Push Button Switches - Replacement Parts and Accessories for Bluewater Switches

These are easily swappable buttons so you change functions easily on 19mm Bluewater Switches with Removable Buttons. There are over 100 Switch Function Icons to choose from.

• 100 + Label Options
• Laser Etched Logos available
  
• When using translucent buttons, labels are sold separately here.
• 0.576 O.D.

These are easily swappable buttons so you change functions easily on 22mm Bluewater Switches with Removable Buttons. There are over 100 Switch Function Icons to choose from.

• 100 + Label Options
• Laser Etched Logos available
  
• When using translucent buttons, labels are sold separately here.
• 0.695" O.D.

Function Labels for 19MM Push Button Switches 

Identifying the function of each push button switch is simple with the interchangeable 3M adhesive backed actuator PU Dome Backlit Labels. These labels are used when using translucent actuator buttons that allows the LEDs in the switch body to pass light through the label. The result is excellent visibility at night. There are over 100 Switch Function Icons to choose from.

• Over 100 Interchangeable 3M Adhesive Backed PU Dome Backlit Function Icon Labels to choose from.
• Light passes through clear part of label
• Used with 19mm switches with the translucent label option

Function Labels for 22MM Push Button Switches 

Identifying the function of each push button switch is simple with the interchangeable 3M adhesive backed actuator PU Dome Backlit Labels. These labels are used when using translucent actuator buttons that allows the LEDs in the switch body to pass light through the label. The result is excellent visibility at night. There are over 100 Switch Function Icons to choose from.

• Over 100 Interchangeable 3M Adhesive Backed PU Dome Backlit Function Icon Labels to choose from.
• Light passes through clear part of label
• Used with 22mm switches with the translucent label option

Deutsch Plug with 12" Wire lead for 19mm and 22mm Switches

These plugs are required if you buy switches without wire harnesses. This will allow you to splice together your boat's wiring harness to the switch.

Deutsch Plug with 36" Wire lead for 22mm Switches

These plugs are required if you buy switches without wire harnesses. This will allow you to splice together your boat's wiring harness to the switch.

Deutsch Plug ONLY for 19mm and 22mm Switches

These plugs are required if you buy switches without wire harnesses. This will allow you to build your own harnesses with wiring to your spec. These are the plug only. No wiring or connectors are included.

Stainless Steel Nut for 19mm and 22mm Switches

Replace the stock plastic nut with these stainless steel nuts for extra durability and longevity.

Replacement Plastic Nut for 19mm and 22mm Switches

Replacement for the stock plastic nut on Bluewater switches.

This tool allows you to easily install the nut on the back of your switch. Can be used with 1/4" drive ratchet.

These dummy plugs are used in the switch Deutsch connectors when you are not using one of the wire holes.

Small and Large Connector Pins for 19mm and 22mm Switches

These pins are required if you want to build your own harnesses. This will allow you to build your own harnesses with wiring to your spec. These are the connectors only. No wiring or plugs are included.

Daisy Chain Connectors for LED and Ground on Bluewater Switches 19mm and 22mm

(516-9050-0030) Blue is to daisy chain the LED wires on Bluewater Switches. (516-9050-0025) Black is to daisy chain the Ground wires on the Bluewater Switches. (516-9050-0035) Orange is to daisy chain the Power wires on the Bluewater Switches.

This marine grade electrical choke prevents voltage spikes – caused by noisy loads – from potentially damaging or preventing Bluewater push button switches (and other MOSFET driven push button switches) from entering In Rush protection mode.

It is highly recommended for switches that control constant pressure washdown pumps commonly used in freshwater systems. The electrical choke houses two coils which dampen the alternating transient signals coming from your noisy loads like washdown pumps; providing a clean flow of DC power to your switch.

To install the choke, simply butt connect the ends in series with the output of the switch; Preferably as close to the pump as possible, but can be done anywhere between the switch output and the load device in the positive conductor.

INTENDED SWITCH USAGE:

• Wash down
• Raw Water
• Fresh Water

This tool allows you to crimp Deutsch connector pins to 14-24 AWG Wire

Relays and Bi-Stable relays such as a Remote Battery Switch or Charge Control Relay exhibit similar behavior as above only have low amperage requirements in some cases less than 250 milliamps not even 1 Ampere required by the device. But the bounce or magnitude of the resulting EFT (electrical fast transient) when being switched can be excessively high.

LED Lights, not all but some have internal power controllers. Others have basic switching drivers and have high noise or EFT (electrical fast transients) present while operating and when being switched on of a high magnitude and are expected; some are harsher than others. Could be very small LED’s or large spreader LED lights; either could have similar negative electronic behavioral effects. Again, even ones that consume less than 1 amp could be a significant contributor to faults.

None of the above has to do with the quality of a particular manufacturer it simply is an inherent characteristic of the referenced devices. However, there is a simple solution. Again, typically there is one switch or device when being turned on or operating that is attributing to In-Rush fault indication and easily identified. Typically, when being turned on or off however in the LED example it may not occur until after a long period of operation when voltage is depleted or temperature increases. In both examples B & C a 16V 1000uF electrolytic capacitor Part ID: 1406-000-001 can be installed across the Line V+ and Ground near the switch to correct the issue creating the fault.