Comp Cams

Crankshaft Turning Sockets - Big Block Chevy

Sockets ease engine rotation during assembly process. Each socket has a provision for a 1/2" drive ratchet

Big Block Chevy Evolution Series Hydraulic Roller Lifter Set

Comp Cams lifters are designed for use in the most demanding of situations. Whether your needs are a standard hydraulic or the captured link bar style hydraulic roller lifters we have you covered.

• Lifter Style: Hydraulic roller
  
• Lifter Link Bars Included: Yes
  
• Lifter Outside Diameter (in.): 0.842 in.
  
• Lifter Offset: None
  
• Link Bar Type: Vertical
  
• Lifter Seat Height (in.): 2.475 in.
  
• Quantity: Sold as a set of 16.
  
• Special Attention: Retrofit roller lifter for early model blocks originally equipped with a flat tappet cam. Tall body fits both standard blocks and tall lifter bore aftermarket blocks.

Big Block Chevy Generation 5 & 6 Adjustable Rocker Conversion

Many of the popular families utilize a positive stop type of rocker arm attachment, which does not allow for any adjustment, and consequently there is no consideration for different cam sizes or other modifications to the engine block and heads For that reason, COMP Cams has designed a kit to convert this setup to a fully adjustable valve train On the Mark (V & VI) Big Block Chevrolet engines replace the screw in studs with those provided, slip the spacer insert through the rocker arm ball, and adjust with the new adjusting nut These kits are a simple, easy, and an inexpensive alternative to give the flexibility of an adjustable valve train.

Includes: (16) 4514 Studs, 4514SP Spacer, 1401-N Rocker Nut

Big Block Chevy High Energy Hydraulic Roller Lifter Set

Comp Cams lifters are designed for use in the most demanding of situations. Whether your needs are a standard hydraulic or the captured link bar style hydraulic roller lifters we have you covered.

• Lifter Style: Hydraulic roller
  
• Lifter Link Bars Included: Yes
  
• Lifter Outside Diameter (in.): 0.842 in.
  
• Lifter Offset: None
  
• Link Bar Type: Vertical
  
• Lifter Seat Height (in.): 2.470 in.
  
• Quantity: Sold as a set of 16.
  
• Notes: Fits Chevy big blocks originally equipped with flat tappet cams.

Big Block Ford 429/460 Hi-Energy Hydraulic Lifter Set

Comp Cams lifters are designed for use in the most demanding of situations. Whether your needs are a standard hydraulic or the captured link bar style hydraulic roller lifters we have you covered.

• Lifter Style: Hydraulic flat tappet
  
• Lifter Link Bars Included: No
  
• Lifter Outside Diameter (in.): 0.875 in.
  
• Lifter Offset: None
  
• Lifter Seat Height (in.): 2.020 in.
  
• Quantity: Sold as a set of 16.

Chevy 265-400 Flat Push Rod Size 5/16"

Guide plates are a must for high lift / spring pressure environments of today's performance engines Each one is designed using stereo lithography design techniques for the ultimate accurate fit COMP Cams guide plates are hardened and black oxide finished They come in many different configurations to fit your specific needs.

Chevy 265-400 Flat Push Rod Size 3/8"

Guide plates are a must for high lift / spring pressure environments of today's performance engines Each one is designed using stereo lithography design techniques for the ultimate accurate fit COMP Cams guide plates are hardened and black oxide finished They come in many different configurations to fit your specific needs.

Chevy 396-454 Raised Push Rod Size 7/16"

Guide plates are a must for high lift / spring pressure environments of today's performance engines Each one is designed using stereo lithography design techniques for the ultimate accurate fit COMP Cams guide plates are hardened and black oxide finished They come in many different configurations to fit your specific needs.

Chevy 396-454 Raised Push Rod Size 3/8"

Guide plates are a must for high lift / spring pressure environments of today's performance engines Each one is designed using stereo lithography design techniques for the ultimate accurate fit COMP Cams guide plates are hardened and black oxide finished They come in many different configurations to fit your specific needs.

Chevy V6 (4.3) 262, 1987-92

Competition double roller timing sets are the industries' most reliable They are pre-stretched and heat treated They are dynamically balanced and have a large pin chain for maximum performance.

Chevy V8 265-400, 1955-91 (except with factory roller cam)

Competition double roller timing sets are the industries' most reliable They are pre-stretched and heat treated They are dynamically balanced and have a large pin chain for maximum performance.

Chevy V8 396-454, 1965-91

Competition double roller timing sets are the industries' most reliable They are pre-stretched and heat treated They are dynamically balanced and have a large pin chain for maximum performance.

Hydraulic - good for inboard/outboard, pleasure use, 1600-5400 RPM

Duration in Degrees				Lift with 1.7 Rocker Arms		Lobe Sep. Angle
Advertised		@ .050"
In.	Ex.	In.	Ex.	In.	Ex.
270	276	218	224	.510	.510	112°

Note: These are non returnable

Hydraulic - good mid-range and throttle response, good for small blower, noticeable idle, 1600-5800 RPM

Duration in Degrees				Lift with 1.7 Rocker Arms		Lobe Sep. Angle
Advertised		@ .050"
In.	Ex.	In.	Ex.	In.	Ex.
270	286	226	236	.544	.547	112°

Note: These are non returnable

Hydraulic - good for jet with A or B impeller, bracket racing or performance use, 2800-6200 RPM

Duration in Degrees				Lift with 1.7 Rocker Arms		Lobe Sep. Angle
Advertised		@ .050"
In.	Ex.	In.	Ex.	In.	Ex.
290	302	242	248	.566	.566	112°

Note: These are non returnable

Hydraulic - good for jet with A or B impeller, bracket racing or performance use, 2800-6200 RPM

Duration in Degrees				Lift with 1.7 Rocker Arms		Lobe Sep. Angle
Advertised		@ .050"
In.	Ex.	In.	Ex.	In.	Ex.
296	302	242	248	.566	.566	112°

Note: These are non returnable

Comp Cams BBC Gen 4 & 5 Hydraulic Roller Camshaft

Hydraulic Roller - now we're talking large supercharger, 10 lbs of boost, 540 to 650 C.I., capable of making big HP and still idle.

Duration in Degrees				Lift with 1.7 Rocker Arms		Lobe Sep. Angle
Advertised		@ .050"
In.	Ex.	In.	Ex.	In.	Ex.
318	329	256	264	.657	.612	114°

Note: These are non returnable

These cams are made from high quality billet blanks.

Comp Cams BBC Gen 4 & 5 Hydraulic Roller Camshaft

Hydraulic Roller - this is an incredible camshaft for your late model 454/502 Magnum EFI engine, big power going, yet still EFI compatible

Duration in Degrees				Lift with 1.7 Rocker Arms		Lobe Sep. Angle
Advertised		@ .050"
In.	Ex.	In.	Ex.	In.	Ex.
283	290	223	230	.566	.575	114°

Note: These are non returnable

These cams are made from high quality billet blanks.

Comp Cams BBC Gen 4 & 5 Hydraulic Roller Camshaft

Hydraulic Roller - great supercharger cam designed for 540 and larger engines, requires dry offshore style exhaust

Duration in Degrees				Lift with 1.7 Rocker Arms		Lobe Sep. Angle
Advertised		@ .050"
In.	Ex.	In.	Ex.	In.	Ex.
318	329	252	262	.612	.612	114°

Note: These are non returnable

These cams are made from high quality billet blanks.

Comp Cams BBC Gen 4 & 5 Hydraulic Roller Camshaft

Hydraulic Roller - perfect for a customer seeking HP 500 style performance with a silent choice style exhaust system.

Duration in Degrees				Lift with 1.7 Rocker Arms		Lobe Sep. Angle
Advertised		@ .050"
In.	Ex.	In.	Ex.	In.	Ex.
284	284	224	224	.566	.566	112°

Note: These are non returnable

These cams are made from high quality billet blanks.