Outboards - Outboard Aftermarket Accessories

Outboard Swivel Thru Hull Rigging Flange Kit - Fits 2" ID / 2.5" OD Hose

While the rest of the world is stuck in just one spot Hardin Marine has taken on the challenge to design the freedom of movement for your outboards rigging hose connection. With more movement than ever from today's popular outboard engines when being trimmed or stored for travel the industry has been faced with kinked rigging hoses and cowling damage due to the rigid hoes connection option that has only been available until now.

Hardin's new  non-corrosive 2264 Delrin directional swivel hose connection provides 12 degrees of angle for hose/ tube movement and a water tight seal. With hidden non-exposed mounting hardware this unit features the ultimate in a clean smooth finish.

Attachment of the rigging hose couldn't be easier as the unit is threaded so that the rigging hose screws counter clockwise into the swivel ball connector requiring no additional hardware for hose attachment for the ultimate in finished appearance.

The 3/4" tall flange has a 5" diameter OEM factory mounting foot print. and requires a 3-3/8” hole to install with (4) #10 fasteners (NOT included). The Connector assembly measures 2-1/2" overall installed height.

This Multi angle rigging tube connector is available in a OEM black finish or with an optional polished or powdercoated Stainless Steel trim ring both individually or as a kit with rigging hose.

Kits include a Transom swivel connector and 5' long 2-1/2' diameter premium corrugated black, gray or white rigging hose that is durable, flexible, and kink resistant to provide an excellent protection for cables and wiring from dirt, abrasion, sun and water. Our rigging hose is the hose of choice for most OEM boat builders.

Swivel Rigging Connector Only - Fits 2" ID / 2.5" OD Hose - Hose Not Included

While the rest of the world is stuck in just one spot Hardin Marine has taken on the challenge to design the freedom of movement for your outboards rigging hose connection. With more movement than ever from today's popular outboard engines when being trimmed or stored for travel the industry has been faced with kinked rigging hoses and cowling damage due to the rigid hoes connection option that has only been available until now.

Hardin new non-corrosive 2264 Delrin directional swivel hose connection provides 12 degrees of angle for hose/ tube movement and a water tight seal. With hidden non-exposed mounting hardware this unit features the ultimate in a clean smooth finish.

Attachment of the rigging hose couldn't be easier as the unit is threaded so that the rigging hose screws counter clockwise into the swivel ball connector requiring no additional hardware for hose attachment for the ultimate in finished appearance.

The 3/4" tall flange has a 5" diameter OEM factory mounting foot print. and requires a 3-3/8” hole to install with (4) #10 fasteners (NOT included). The Connector assembly measures 2-1/2" overall installed height.

This Multi angle rigging tube connector is available in a OEM black finish or with an optional polished Stainless Steel, or powder coated trim ring both individually or as a kit with rigging hose.

Outboard Swivel Thru Hull Rigging Flange Kit - Fits Large 2.5" ID / 3" OD Hose

While the rest of the world is stuck in just one spot Hardin Marine has taken on the challenge to design the freedom of movement for your outboards rigging hose connection. With more movement than ever from today's popular outboard engines when being trimmed or stored for travel the industry has been faced with kinked rigging hoses and cowling damage due to the rigid hoes connection option that has only been available until now.

Hardin's new  non-corrosive 2264 Delrin directional swivel hose connection provides 12 degrees of angle for hose/ tube movement and a water tight seal. With hidden non-exposed mounting hardware this unit features the ultimate in a clean smooth finish.

Attachment of the rigging hose couldn't be easier as the unit is threaded so that the rigging hose screws counter clockwise into the swivel ball connector requiring no additional hardware for hose attachment for the ultimate in finished appearance.

The 3/4" tall flange has a 5" diameter OEM factory mounting foot print. and requires a 3-3/8” hole to install with (4) #10 fasteners (NOT included). The Connector assembly measures 2-1/2" overall installed height.

This Multi angle rigging tube connector is available in a OEM black finish or with an optional polished or powdercoated Stainless Steel trim ring both individually or as a kit with rigging hose.

Kits include a Transom swivel connector and 5' long 2-1/2' diameter premium corrugated black, gray or white rigging hose that is durable, flexible, and kink resistant to provide an excellent protection for cables and wiring from dirt, abrasion, sun and water. Our rigging hose is the hose of choice for most OEM boat builders.

Swivel Rigging Connector Only - Fits Large 2.5" ID / 3" OD Hose Version - Hose Not Included

While the rest of the world is stuck in just one spot Hardin Marine has taken on the challenge to design the freedom of movement for your outboards rigging hose connection. With more movement than ever from today's popular outboard engines when being trimmed or stored for travel the industry has been faced with kinked rigging hoses and cowling damage due to the rigid hoes connection option that has only been available until now.

Hardin new non-corrosive 2264 Delrin directional swivel hose connection provides 12 degrees of angle for hose/ tube movement and a water tight seal. With hidden non-exposed mounting hardware this unit features the ultimate in a clean smooth finish.

Attachment of the rigging hose couldn't be easier as the unit is threaded so that the rigging hose screws counter clockwise into the swivel ball connector requiring no additional hardware for hose attachment for the ultimate in finished appearance.

The 1" tall flange has a 5.37" diameter mounting foot print. and requires a 4” hole to install with (4) #10 fasteners (NOT included). The Connector assembly measures 2.36" overall installed height.

This Multi angle rigging tube connector is available in a OEM black finish or with an optional polished Stainless Steel, or powder coated trim ring both individually or as a kit with rigging hose.

Operating a multi-engine offshore powerboat can be a little overwhelming at times.  That’s probably why offshore racing is the only motorsport that requires two drivers. Most offshore boats have an engine trim button built into the throttle lever handle.  We all know that the drives rarely stay perfectly even using just the BOTH button on the throttles.  Having them offset can impact handling, and can be dangerous at high speeds.  So that after a couple of moves we are all reaching to the dash to try and even them out.  Over and over again.

TrimSync is a patent pending device that monitors the trim for twin and triple engine boats, so when the operator presses the BOTH/ALL button, it will automatically adjust the drives to be in perfect alignment, every time.  You will never have to worry about how accurate your mechanical trim indicators are because TrimSync will always move the slowest drive to match the others.  There are no extra buttons or complicated operating instructions, just push the BOTH button and TrimSync does the rest.

If, for some reason, you want one drive to be at a different trim then push that drive’s trim button and it will move just as it always has. TrimSync will re-align the drive trim the next time you push the BOTH button. Just drive!

NOTE: Please specify when ordering if using Mercury Racing Engines.

This beautifully black anodized CNC crafted billet aluminum Fuel/Water separator filter mount is the perfect solution for modern Mercury outboard engines. This unit features 1/2"NPT inlet/outlet ports on either side for convenient fuel system plumbing and return. Sturdy one piece billet construction allows easy remote mounting of OEM filters and the popular aftermarket FST #692-33408 fuel/water separator filters. Hose and fittings not included.

• Ideal for Marine fuel/water Separator applications 
• CNC-machined from billet 6061-T6 aluminum 
• High-Flow Design 
• 11/16"-16 Thread 
• 1/2" NPT Inlet/Outlet ports 
• Accepts standard Mercury and Aftermarket RF51 Type #692-33408

This beautifully polished CNC crafted billet aluminum Fuel/Water separator filter mount is the perfect solution for modern Mercury outboard engines. This unit features 1/2"NPT inlet/outlet ports on either side for convenient fuel system plumbing and return. Sturdy one piece billet construction allows easy remote mounting of OEM filters and the popular aftermarket FST #692-33408 fuel/water separator filters. Hose and fittings not included.

• Ideal for Marine fuel/water Separator applications 
• CNC-machined from billet 6061-T6 aluminum 
• High-Flow Design 
• 11/16"-16 Thread 
• 1/2" NPT Inlet/Outlet ports 
• Accepts standard Mercury and Aftermarket RF51 Type #692-33408

This beautifully black anodized CNC crafted billet aluminum Fuel/Water separator filter kit is the perfect solution for modern Mercury outboard engines. This unit features 1/2"NPT inlet/outlet ports on either side for convenient fuel system plumbing and return. Sturdy one piece billet construction allows easy remote mounting of OEM filters and the popular aftermarket FST #692-33408 fuel/water separator filters. This kit includes a 692-33408 filter. Hose and fittings not included.

• Ideal for Marine fuel/water Separator applications 
• CNC-machined from billet 6061-T6 aluminum 
• High-Flow Design 
• 11/16"-16 Thread 
• 1/2" NPT Inlet/Outlet ports 
• Kit Includes FST Filter RF51 Type #692-33408

This beautifully polished CNC crafted billet aluminum Fuel/Water separator filter kit is the perfect solution for modern Mercury outboard engines. This unit features 1/2"NPT inlet/outlet ports on either side for convenient fuel system plumbing and return. Sturdy one piece billet construction allows easy remote mounting of OEM filters and the popular aftermarket FST #692-33408 fuel/water separator filters. This kit includes a 692-33408 filter. Hose and fittings not included.

• Ideal for Marine fuel/water Separator applications 
• CNC-machined from billet 6061-T6 aluminum 
• High-Flow Design 
• 11/16"-16 Thread 
• 1/2" NPT Inlet/Outlet ports 
• Kit Includes FST Filter RF51 Type #692-33408