525-840377T 1-1/4" Bravo XR Replacement Prop Shaft with Blue Carrier
|
|
527-400 1-1/4" Propshaft Conversion Kit
TIRED OF BREAKING 1” PROP SHAFTS? CHANGE TO THE BIG SHAFT FOR THE RIGHT PRICE! This conversion kit has all the parts that you will need to change your Bravo One, 1” prop shaft to a 1-1/4” prop shaft using you gear set! You don’t need to buy a new gear set! In most cases you can install this kit without removing the drive. This kit comes complete with conversion shaft & carrier kit.
Install Order:
- LOAD RING
- O-RING
- LOAD CARRIER
- LOCK TAB
- CARRIER NUT
|
|
221-2200 MayFair 4340 chromoly heat treated Slip-on u-joint extension shaft
for all Bravo drives with stand off boxes. This extension shaft slips over your stock Bravo spline output shaft , no need to remove your stock mercury spline output shaft for a quick and easy installation.
|
|
221-2000 This is a direct replacement for the flanged shaft (Mercury OEM's #939064, 93906A2, 8M0192274) inside the bell housing for a driveline setup with a Bravo drive. They are made from 4340 chromoly and actually weigh 0.2lbs heavier than the stock ones even though they are exactly the same dimensions. Made in the USA.
|
|
421-01-3257 2" Shorter Vertical Shaft for XR
Replaces 840979T1
Includes Bearing unlike factory Mercury part.
|
|
421-BRV-120 Direct Replacement One-Piece 17-4 Heavy Duty Down Shaft
|
|
421-01-3267 This shaft is cross drilled to create it's own internal central-fed lubrication system Better oiling promotes longer, more reliable duty cycle A must on high performance applications. This model is 2" Shorter.
|
|
421-01-3009 SC Prop Shaft, 1” - Only works with Gold Bearing SC Carrier.
|
|
|
|
|
|
|
|
421-01-3446 SCX, SCX4, SCXT, SCX4T Prop Shaft #6
|
|
421-01-3571 SCX, SCX4, SCXT, SCX4T Prop Shaft 1-7/16"
|
|
421-01-3562 SCXT, SCXT4 Vertical Shaft
17 tooth spline
|
|
421-01-3599 Upper Gear Shaft
Upgraded Upper Gear Shaft, this shaft is more forgiving thanthe stock harden shafts to allow less twist and breaks. Makesa great upgrade to any Bravo / XR / XZ drives.
|
|
602-92-421-05 Fits Yamaha outboard
1990 to current 76 degree 2 stroke (3.1 & 3.2 liter)
2002 to current 4 stroke 200-225hp
Standard rotation only Prop Shaft Fits Yamaha Prop Shaft 60V-45611-00-00
|
|
602-92-428-05 Fits Yamaha outboard
1990 to current 76 degree 2 stroke (3.1 & 3.2 liter)
2002 to current 4 stroke 200-225hp
Counter rotation only Prop Shaft Fits Yamaha Prop Shaft 69K-45611-00-00
|
|
602-92-405-05 Fits Yamaha outboard
V4 1984 to current
Standard rotation only Prop Shaft Fits Yamaha Prop Shaft 6E5-45611-01-00
|
|
602-92-418-05 Fits Yamaha outboard
2 stroke V6, 90 degree (2.6 liter), 2 stroke
2004 to current 150hp four stroke
Counter rotation only
|
|
602-92-305-05 Fits Johnson / Evinrude V4
Fits all 60 degree lowers using the 4 1/4" bullet diameter with two bolt carrier.
|
|
602-92-304-05 Fits Johnson / Evinrude V4
Crossflow and 90 degree looper
Fits all 4 1/4" diameter cases using the four bolt carrier.
|
|
