Accessories - Billet Marine Hardware

1-1/2" Aluminum Flush Style Fuel Fill

These great looking fuel fills are extremely low profile. Each cap features unique finger grips on the perimeter of the cap allowing easy removal and installation. All mounting hardware is covered when the cap is installed.

Each cap features :
• an O-ring seal
• a 1-1/2" hose connection
• and is vented.

Height 2-3/16" x Width 3-1/2" Overall,  Hose Dia. 1-1/2"

See what each of our powder-coated finishes (both flat and glossy) look like under different lighting here!

1-1/2" Billet Flip Lid Fuel Fill

These low profile style billet fuel fills use an integrated flip-up style lid that aids in opening and closing the fuel fill. The cap is threaded and screwed into the inner flange covering all mounting hardware. Each cap is vented with a small drilled hole and features an O-ring seal and a 2" hose connection. The vent hole is threaded and can be plugged with a pipe plug (not included) if desired.

Height 2-1/2" x Width 3-1/2" Overall, Hose Dia.1-1/2"

See what each of our powder-coated finishes (both flat and glossy) look like under different lighting here!

7" Single Grip Billet Aluminum Grab Handle - Each

Hardin Marine offers this popular grab handle constructed from billet aluminum in both a single hand 5" and 7" versions and a dual hand 10"version. Both handles feature blind tapped holes allowing them to be mounted with no hardware exposed. These handles work great in conjunction with the Hardin Marine billet vents.

*Note- These grab handles are 9" long with 7-5/16" bolt centers

See what each of our powder-coated finishes (both flat and glossy) look like under different lighting here!

Billet Aluminum "ST" Control

These attractive billet aluminum "ST" controls are a great upgrade from your chrome style "ST" control These controls are precision machined to be a direct replacement of standard "ST" controls and offer a modern updated appearance to any boat. Powder Coated finish.

Billet Aluminum Accent Knob For "ST" Controls

These precision machined billet aluminum knobs are a perfect way to accent some color into your boat. The knobs are a standard "ST" thread. Available in all popular colors.

These hose and cable bezels are manufactured from billet aluminum and available in powdercoated finish or polished. These are an ideal solution for routing braided line, hoses or cables through your transom or bulkhead.

See what each of our powder-coated finishes (both flat and glossy) look like under different lighting here!

Billet Aluminum Positive Locking 3-Position Shift Controls

• The mounting holes are: 10/32 threads
• The handle of this control measures 7-1/4" from pivot center.
• It has 3 equidistant locking positions.
• It does not come with any mounting hardware.

This control gives positive locking engagement and is fabricated from the same 6061-T6 aluminum as the standard unit. This unit uses a smooth operating button release for effortless engagement and offers the security of locked control. We also offer a Turbo shift control for those of you running this transmission: The turbo 400 shifter.

Billet Aluminum Positive Locking 6-Position Shift Control for TH400 transmissions

This control gives positive locking engagement and is fabricated from the same 6061-T6 aluminum as the standard unit. This unit uses a smooth operating button release for effortless engagement and offers the security of a locked control. Mounts with #10-32 bolts on the back side.

Billet Aluminum Powdercoated Angled 4" Gauge Bezels - Limited Colors and Quantities

These are a 4" gauge bezels, an uncommon size, with limited quantities and colors available. These are old stock and not in 100% perfect condition.

See what each of our powder-coated finishes (both flat and glossy) look like under different lighting here!

These bezels add a touch of color to your cleats. 8.25" x 2" ID.  8.75" x 2.75" OD. NOTE: We do not sell the cleats that fit these bezels. Please check the size of your cleats before ordering.

See what each of our powder-coated finishes (both flat and glossy) look like under different lighting here!

Billet Fire Extinguisher Bracket - 2-1/2 LB, 3" Bracket

Not all billet extinguisher brackets are alike! Although most are attractive looking, that's where the similarities end. The real thing you should be looking for in addition to good looks is functionality. Compare these features and you'll see why the only wise choice is a Hardin Marine Billet Bracket.

First the Hardin Marine bracket lets the extinguisher push straight in and pull straight out while other style brackets require you to slide in from the end of the bracket allowing limited mounting locations. Also the Hardin Marine bracket has built-in nylon adjustment pads to create a rattle free extinguisher mount, another feature missing from other brands. Lastly the 4-3/8" X 2" rectangular mounting pad allows you to use four attaching fasteners, something a round pad doesn't offer. So if you would like the best built, best functioning, and best looking extinguisher bracket as for the Hardin Marine bracket by name.

Billet Pop-Up Bow Light Bezel (Each)

This bezel is machined form 1/4" 6061-T6 billet aluminum. It is designed to fit the stainless steel pop-up bow lights #680-204-M and 680-211-M.  Available polished or in your choice of powder coated colors.

Does not fit the LED Pop-Up Bow Light (730-LEDPUBL)
Fits: Pop-up LED bow light 680-211M and Pop Light 680-204M

GOLD Powdercoat Billet Aluminum Switch Knobs - Limited Styles and Quantity

These billet aluminum switch knobs are perfect for accenting and tying in the color of your boat if you happen to like gold. They simply thread on to all 10-32 standard switches. These are available in limited quantities and styles. 

Grab Handle Bezels Fits 950-47816X Handles

These powder coated bezels will fit the 950-47816X Grab Handles. 1.630" OD, 1.250" ID Register, 0.500" Center Bolt Hole

See what each of our powder-coated finishes (both flat and glossy) look like under different lighting here!

Short Billet Vent 7-1/2" x 3-1/2" - Each

These long style billet aluminum vents offer the provision to use a bilge blower hose to exhaust fumes in your engine compartment. Each vent measures 7-1/2" x 3-1/2" and each of these will accommodate the short style billet grab handles.

See what each of our powder-coated finishes (both flat and glossy) look like under different lighting here!

Slimline Flat Style Billet Aluminum Powder Coated Gauge Bezels

• 2-1/16" ID, 2-1/2" OD
• 3-3/8" ID, 3-7/8" OD

See what each of our powder-coated finishes (both flat and glossy) look like under different lighting here!

Slimline Flat Style Billet Aluminum Powder Coated Gauge Bezels - Limited Availability!

• 2-1/16" ID, 2-1/2" OD
• 3-3/8" ID, 3-7/8" OD

See what each of our powder-coated finishes (both flat and glossy) look like under different lighting here!

Specialty Angled Style Billet Aluminum Powder Coated Gauge Bezels

These bezels are in rare or specialty sizes. None of these bezels will fit gauges that we sell. These are available in limited quantities only and some specific colors.

Sizes:
• 3-1/8" ID
  
Angled bezels have a 15 degree angle

See what each of our powder-coated finishes (both flat and glossy) look like under different lighting here!

Specialty Flat Style Billet Aluminum Powder Coated Gauge Bezels

These bezels are in rare or specialty sizes. None of these bezels will fit gauges that we sell.

• 3-1/8" ID, 4" OD
• 3-3/4" ID, 4-1/2" OD

See what each of our powder-coated finishes (both flat and glossy) look like under different lighting here!