602-GEN-I-1-47-COMP Replaces most Mercruiser Sterndrives 228 HP and up from 1974-1990.
with a 9-9/16 new style input yoke.
Does not include Complete Install Kit or Anode Kit.
Up to 300 HP (SEI does not warranty applications over 300 HP)
Replaces Mercruiser Sterndrive 225-S 1974
Replaces Mercruiser Sterndrive 233 1975-1977
Replaces Mercruiser Sterndrive 250 1977
Replaces Mercruiser Sterndrive 260 1978-1982
Replaces Mercruiser Sterndrive 898/228 1977-1982
Replaces Mercruiser Sterndrive R/MR/Alpha One 1983-1990
Typical Mercruiser Sterndrive engine liter applications from 1983-1990 include 5.7L, 5.0L (4 barrel carb)
Typical Mercruiser Sterndrive engine cubic inch applications from 1983-1990 include 350, 305 (4 barrel carb)
Typical Mercruiser Sterndrive engine horsepower applications include 260, 230, 228
|
|
602-GEN-I-1-62-COMP Replaces most Mercruiser Sterndrives 205 HP from 1983-1990.
Comes with a 9-9/16 new style input yoke.
Does not include Complete Install Kit or Anode Kit.
Up to 300 HP (SEI does not warranty applications over 300 HP)
Replaces Mercruiser Sterndrive R/MR/Alpha One 1983-1990
Typical Mercruiser Sterndrive engine liter applications from 1983-1990 include 5.0L (2 barrel carb)
Typical Mercruiser Sterndrive engine cubic inch applications from 1983-1990 include 305 (2 barrel carb)
Typical Mercruiser Sterndrive engine horsepower applications include 205 HP
|
|
602-GEN-I-1-81-COMP Replaces most Mercruiser Sterndrives 165-205 HP and up from 1976-1990.
Typically used on V6 engines and the large 3.7L Mercruiser inline 4 cylinder engine.
Comes with a 9-9/16 new style input yoke.
Does not include Complete Install Kit or Anode Kit.
Up to 300 HP (SEI does not warranty applications over 300 HP)
Replaces Mercruiser Sterndrive 470 1983-1989
Replaces Mercruiser Sterndrive 485 1983-1989
Replaces Mercruiser Sterndrive 4.3L V6 262 C.I. 1983-1990
Replaces Mercruiser Sterndrive 3.8L V6 229 C.I. 1983-1984
Replaces Mercruiser Sterndrive R/MR/Alpha One 1983-1990
Typical Mercruiser Sterndrive engine liter applications from 1983-1990 include 3.7L inline 4, 4.3L V6
Typical Mercruiser Sterndrive engine cubic inch applications from 1983-1990 include 224, 262 CI
Typical Mercruiser Sterndrive engine horsepower applications include 165,170, 175, 180, 185,190 and 205
|
|
602-GEN-I-1-94-COMP Comes with a 9-9/16 new style input yoke.
Does not include Complete Install Kit or Anode Kit.
|
|
602-90-106-02 Replaces R, MR, Alpha One lowers from 1972-1990
Has 13 Spline Driveshaft
The tooth count is 13-21
Up to 300 HP
|
|
602-90-106-01D The 1.47 ratio also replaces the 1.5 ratio
Comes with a 9-9/16 new style input yoke. Up to 300 HP
|
|
602-90-106-01c The 1.62 ratio also replaces the 1.65 ratio
Comes with a 9-9/16 new style input yoke.
|
|
602-90-104-01C The 1.62 ratio also replaces the 1.65 ratio
Comes with a 8-1/8 input yoke. This drive is generally used on older inline 6 and 4 cylinder engines.
|
|
602-90-106-01B The 1.81 ratio also replaces the 1.84 ratio
Comes with a 9-9/16 new style input yoke.
|
|
602-90-104-01B The 1.81 ratio also replaces the 1.84 ratio
Comes with a 8-1/8 input yoke.
This drive is generally used on older inline 6 and 4 cylinder engines.
|
|
602-90-106-01A The 1.94 ratio also replaces the 1.98 ratio
Comes with a 9-9/16 new style input yoke.
|
|
602-90-104-01A The 1.94 ratio also replaces the 1.98 ratio
Comes with a 8-1/8 input yoke.
This drive is generally used on older inline 6 and 4 cylinder engines.
|
|
602-90-108-02 To replace Counter Rotation units only. Do not use for standard rotation.
Up to 300 HP
|
|
602-90-109-02 Replaces 1986-1993 Cobra Lower
Dog Clutch Lower Unit (Shifts in the lower)
Does not replace King Cobra or Joint Venture
Does not replace 4cyl. units with 4 1/4" bullet diameter case
Standard Rotation
Uses the 1-1/4 propshaft so you will need a new thrust washer for the prop.
|
|
602-GEN-II-1-47-COMP-REV-ROT OE# 5111200LP
Counter rotation unit, do not use for standard rotation.
Comes with a 9-9/16 new style input yoke.
Does not include Complete Install Kit or Anode Kit.
Up to 300 HP
Uses the latest style speedometer fitting - OE#860382. This part is not included and will be required to have a working speedometer.
|
|
602-GEN-II-1-47-COMP Does not Include Complete Install Kit or Anode Kit. Up to 300 HP.
Uses the latest style speedometer fitting - OE#860382. This part is not included and will be required to have a working speedometer.
|
|
602-GEN-II-1-47-COMP-REV-ROT-M For use with 9D-116 Conversion Kit only.
Counter rotation unit, do not use for standard rotation.
Comes with a 9-9/16 new style input yoke.
Does not include Complete Install Kit or Anode Kit.
Up to 300 HP
|
|
602-GEN-II-1-47-COMP-MODIFIED SE116 1.47 Mod. Complete (Replaces Mercruiser Gen II)
|
|
602-GEN-II-1-62-COMP-REV-ROT SE116 1.62 Complete - C.R. (Replaces Mercruiser Gen II)
Counter rotation unit, do not use for standard rotation.
Comes with a 9-9/16 new style input yoke.
Does not include Complete Install Kit or Anode Kit.
Uses the latest style speedometer fitting - OE#860382. This part is not included and will be required to have a working speedometer.
|
|
602-GEN-II-1-62-COMP SE116 1.62 Complete (Replaces Mercruiser Gen II)
Does not Include Complete Install Kit or Anode Kit.
Uses the latest style speedometer fitting - OE#860382. This part is not included and will be required to have a working speedometer.
|
|
