Trim Controls, Accessories and Hardware - Hoses

60 inch trim hose with one 90 degree and one straight hose end. Fitting size is -3 inverted flare 3/8"-24 thread.

Hydraulic Stainless Steel Trim Hose Assemblies with 90 / 90 Degree Ends

These are made from 100% 316 stainless steel fittings and high performance rubber hose for the hydraulic trim pumps used on trim tabs, outdrives and hatch rams. Available in lengths from 1 to 50 feet. Fitting size is -3 inverted flare 3/8"-24 thread. Priced each. These hoses are made to order and are non returnable!

Hydraulic Trim Hose Assemblies with Straight / 90 Degree Ends

These are 100% 316 stainless steel fittings and high performance rubber hoses for the hydraulic trim pumps used on trim tabs, outdrives and hatch rams. Available in lengths from 1 to 50 feet. Fitting size is -3 inverted flare 3/8"-24 thread. Priced each. These hoses are made to order and are non returnable.

Hydraulic Trim Hose Assemblies with Straight / Straight Degree Ends

These are 100% 316 stainless steel fittings and high performance rubber hoses for the hydraulic trim pumps used on trim tabs, outdrives and hatch rams. Available in lengths from 1 to 50 feet. Fitting size is -3 inverted flare 3/8"-24 thread. Priced each.

Outdrive Trim Hoses - Long (Priced per Inch)

This is a longer custom replacement trim pump connector hose for use when you want to relocate your outdrive trim pump and the stock hoses come up short. They are made from stainless  fittings and high performance stainless braided hose.

• Replaces Mercruiser # 32-861127 and 32-861128
• Will fit R/MR/Alpha I/II and BravoI/II/III
• Trim pump to connector block
• Stainless End to Connector Block: 7/16-24 IF
• Stainless End to Trim Pump: 3/8-24 IF
• Sold per Inch
• Custom Made per Order - MINIMUM SIZE is 60"
• NO RETURNS
  

Outdrive Trim Hoses - Long/Short Pair (Priced per Inch)

This is a longer replacement trim pump connector hose kit for use when you want to relocate your outdrive trim pump and the stock hoses come up short. They are  made from stainless  fittings and high performance stainless braided hose.

• Replaces Mercruiser # 32-861127 and 32-861128
• Will fit R/MR/Alpha I/II and BravoI/II/III
• Trim pump to connector block
• Sold per Inch
• Custom Made per Order - MINIMUM SIZE is 60"
• NO RETURNS
• If you need more than one pair of custom hoses, please give us a call to order them so we can make sure everything is built correctly.

Outdrive Trim Hoses - Short Radius (Priced per Inch)

This is a longer custom replacement trim pump connector hose for use when you want to relocate your outdrive trim pump and the stock hoses come up short. They are made from stainless fittings and high performance stainless braided hose.

• Replaces Mercruiser # 32-861127
• Will fit R/MR/Alpha I/II and BravoI/II/III
• Trim pump to connector block
• Stainless End to Connector Block: 7/16-24 IF
• Stainless End to Trim Pump: 3/8-24 IF
• Sold per Inch
• Custom Made per Order - MINIMUM SIZE is 60"
• NO RETURNS
  

Braided Hoses to be used with Livorsi Trim Tab Kits. Four Hoses are needed per kit.