Components & Accessories - Intercoolers

TBS Replacement Intercooler Core w/Gaskets
Your Price:
$1,314.50

TBS Replacement Intercooler Core w/Gaskets

129-5055

TBS Replacement Intercooler Core w/Gaskets (Aluminum). Comes with four gaskets and two o-rings.


Replacement Stainless Steel Mercury 1075 Intercooler Fitting #22-8M0032578
Your Price:
$145.99

Whipple Intercooler Fitting (2x) -12 AN Female to -12 AN Male

410-3003

  • Made from 316L Stainless Steel
  • (2x) -12 AN Female x -12 AN Male
  • For Whipple Interrcoolers
  • WILL NOT FIT WITH MERCURY 525 HEAT EXCHANGER!

144 B&M Intercooler
Your Price:
$1,359.99

144 B&M Intercooler

128-144

144 B&M Intercooler

144 SuperChiller Intercooler, Holley/B&MIf you're looking for a cost effective method of increasing your supercharged engine's output and improving reliability, install a SuperChiller Intercooler. Bolt-on 75 to 150 horsepower. The SuperChiller Intercooler dramatically reduces the air temperature of the intake charge, thereby increasing air density to the combustion chamber. A cooler, denser air/fuel mixture takes up less space inside each cylinder, allowing the mixture to provide an increased intake charge without the risk of detonation. SuperChiller Intercoolers are available for 6:71 - 14:71, Holley/B&M, Weiand and MerCruiser supercharger systems.


250 B&M Intercooler
Your Price:
$875.99

250 B&M, 420, 8/71 Intercooler Core

128-250C

250 B&M, 420, 8/71 Intercooler Core ONLY

250 B&M, 420, 8/71 SuperChiller Intercooler core. This is a replacement core only! The image shows fully assembled intercooler that this core fits!


250 TBS Intercooler
Your Price:
$1,899.99

250 TBS Intercooler

128-250-TBS

250 TBS Intercooler

250TBS SuperChiller Intercooler.If you're looking for a cost effective method of increasing your supercharged engine's output and improving reliability, install a SuperChiller Intercooler. Bolt-on 75 to 150 horsepower. The SuperChiller Intercooler dramatically reduces the air temperature of the intake charge, thereby increasing air density to the combustion chamber. A cooler, denser air/fuel mixture takes up less space inside each cylinder, allowing the mixture to provide an increased intake charge without the risk of detonation.Installation studs and gaskets included.Features hard anodized end caps with 1/2" female NPT fittings. End caps available blank or with Superchiller logo, please specify. Superchiller housing is 4" thick. Anodized aluminum core features 9 water tubes and 24 fins per inch. Not recommended for continuous salt water use. Always flush intercoolers after salt water use.


256 Weiand Intercooler
Your Price:
$1,960.00

256 Weiand Intercooler

128-256

256 Weiand Intercooler

256 SuperChiller Intercooler, Holley/Weiand. If you're looking for a cost effective method of increasing your supercharged engine's output and improving reliability, install a SuperChiller Intercooler. Bolt-on 75 to 150 horsepower. The SuperChiller Intercooler dramatically reduces the air temperature of the intake charge, thereby increasing air density to the combustion chamber. A cooler, denser air/fuel mixture takes up less space inside each cylinder, allowing the mixture to provide an increased intake charge without the risk of detonation.Installation studs and gaskets included.Features hard anodized end caps with 1/2" female NPT fittings. End caps available blank or with Superchiller logo, please specify. Superchiller housing is 4" thick. Anodized aluminum core features 9 water tubes and 24 fins per inch. Not recommended for continuous salt water use. Always flush intercoolers after salt water use.


671/14-71 Polished Intercooler
Your Price:
$2,475.00

671/14-71 Polished Intercooler

129-5050

671/14-71 Polished Intercooler

If you are seeking to purchase a new intercooler for not only its added horsepower but its great aggressive appearance and only the very best will do Look no further! Since the Blower Shop has introduced its all new "Billet" intercooler that's CNC machined from one massive stock of 6061-T6 aluminum comes this show piece but they didn't stop there they used the latest in aircraft technology intercooling to develop one of the best performing intercoolers anywhere at any price But that's just it, they did all of this and yet still made it affordable and a great value. Includes mounting hardware and 2 base gaskets.


671-1471 Intercooler
Your Price:
$1,899.99

This Part has options, please click the button below to order.

671-1471 Intercooler

128-871

671-1471 Intercooler

6-71 through 14-71 SuperChiller Intercooler. If you're looking for a cost effective method of increasing your supercharged engine's output and improving reliability, install a SuperChiller Intercooler. Bolt-on 75 to 150 horsepower. The SuperChiller Intercooler dramatically reduces the air temperature of the intake charge, thereby increasing air density to the combustion chamber. A cooler, denser air/fuel mixture takes up less space inside each cylinder, allowing the mixture to provide an increased intake charge without the risk of detonation.will not fit "Weiand" Intakes Installation studs and gaskets included.Features hard anodized end caps with 1/2" female NPT fittings. End caps available blank or with Superchiller logo, please specify. Superchiller housing is 4" thick. Anodized aluminum core features 9 water tubes and 24 fins per inch. Not recommended for continuous salt water use. will not fit "Weiand" Intakes. Always flush intercoolers after salt water use.


Whipple Intercooler Big Block Chevy Standard Deck 671/871 Hard Anodized
Starting From:
$6,265.99

This Part has options, please click the button below to order.

Whipple High Performance Intercooler for 575 SCi

MULTIPLE PART NUMBER OPTIONS. CLICK PART OPTIONS FOR MORE INFO ->

Whipple High Performance Intercooler for 575 SCi

MORE RELIABLE POWER FROM YOUR MERCURY 575SCI
The EFI and supercharging experts at Whipple have developed a low profile intercooler package for the Mercury Racing 575SCI engine. The package includes a new intake manifold, Whipple Cooler cupronickel intercooler core, supercharger pulley and the hardware needed for installation.

Whipple also offers a new computer calibration with this package to compensate for the cooler air and increased boost level. Power levels increase almost 100HP and 125 Lbs. of torque while maintaining superior reliability on pump gas. All of this in one package, yet it only requires 1.625” of additional height.

LOW PROFILE WHIPPLE COOLER
Whipple Superchargers new low profile intercooler is the most durable and most efficient intercooler on the market today. While others use aluminum intercooler cores, Whipple is the only company that utilizes the patent technology of the cupronickel intercooler, a Whipple exclusive. Whipple’s cupronickel, pronounced koo•pro•nik•el, is a space age technology that utilizes a unique blend of pure copper air fins for increased thermal efficiency over aluminum and cupronickel water passages for maximum corrosion resistance. Some utilize “chromacoat” or anodized cores, which will still corrode over time, only cupronickel will last in the brackish lake waters and ocean salt water.

PERFORMANCE
The Whipple Coolers are by far the most efficient core designs on the market and all the latest technology was used during design. The cupronickel core was designed with an offset fin design at an incredible count of 24 fins per inch on the air side which is like running 48fpi. What does this mean? Almost double the surface area of some of the other cooler designs to maximize thermal reduction like no other cooler. The core features an integrated ¾” NPT and 3-pass design to allow the entire core to be utilized under all water flow conditions, giving you the maximum amount of cooling. No other cooler can match this performance.

DURABILITY
The Whipple Coolers heavy-duty construction and robust material make it the most durable intercooler on the market. This unique design utilizes a rugged bar-plate design vs. the standard extruded tube. The bar-plate design can endure virtually all applications while the tig-welded construction will hold under all conditions. Aluminum cores can also melt under extreme applications but cupronickel’s melting point is almost 800 degrees higher than that of aluminum.

PCM RECALIBRATION
Inlcuded in the kit, Whipple reflashes our original ECM for proper fuel and spark control to maximize power.


Whipple Intercooler Big Block Chevy B & M / Holley 250/420 Satin
Your Price:
$4,935.99

CALL TO ORDER

Whipple Intercooler Big Block Chevy B & M / Holley 250/420 Satin

485-WC9030N

Whipple Supercharger Intercooler - Big Block Chevy B & M / Holley 250/420 Satin

Whipple Superchargers continuing strive for excellence and technological advancements have now developed a new line of incredibly efficient line of low profile intercoolers that are truly state-of-the-art The "Whipple Cooler: intercoolers were designed and built by Garrett® specifically for Whipple Superchargers Garrett® is one of the world's largest and most technologically advanced intercooler manufacturers The "Whipple Cooler" intercoolers feature Garrett's® new space age technology that combines the virtually indestructible material know as Cupronickel with the very effective metal, copper The Cupronickel is used for all the water tanks and passageways while the air fins are made of pure cooper for incredible cooling efficiency Cupronickel will never corrode or biofoul such as aluminum-type coolers as well as having a much higher temperature range (than aluminum) for extreme situations. The copper fins offer almost twice the cooling efficiency over the traditional aluminum-type cores, which allows for a much cooler air charger. The substantial temperature decrease can offer you far more achievable power and at the same time, greater durability and reliability.


Whipple Intercooler Big Block Chevy Standard Deck 671/871 Hard Anodized
Your Price:
$4,840.99

CALL TO ORDER

Whipple Intercooler Big Block Chevy Standard Deck 671/871 Hard Anodized

485-WC9010B

Whipple Supercharger Intercooler - Big Block Chevy Standard Deck 671/871 Hard Anodized

Whipple Superchargers continuing strive for excellence and technological advancements have now developed a new line of incredibly efficient line of low profile intercoolers that are truly state-of-the-art The "Whipple Cooler: intercoolers were designed and built by Garrett® specifically for Whipple Superchargers Garrett® is one of the world's largest and most technologically advanced intercooler manufacturers The "Whipple Cooler" intercoolers feature Garrett's® new space age technology that combines the virtually indestructible material know as Cupronickel with the very effective metal, copper The Cupronickel is used for all the water tanks and passageways while the air fins are made of pure cooper for incredible cooling efficiency Cupronickel will never corrode or biofoul such as aluminum-type coolers as well as having a much higher temperature range (than aluminum) for extreme situations. The copper fins offer almost twice the cooling efficiency over the traditional aluminum-type cores, which allows for a much cooler air charger. The substantial temperature decrease can offer you far more achievable power and at the same time, greater durability and reliability.


Whipple Intercooler Big Block Chevy Standard Deck 671/871 Polished
Your Price:
$5,220.99

CALL TO ORDER

Whipple Intercooler Big Block Chevy Standard Deck 671/871 Polished

485-WC9010P

Whipple Supercharger Intercooler - Big Block Chevy Standard Deck 671/871 Polished

Whipple Superchargers continuing strive for excellence and technological advancements have now developed a new line of incredibly efficient line of low profile intercoolers that are truly state-of-the-art The "Whipple Cooler: intercoolers were designed and built by Garrett® specifically for Whipple Superchargers Garrett® is one of the world's largest and most technologically advanced intercooler manufacturers The "Whipple Cooler" intercoolers feature Garrett's® new space age technology that combines the virtually indestructible material know as Cupronickel with the very effective metal, copper The Cupronickel is used for all the water tanks and passageways while the air fins are made of pure cooper for incredible cooling efficiency Cupronickel will never corrode or biofoul such as aluminum-type coolers as well as having a much higher temperature range (than aluminum) for extreme situations. The copper fins offer almost twice the cooling efficiency over the traditional aluminum-type cores, which allows for a much cooler air charger. The substantial temperature decrease can offer you far more achievable power and at the same time, greater durability and reliability.


Whipple Intercooler Big Block Chevy Standard Deck 671/871 Satin Finish
Your Price:
$4,745.99

CALL TO ORDER

Whipple Intercooler Big Block Chevy Standard Deck 671/871 Satin Finish

485-WC9010N

Whipple Supercharger Intercooler - Big Block Chevy Standard Deck 671/871 Satin Finish

Whipple Superchargers continuing strive for excellence and technological advancements have now developed a new line of incredibly efficient line of low profile intercoolers that are truly state-of-the-art The "Whipple Cooler: intercoolers were designed and built by Garrett® specifically for Whipple Superchargers Garrett® is one of the world's largest and most technologically advanced intercooler manufacturers The "Whipple Cooler" intercoolers feature Garrett's® new space age technology that combines the virtually indestructible material know as Cupronickel with the very effective metal, copper The Cupronickel is used for all the water tanks and passageways while the air fins are made of pure cooper for incredible cooling efficiency Cupronickel will never corrode or biofoul such as aluminum-type coolers as well as having a much higher temperature range (than aluminum) for extreme situations. The copper fins offer almost twice the cooling efficiency over the traditional aluminum-type cores, which allows for a much cooler air charger. The substantial temperature decrease can offer you far more achievable power and at the same time, greater durability and reliability.


Whipple Intercooler Big Block Chevy Tall Deck 671/871 Polished
Your Price:
$5,220.99

CALL TO ORDER

Whipple Intercooler Big Block Chevy Tall Deck 671/871 Polished

485-WC9012P

Whipple Supercharger Intercooler - Big Block Chevy Tall Deck 671/871 Polished

Whipple Superchargers continuing strive for excellence and technological advancements have now developed a new line of incredibly efficient line of low profile intercoolers that are truly state-of-the-art The "Whipple Cooler: intercoolers were designed and built by Garrett® specifically for Whipple Superchargers Garrett® is one of the world's largest and most technologically advanced intercooler manufacturers The "Whipple Cooler" intercoolers feature Garrett's® new space age technology that combines the virtually indestructible material know as Cupronickel with the very effective metal, copper The Cupronickel is used for all the water tanks and passageways while the air fins are made of pure cooper for incredible cooling efficiency Cupronickel will never corrode or biofoul such as aluminum-type coolers as well as having a much higher temperature range (than aluminum) for extreme situations. The copper fins offer almost twice the cooling efficiency over the traditional aluminum-type cores, which allows for a much cooler air charger. The substantial temperature decrease can offer you far more achievable power and at the same time, greater durability and reliability.


Mercury Racing 700 Intercooler Hi-Flow Fitting Kit
Your Price:
$359.99

Mercury Racing 700 Intercooler Hi-Flow Fitting Kit

625-4614

Mercury Racing 700 Intercooler Hi-Flow Fitting Kit

This fitting kit replaces the stock fittings with larger higher flow fittings allowing better cooling performance. Fittings are -10 AN.


Replacement Stainless Steel Mercury 1075 Intercooler Fitting #22-8M0032578
Your Price:
$149.99

Whipple Intercooler Fitting (2x) -12 AN Female to -16 AN Male

410-3001

  • Made from 316L Stainless Steel
  • (2x) -12 AN Female x -16 AN Male
  • For Whipple Interrcoolers

Replacement Stainless Steel Mercury 1075 Intercooler Fitting #22-8M0032578
Your Price:
$134.99

Whipple Log Fitting (2x) -12 AN Female to -16 AN Male

410-3002

  • Made from 316L Stainless Steel
  • (2x) -12 AN Female x -16 AN Male
  • For Whipple Logs

Intercooler Seal Kit for Superchiller and KE Intercoolers
Your Price:
$31.99

Intercooler Seal Kit for Superchiller and KE Intercoolers

128-10001

Intercooler Seal Kit

Supercharger gaskets are used in assembly and installation of a supercharger, as well as the GMC supercharger style cases. Installation screws and o-rings included. Fits Superchiller and KE intercoolers only.