Cyclone Exhaust Systems - Big Block Chevy

Cyclone "Shorty Header"
Your Price:
$3,999.99

Cyclone "Shorty Headers" for Big Block Chevy

620-32001

Cyclone "Shorty Headers"
Replacement Header For Gil Marine, Mercury Hi-Performance & Rex Power Torque Manifolds
Fully Polished Finish

Do your performance manifolds look like these but your stainless steel tailpipes still look like jewelry?  This is a common problem with a number of aftermarket high performance exhaust manifolds, the solution is to replace them with the Cyclone "Shorty"! An all 316L stainless steel header designed as a direct bolt-on replacement for your cast aluminum manifolds. 

By retaining your existing stainless steel tailpipe or riser, you can remove your existing manifolds and simply slide the new "Shorty Header" into place and connect your existing tailpipes.  These units are currently available to replace Mercury Hi-Performance, Gil Marine, and Rex Marine Power Torque manifolds.  Each header is manufactured to the highest quality standard using 100% 316L stainless steel construction, laser machined flanges for a perfect gasket seal, and exhaust tubes that are B.T.B. bent to exact tolerances every time.  A fully welded computer designed water inlet manifold assures equal water flow to each individual exhaust tube.  These headers are completely annealed to maximize durability while preventing corrosion.  CAD-5 technology was used to develop the staggered length exhaust tube runners which provide for broader low and mid range torque, while yielding incredible peak power. This kit comes complete with all necessary bolts and gaskets to attach to your engine. Riser gaskets are not included, and you may need up to 4 gaskets depending on application. See related parts.


Cyclone H/P Air Sound-Select Header System For GM Big Block Bravo
Your Price:
$6,999.99

Cyclone H/P Air Sound-Select Header System For GM Big Block Bravo

620-32050

Cyclone H/P Air Sound-Select Header System For GM Big Block Bravo - Fully Polished

At last, a true high performance header with an air activated diverter built-in This gorgeous, one-piece-design tailpipe is the perfect choice for the power hungry boater who is seeking to reduce noise This system is sold complete with all necessary hose fittings, pump, gaskets, and bolts. Oil filter bracket, shift control bracket, and ECU bracket not included.

If you are one of thousands of performance boaters seeking the power and styling from stainless steel tubular headers then you're looking at the leader in exhaust technology.  These "Cyclone" header systems share 100% 316L stainless steel construction.  All appropriate flanges are laser cut and CNC machined for a perfect gasket seal Each individual exhaust tube is bent to precise, exact tolerances every time.  A computer designed fully welded water inlet manifold provides equal water distribution to each exhaust runner tube.  While each set of headers goes through a 1900 degree annealing process that multiplies the durability factor of the header many times over while providing added protection against corrosion.  But the heart of these systems lies in the ability to generate loads of additional power. By using CAD-5 Technology to develop a unique staggered tube runner length, these systems are capable of maximizing the broadest low end and midrange torque, all the while yielding incredible peak power gains.  These systems are available in many configurations to fit every boaters needs.  Rest assured when you lay down your hard earned money because the system comes complete with all necessary mounting bolts and gaskets making installation a snap.

Additional Information:


Cyclone Header System For GM Big Block Standard Dimension Bravo
Your Price:
$5,899.99

Cyclone Header System For GM Big Block Standard Dimension Bravo

620-32005

Cyclone Water Jacketed Header System For GM Big Block Standard Dimension Bravo - Fully Polished

This Cyclone wet exhaust series header works perfectly on both stock and modified performance applications This header mixes engine cooling water with the exhaust near the end of the tailpipe That allows you to use a 4" rubber hose connection to attach your transom mounted exhaust tips This is the perfect replacement for your factory exhaust system. Oil filter bracket, shift control bracket, and ECU bracket not included. Gaskets and bolts are included.

If you are one of thousands of performance boaters seeking the power and styling from stainless steel tubular headers then you're looking at the leader in exhaust technology These "Cyclone" header systems share 100% 316L stainless steel construction. All appropriate flanges are laser cut and CNC machined for a perfect gasket seal. Each individual exhaust tube is bent to precise, exact tolerances every time. A computer designed fully welded water inlet manifold provides equal water distribution to each exhaust runner tube. While each set of headers goes through a 1900 degree annealing process that multiplies the durability factor of the header many times over while providing added protection against corrosion. But the heart of these systems lies in the ability to generate loads of additional power. By using CAD-5 Technology to develop a unique staggered tube runner length, these systems are capable of maximizing the broadest low end and midrange torque, all the while yielding incredible peak power gains. These systems are available in many configurations to fit every boaters needs. Rest assured when you lay down your hard earned money because the system comes complete with all necessary mounting bolts and gaskets making installation a snap.

Additional Information:


Cyclone Header System For GM Big Block Standard Dimension TRS
Your Price:
$5,899.99

Cyclone Header System For GM Big Block Standard Dimension TRS

620-32010

Cyclone Water Jacketed Header System For GM Big Block Standard Dimension TRS - Fully Polished

This Cyclone wet exhaust series header works perfectly on both stock and modified performance applications This header mixes engine cooling water with the exhaust near the end of the tailpipe That allows you to use a 4" rubber hose connection to attach your transom mounted exhaust tips This is the perfect replacement for your factory exhaust system. Oil filter bracket, shift control bracket, and ECU bracket not included. Gaskets and bolts are included.

If you are one of thousands of performance boaters seeking the power and styling from stainless steel tubular headers then you're looking at the leader in exhaust technology These "Cyclone" header systems share 100% 316L stainless steel construction. All appropriate flanges are laser cut and CNC machined for a perfect gasket seal. Each individual exhaust tube is bent to precise, exact tolerances every time. A computer designed fully welded water inlet manifold provides equal water distribution to each exhaust runner tube. While each set of headers goes through a 1900 degree annealing process that multiplies the durability factor of the header many times over while providing added protection against corrosion. But the heart of these systems lies in the ability to generate loads of additional power. By using CAD-5 Technology to develop a unique staggered tube runner length, these systems are capable of maximizing the broadest low end and midrange torque, all the while yielding incredible peak power gains. These systems are available in many configurations to fit every boaters needs. Rest assured when you lay down your hard earned money because the system comes complete with all necessary mounting bolts and gaskets making installation a snap.

Additional Information:


Cyclone Header System For GM Big Block With Custom Dimension Tailpipes
Your Price:
$0.00

CALL TO ORDER

Cyclone Header System For GM Big Block With Custom Dimension Tailpipes

620-32020

Cyclone Water Jacketed Header System For GM Big Block With Custom Dimension Tailpipes - Fully Polished

This Cyclone wet exhaust series header works perfectly on both stock and modified performance applications This header mixes engine cooling water with the exhaust near the end of the tailpipe That allows you to use a 4" rubber hose connection to attach your transom mounted exhaust tips This is the perfect replacement for your factory exhaust system. Oil filter bracket, shift control bracket, and ECU bracket not included. Gaskets and bolts are included.

If you are one of thousands of performance boaters seeking the power and styling from stainless steel tubular headers then you're looking at the leader in exhaust technology These "Cyclone" header systems share 100% 316L stainless steel construction. All appropriate flanges are laser cut and CNC machined for a perfect gasket seal. Each individual exhaust tube is bent to precise, exact tolerances every time. A computer designed fully welded water inlet manifold provides equal water distribution to each exhaust runner tube. While each set of headers goes through a 1900 degree annealing process that multiplies the durability factor of the header many times over while providing added protection against corrosion. But the heart of these systems lies in the ability to generate loads of additional power. By using CAD-5 Technology to develop a unique staggered tube runner length, these systems are capable of maximizing the broadest low end and midrange torque, all the while yielding incredible peak power gains. These systems are available in many configurations to fit every boaters needs. Rest assured when you lay down your hard earned money because the system comes complete with all necessary mounting bolts and gaskets making installation a snap.

Additional Information:


Cyclone Header System For GM Big Block Standard Dimension Bravo
Your Price:
$6,599.99

Cyclone Header System For Mercury 525 / 600 / 700 Applications

620-32100

Cyclone Header System For Mercury 525 / 600 / 700 Applications, Standard Dimension Bravo - Fully Polished

This Cyclone wet exhaust series header works perfectly on both stock and modified performance applications This header mixes engine cooling water with the exhaust near the end of the tailpipe That allows you to use a 4" rubber hose connection to attach your transom mounted exhaust tips This is the perfect replacement for your factory exhaust system. Oil filter bracket, shift control bracket, and ECU bracket not included. Gaskets and bolts are included.

If you are one of thousands of performance boaters seeking the power and styling from stainless steel tubular headers then you're looking at the leader in exhaust technology These "Cyclone" header systems share 100% 316L stainless steel construction. All appropriate flanges are laser cut and CNC machined for a perfect gasket seal. Each individual exhaust tube is bent to precise, exact tolerances every time. A computer designed fully welded water inlet manifold provides equal water distribution to each exhaust runner tube. While each set of headers goes through a 1900 degree annealing process that multiplies the durability factor of the header many times over while providing added protection against corrosion. But the heart of these systems lies in the ability to generate loads of additional power. By using CAD-5 Technology to develop a unique staggered tube runner length, these systems are capable of maximizing the broadest low end and midrange torque, all the while yielding incredible peak power gains. These systems are available in many configurations to fit every boaters needs. Rest assured when you lay down your hard earned money because the system comes complete with all necessary mounting bolts and gaskets making installation a snap.

Additional Information:


Cyclone High Performance Bravo Exhaust System
Your Price:
$5,999.99

Cyclone High Performance Bravo Exhaust System

620-32025

Cyclone High Performance Bravo Exhaust System

The Cyclone HP Bravo exhaust system is a water jacketed wet style exhaust header. This system is an excellent choice for both stock and modified performance applications. The tailpipe design provides a steep angle and high centerline making the cooling water discharge resistant to water reversion, correcting what was a common problem in many HP 500 applications. This is the perfect replacement exhaust system for the HP500 style engine packages. This header mixes the engine cooling water with the exhaust near the end of the tailpipe which is then connected to a 4" rubber hose exhaust that connects to the transom mounted exhaust tips. Gaskets, and bolts are all included.


Cyclone Low Exit System Header System For GM Big Block Bravo
Your Price:
$5,799.99

Cyclone Low Exit System Header System For GM Big Block Bravo

620-32060

Cyclone Low Exit System Header System For GM Big Block Bravo - Fully Polished

This Hardin Marine Cyclone system is designed around an application where an incorporated swim platform creates the need to exit the exhaust in a lower than standard location Through the use of a floating elbow positioning of the exit is somewhat maneuverable, these systems are perfect for limited access applications. Oil filter bracket, shift control bracket, and ECU bracket not included. Gaskets and bolts are included.

If you are one of thousands of performance boaters seeking the power and styling from stainless steel tubular headers then you're looking at the leader in exhaust technology. These "Cyclone" header systems share 100% 316L stainless steel construction. All appropriate flanges are laser cut and CNC machined for a perfect gasket seal. Each individual exhaust tube is bent to precise, exact tolerances every time. A computer designed fully welded water inlet manifold provides equal water distribution to each exhaust runner tube. While each set of headers goes through a 1900 degree annealing process that multiplies the durability factor of the header many times over while providing added protection against corrosion. But the heart of these systems lies in the ability to generate loads of additional power. By using CAD-5 Technology to develop a unique staggered tube runner length, these systems are capable of maximizing the broadest low end and midrange torque, all the while yielding incredible peak power gains. These systems are available in many configurations to fit every boaters needs. Rest assured when you lay down your hard earned money because the system comes complete with all necessary mounting bolts and gaskets making installation a snap.

Additional Information:


Cyclone Sound-Selectâ„¢ Header System For GM Big Block Bravo
Your Price:
$5,999.99

Cyclone Sound-Select Header System For GM Big Block Bravo

620-32040

Cyclone Sound-Selectâ„¢ Header System For GM Big Block Bravo - Fully Polished

This is one of the easiest horsepower enhancing exhaustsystems available today! For boats currently using a switch-able exhaust diverter system, this was designed to replace MerCruiser® big block silent choice systems. This system will save up to 80 lbs compared to cast iron ones. Oil filter bracket, shift control bracket, and ECU brackets sold separately. Gaskets, and bolts are included.

If you are one of thousands of performance boaters seeking the power and styling from stainless steel tubular headers then you're looking at the leader in exhaust technology. These "Cyclone" header systems share 100% 316L stainless steel construction. All appropriate flanges are laser cut and CNC machined for a perfect gasket seal Each individual exhaust tube is bent to precise, exact tolerances every time. A computer designed fully welded water inlet manifold provides equal water distribution to each exhaust runner tube. While each set of headers goes through a 1900 degree annealing process that multiplies the durability factor of the header many times over while providing added protection against corrosion. But the heart of these systems lies in the ability to generate loads of additional power. By using CAD-5 Technology to develop a unique staggered tube runner length, these systems are capable of maximizing the broadest low end and midrange torque, all the while yielding incredible peak power gains. These systems are available in many configurations to fit every boaters needs. Rest assured when you lay down your hard earned money because the system comes complete with all necessary mounting bolts and gaskets making installation a snap.

Additional Information:


Replacement Cyclone Series Big Block Chevy Manifold Install Kit
Your Price:
$69.99

Replacement Cyclone Series Big Block Chevy Manifold Install Kit

620-32515

This kit contains the fittings and bolts to install a pair of manifolds on a big block Chevy Cyclone exhaust system.


Replacement Cyclone Series Big Block Chevy Riser Install Kit
Your Price:
$79.95

Replacement Cyclone Series Big Block Chevy Riser Install Kit

620-32520

This kit contains the fittings, gaskets and bolts to install a single riser on a big block Chevy Cyclone exhaust system.