Autometer

• Receiver for Autometer Multi-Function GPS Speedos
• WILL NOT WORK with Speedos other than Autometer MF Speedos
• Coaxial input Cable
• Cable is 16" long

Auto Meter Tach Adapter

This Tach adapter will allow you to connect a tachometer, shift light or RPM activated switch to a distributorless ignition system (Including 1999 and newer Ford Mustangs). This adapter senses the current from the positive coil source wire and converts it into a 12-volt square wave signal that can be read by Auto Meter Tachs and accessories. Compact and completely potted in polyurethane for vibration and moisture protection.

LED Bulb for Autometer Gauges, T3 Wedge

Replaces 161, 193, 194, and 168 style wedge base bulbs only. Available in Red, Green, Blue and Amber.

Autometer Wire Harness Extension 25 ft., Wideband Air / Fuel Ratio, Pro

This harness does not work with the analog gauges, digital gauges only.

Yes: Digital gauges 865-6197, 865-4397, 865-3397

No: Analog gauges 865-200870, 865-200870-33, 865-200870-35, 865-200870-40

Battery Extender

For: 6,8,12 16V/5A

LS Plug & Play Harness with Tach Adapter

This Plug and Play solution lets you quickly and easily install the 105-9117 Tach Adapter onto your LS-derived engine.

Features:
• Does not alter factory wiring
• Plugs into factory ignition coil connectors
• Sealed connector plug

Multi Function GPS Wire Harness

This is a wire harness for the Autometer multi-function GPS. It allows you to use another manufacturers GPS antenna.

Replacement Light Bulb & Socket Assy for Autometer Gauges

4.9 Watt bulb for use with 2-1/16'' and 2-5/8'' gauges with steel cases. Also used in some tachometers and speedometers. Note: Replaces old style socket. Designed for use in Autometer gauges.

Need help measuring your gauges so you know what to look for when you finally upgrade to a more polished set? Check out this handy tutorial!

Replacement Light Bulb for Autometer Gauges

2.7 Watt bulb for use with 2-1/16'' Auto Meter Gauges with plastic cases. Note: Not for use with gauges with BLUE plastic cases.

Need help measuring your gauges so you know what to look for when you finally upgrade to a more polished set? Check out this handy tutorial!

Universal Gauge Wire Harness, for Tach/Speedo/Elec. Gauges

Works With Any Auto Meter Tachometer, Speedometer, and Short Sweep Electric Gauges. Color Coded for Easy Installation.

Wire Harness, Plug & Play GM LS Engines, for #9117 Tachometer Adapter

Features:
• Does not alter factory wiring
• Plugs into factory ignition coil connectors
• 3ft harness length
• Flying leads to hardwire Auto Meter 9117 Tach Adapter

If you’ve tried to get your tach to function after an LS swap, you know that it isn’t always a simple procedure. Save time, frustration and don't make a single cut in your factory wiring with Auto Meter’s Plug and Play LS Tach Harness. This Plug and Play solution lets you quickly and easily install the Auto Meter 9117 Tach Adapter onto your LS-derived engine. OEM spec connectors and wiring assure a hassle free installation that takes minutes rather than hours. No splicing, cutting or risks of voiding your vehicle's warranty. It’s completely reversible and couldn’t be easier. Get the best possible results in the least amount of time with the solution guaranteed to work right, the first time.

3-Terminal Wiring Connectors

• For Electrical Short Sweep Gauges
• Set of 2

8-Terminal Wiring Connectors

• Tach/Speedo Connector
• For Use w/8 Terminal
• Electric

2-1/16" Gauge Bracket Kit, aluminum (qty 3)

2-5/8 Gauge Bracket Kit, aluminum (qty 3)

12V Battery Extender (3.0 amp)

The Battery Extender is designed to maximize the life of a serviceable 12-volt lead acid battery. This means a vehicle battery will not give the annual dead battery surprise when removed from storage. The Extender keeps your battery at full charge on a continuous basis. When a battery is not keep at full charge it becomes sulfated, which is the main reason for premature battery failure. The Battery Extender should be used to charge and maintain all starting and deep cycle batteries in storage or that do not receive daily use. The Extender is fully compatible with gelled electrolyte (gel-cell) batteries. It's superior circuitry automatically delivers the correct charge to compensate for cars that are equipped with computers that require a continuous battery power supply to maintain data memory. Quality built-in and assured with circuit burn-in, as well as computerized testing and inspection to ensure top quality and performance. Care in handling and occasional cleaning of the leads and housing will keep it looking like new, and give you many years of satisfaction. The Extender also comes with two different plug in lead sets. A set with ring terminals that installs permanently in your vehicle makes it easy to quickly plug the Extender in at any time. Also included is a lead set with battery clips for batteries not in use or in storage. Also, allows you to to maintain two batteries on a single Extender by running the batteries in parallel by hooking up a positive and negative lead from battery 1 to battery 2 and hooking the Extender to one of the batteries. The Battery Extender will keep both batteries maintained at a full charge.

12V Battery Extender (1.5 amp)

The Battery Extender is designed to maximize the life of a serviceable 12-volt lead acid battery. This means a vehicle battery will not give the annual dead battery surprise when removed from storage. The Extender keeps your battery at full charge on a continuous basis. When a battery is not keep at full charge it becomes sulfated, which is the main reason for premature battery failure. The Battery Extender should be used to charge and maintain all starting and deep cycle batteries in storage or that do not receive daily use. The Extender is fully compatible with gelled electrolyte (gel-cell) batteries. It's superior circuitry automatically delivers the correct charge to compensate for cars that are equipped with computers that require a continuous battery power supply to maintain data memory. Quality built-in and assured with circuit burn-in, as well as computerized testing and inspection to ensure top quality and performance. Care in handling and occasional cleaning of the leads and housing will keep it looking like new, and give you many years of satisfaction. The Extender also comes with two different plug in lead sets. A set with ring terminals that installs permanently in your vehicle makes it easy to quickly plug the Extender in at any time. Also included is a lead set with battery clips for batteries not in use or in storage. Also, allows you to to maintain two batteries on a single Extender by running the batteries in parallel by hooking up a positive and negative lead from battery 1 to battery 2 and hooking the Extender to one of the batteries. The Battery Extender will keep both batteries maintained at a full charge.

1/8" NPT Female to 10mm x 1 Male Metric Adapter

Metric adapter for adapting oil pressure and temperature gauges

1/8" NPT Female to 12mm x 1.5 Male 

• For Adapting Oil Pressure/Temperature Gauges
• Works On Many Foreign/Domestic Engines