Accessories - Trailer Accessories

3/8" Stainless Eyelet

These are high grade stainless eyelets in 3/8" diameters. The eyelets can also be used on the transoms or bow of boats for tie downs or tow hooks. 3" Thread Length. 4-1/2" Overall length. 1-1/2" pin center to center.

1/2" Stainless Eyelet

These are high grade stainless eyelets in 1/2" diameter. The eyelets can also be used on the transoms or bow of boats for tie downs or tow hooks. 3" of thread length. Dimensions: Size: 1/2", Overall Length: 4-3/4", Threaded Length: 3", Pin Center to Center: 1-7/8"

Bow Eye SS 1/2" x 3-7/16"

Seadog Stainless Steel Bow Eyes come with adjustable finished nuts for a strong and secure hold.

• Plate Size: 3" x 3/4"

Bow Eye SS 3/8" x 3-1/2"

Seadog Stainless Steel Bow Eyes come with adjustable finished nuts for a strong and secure hold

Bow Eye SS 3/8" x 1-1/2"

Seadog Stainless Steel Bow Eyes come with adjustable finished nuts for a strong and secure hold.

• 2-1/4" x 3/4"

Bow Eye SS 7/16" x 3-1/2"

Seadog Stainless Steel Bow Eyes come with adjustable finished nuts for a strong and secure hold.

• 3" x 3/4"

Bow Eye Chrome Zinc 3/8"

The Seadog Bow Eye has a die cast zinc chrome plated head and a galvanized shaft.

• 3/8" NC thread
• 2-9/16" bolt length
• 5-1/8" total length

D-Shackle SS 5/16"

The Seadog Stainless Steel D-Shackles have an investment cast 316 stainless steel construction that withstands the marine environment.

• Size: (A) 5/16" (B) 5/8" (C) 1-1/8"

COUPLER LOCKING PIN GALV 1/4"

The Seadog Coupler Pins have a steel electro galvanized construction.

Features:
• Size: (A) 1/4" (B) 3" (C) 1-13/16" (D) 7/16" (E) 13/16"

Coupler Locking Pin Galv 5/16"

The Seadog Coupler Pins have a steel electro galvanized construction.

• Size: (A) 5/16" (B) 3" (C) 2" (D) 5/8" (E) 7/8"

Trailer Coupler Pin

Whether your searching for a quick easy to use trailer coupler pin or the security that your trailer will be there when your back from boating this is the piece you need. In these most recent years we have seen our customers victimized by trailer thieves, protect your investment.

Trailer Coupler Lock

Whether your searching for a quick easy to use trailer coupler pin or the security that your trailer will be there when your back from boating this is the piece you need. In these most recent years we have seen our customers victimized by trailer thieves, protect your investment.

Bent Pin Receiver Lock 5/8"

Fulton Bent Pin Receiver Locks fit crossways into the hole on trailer receivers and are secured with a deadbolt lock. They are constructed with a cast aluminum housing with chrome plating. The key slot has a dust cap to prevent corrosion and will fit Class I, II, III and IV hitches. 2 keys are provided.

• 5/8" Pin fits 2"x2" receivers

McGard- Chrome Cone Seat Trailer 2 Wheel Lock Set

• Overall Lock Length: 1.46"
• Thread Size: 1/2" - 20
• Hex Size: 13/16"
• Cone Seat Style Wheel Locks
• Set of 2 Locks and 1 Key

McGard wheel locks & lug nuts for boat trailers are made to the same proven quality as our automotive line of products. For steel or alloy wheels, simply replace one of the lug nuts with a McGard wheel lock. Our wheel locks and matching lug nuts are machined from high quality steel, through-hardened and then triple-nickel chrome plated for durability and long-lasting beauty. Every McGard Lug Nut is guaranteed for life not to rust, chip, or peel!

McGard- Chrome Cone Seat Trailer 4 Wheel Lock Set

• Overall Lock Length: 1.46"
• Thread Size: 1/2" - 20
• Hex Size: 13/16"
• Cone Seat Style Wheel Locks
• Set of 4 Locks and 1 Key

McGard wheel locks & lug nuts for boat trailers are made to the same proven quality as our automotive line of products. For steel or alloy wheels, simply replace one of the lug nuts with a McGard wheel lock. Our wheel locks and matching lug nuts are machined from high quality steel, through-hardened and then triple-nickel chrome plated for durability and long-lasting beauty. Every McGard Lug Nut is guaranteed for life not to rust, chip, or peel!

4-Flat Car Only Connect 18"

Wesbar 4-Flat Car End Connectors are standard 4-way female harnesses with 18 gauge bonded wires. The wires have Taillight/Stop/Turn functions printed on them for easy identification. They conform to SAE Specification J1128 and have a maximum amperage of 7.5 per circuit.

• 48" Long
• 18" Ground

4-Flat Car Only Connect 6'

Wesbar 4-Flat Car End Connectors are standard 4-way female harnesses with 18 gauge bonded wires. The wires have Taillight/Stop/Turn functions printed on them for easy identification. They conform to SAE Specification J1128 and have a maximum amperage of 7.5 per circuit.

• 6' Long
• 6' Ground
• Includes wire taps

4 Foot Transom Tie downs (pair)

Powerweb Tie downs feature over center style locking buckles to provide the most secure attachment for your boat to trailer needs. These tied owns are 4' long and have rubber hooks so there's no need to worry about scratching anything. 750 lb. rated capacity. Working load 250 lbs. 1" wide band.

McGard- Chrome Cone Seat Style Trailer Lug Nut Set

• Overall Lug Nut Length: 1.50"
• Thread Size: 1/2" - 20
• Hex Size: 13/16"
• Cone Seat Style Lug Nuts
• Set of 10 Lug Nuts

McGard wheel locks & lug nuts for boat trailers are made to the same proven quality as our automotive line of products. For steel or alloy wheels, simply replace one of the lug nuts with a McGard wheel lock. Our wheel locks and matching lug nuts are machined from high quality steel, through-hardened and then triple-nickel chrome plated for durability and long-lasting beauty. Every McGard Lug Nut is guaranteed for life not to rust, chip, or peel!

Boat Guide Kit 44"

Fulton Boat Guide Kits feature non-marring, marine grade PVC uprights that install on trailer frames up to 3" x 5" and do not require any drilling to mount. Each kit includes a pair of guides and U-bolt mounting hardware.

• Size: 44" Upright height