Magnaflow Water Pump
This is a 12 vane impeller for use with the 3/4" Magnaflow water pump. 500-1007 O-Rings Sold Separately. Measures 1-5/8" wide.
|
|
625-4011
- Replaces Impellers on Hardin Ram Force, Multi-Stage, Lifetime Series Pumps.
- D Shaped Shaft AKA "Single Flat"
- 8 Vane Impeller
- Replacement Impeller For Mercury OEM Sea Pumps
- Replaces OEM Mercruiser # 47-59362T1
|
|
500-1003 Replacement Impeller for Magnaflow Water Pump
This is a 12 vane impeller for use with the 500-1000 Magnaflow water pump. This is an impeller only, does not include replacement gaskets or o-rings. Measures 2-5/8" wide by 2" tall.
|
|
500-894000 Big Block Chevy Gen 6 Water Pump Cam Drive
These cam drives bolt to the front of an engine's camshaft. The male
tab that protrudes from the drive is designed to fit most cam driven water
pumps.
|
|
500-894002 Cam Drive Only, Ford 460
These cam drives bolt to the front of an engine's camshaft. The male
tab that protrudes from the drive is designed to fit most cam driven water
pumps.
|
|
500-894001 Chevy Cam Drive Only, Small Block & Big Block Gen 4 & 5
These cam drives bolt to the front of an engine's camshaft. The male
tab that protrudes from the drive is designed to fit most cam driven water
pumps.
|
|
This Part has options, please click the button below to order.
MULTIPLE PART NUMBER OPTIONS. CLICK PART OPTIONS FOR MORE INFO -> 2", 3" and 5" Pump Extension for Cam Driven Pumps
These allow for that extra clearance you may need for your cam driven
water
pump to clear maybe a supercharger belt. To install, remove current female slot cam drive adapter from your pump and install extended adapter. Use loc-tite on the set screw. Install extension housing onto pump and then reinstall pump onto the engine.
|
|
625-4277 Fits Magnaflow, Ram Force pumps and more.
|
|
500-1005 Magnaflow Shaft Seal Kit
Brass seal ID 0.65", OD 1.13".
White seal ID 0.625", OD 1"
|
|
500-1004 Replacement Bearing for Glenwood Magnaflow Cam Driven Water Pumps.
|
|
500-1007 Magnaflow Front Cover O-Ring
|
|
