Hardin Marine

Fuel Line And Regulator Kit - Dominator Fuel Lines Only

-6 Size

Here's an all NEW line and regulator kit that solves the age old problem of how to mount the regulator close to the carburetor. Precision bent stainless fuel line with all the necessary connection fittings make this the ultimate single carbureted fuel delivery system. Designed to work with the 715-13201 Aeromotive Regulator, see related parts.

Fuel Line And Regulator Kit For 4150 Style Holley

Here's an all NEW line and regulator kit that solves the age old problem ofhow to mount the regulator close to the carburetor. Precision bentstainless fuel line with all the necessary connection fittings make this theultimate single carbureted fuel delivery system. Regulator has -6 ORB fitting.

Fuel Line And Regulator Kit For 4500 Dominator

Here's an all NEW line and regulator kit that solves the age old problem ofhow to mount the regulator close to the carburetor. Precision bentstainless fuel line with all the necessary connection fittings make this theultimate single carbureted fuel delivery system.

Fuel Line And Regulator Kit For Mechanical Secondary Demon Carburetors

Here's an all NEW line and regulator kit that solves the age old problem ofhow to mount the regulator close to the carburetor. Precision bentstainless fuel line with all the necessary connection fittings make this theultimate single carbureted fuel delivery system. Regulator has -6 ORB fitting

Fuel Line Return To Tank Adapter - 1-1/2" O.D With 3/8" NPT Female Pipe Connection

These stainless steel fuel return adapters are perfect for an EFI conversion or any high output return style fuel system. These allow you to simply remove a small section of your 1-1/2" fuel fill hose and clamp the adapter in place - no welding required. 4" long.

Fuel Line Return To Tank Adapter - 2" O.D With 3/8" NPT Female Pipe Connection

These stainless steel fuel return adapters are perfect for an EFI conversion or any high output return style fuel system. These allow you to simply remove a small section of your 2" fuel fill hose and clamp the adapter in place - no welding required. 4" Long.

Fuel Lines Only for 4150 Style Holley (Regulator Not Included)

Here's an all NEW line and regulator kit that solves the age old problem of how to mount the regulator close to the carburetor. Precision bent stainless fuel line with all the necessary connection fittings make this the ultimate single carbureted fuel delivery system. Designed to work with the 715-13201 Aeromotive Regulator, see related parts.

Fuel Lines Only for Mechanical Secondary Demon Carburetors (Regulator Not Included)

Here's an all NEW line and regulator kit that solves the age old problem of how to mount the regulator close to the carburetor. Precision bent stainless fuel line with all the necessary connection fittings make this the ultimate single carbureted fuel delivery system. Designed to work with the 715-13201 Aeromotive Regulator, see related parts.

• Handmade, hand calibrated, tested for accuracy
• Bold, clear dials, white back light, and a red needle
• Non-corrosive hardware
• Gasket sealed lens and bezel to prevent fogging
• Plastic body Domelux Technology Lens
• White back light
• Senders sold separately
• 2 1/16 hole size, Outer diameter 2 5/16
• Not Designed to be used with Diesel Engines.

Need help measuring your gauges so you know what to look for when you finally upgrade to a more polished set? Check out this handy tutorial!

Fuel Pressure Sender 0-15 PSI for Old Style (Pre-2018) Hardin Gauges

Fuel Pressure Sender 0-60 PSI for Old Style (Pre-2018) Hardin Gauges

Fuel Pump Relay Kit

This Hardin Marine kit is intended primarily for those application running an electric fuel pump. The long wire runs in these kinds of installations can sometimes result in a voltage drop at the electric pump. Installation of this kit is good insurance that the fuel pump will be receiving full voltage from the battery.

Features:

• Can be used with any electric fuel pump, as long as the current load is not above 30 amps
• 30 amp relay is included with a relay socket wired with long leads specifically designed to reduce the number of splices required
• Quality insulated crimp connectors are provided to make the necessary splices, where required.

• Detailed instruction included

Fuel Pump Safety Switch

This fuel pump safety switch is designed to shut off your electric fuel pump when the engine oil pressure drops below 15 lbs.  It can easily be "Tee'd" into the oil pressure ending unit off the block.  Designed for 12Volt systems.

Fuel Sender Gasket

• ID: 1.50"
• OD: 2.70"

Replacement Gasket For Use With: 2-Wire, 3-Wire and Adjustable Fuel Level Senders

Full Time Inline Silencers - 3"

These full time in-line silencers are perfect for almost any application. They simply splice into your existing exhaust hose without any additional modifications. Their 100% stainless steel construction makes them a perfect replacement for fiberglass-style mufflers This model accepts a 3" hose connection and is 10" long. Center section has 4" diameter. 8-10 decibel reduction. Sold in pairs.

Full Time Inline Silencers - 3-1/2"

These full time in-line silencers are perfect for almost any application. They simply splice into your existing exhaust hose without any additional modifications. Their 100% stainless steel construction makes them a perfect replacement for fiberglass-style mufflers This model accepts a 3-1/2" hose connection and is 10" long. 8-10 decibel reduction. These silencers are rated up to 425HP. Sold in pairs. For Wet Exhaust.

Full Time Inline Silencers - 4"

These full time in-line silencers are perfect for almost any application. They simply splice into your existing exhaust hose without any additional modifications. Their 100% stainless steel construction makes them a perfect replacement for fiberglass-style mufflers This model accepts a 4" hose connection and is 5" long. Sold in pairs. These silencers are rated up to 425HP without any HP loss.

These are rebuild kits for #137-8000 trim rams.

1. 137-8008, GLAND, FRONT - 5/8 SHAFT, 1
2. 137-8009 ,PISTON, TRIM RAM, 1
3. 137-8128, SEAL, WIPER - TRIM RAM, 1
4. 625-1114, O-RING, 3
5. 625-1135, O-RING, 1
6. 625-1325, O-RING, 1

Kit Includes:
• 2 Nuts and washers
• 1 Trim Ram Pin with Actuator provision
• 1 Trim Table Cable End with nut and washer
• 4 Bushings
• 2 Spacers

These are rebuild kits for #137-8005 trim rams.

1. 137-8013, GLAND, HD TRIM RAM, 1
2. 137-8014, PISTON, HD TRIM RAM, 1
3. 137-8129, SEAL, WIPER - HD TRIM RAM, 1
4. 625-1116, O-RING, 3
5. 625-1135, O-RING, 1
6. 625-1325, O-RING, 1

These are new Stainless Steel replacement sea pumps. We have configured options so that you may buy just a replacement pump only or bracket only or even an entire replacement pump assembly including the mounting bracket, Serpentine pulley and mandrel. This model include a beautifully polished billet bracket and Serpentine Pulley and Mandrel.

NOTE: Billet bracket cannot be used in Circ Pump applications!

These are new Stainless Steel replacement sea pumps. We have configured options so that you may buy just a replacement pump only or bracket only or even an entire replacement pump assembly including the mounting bracket, V-groove pulley and mandrel.

Gen 5/6 Sea Pump Vent Equalizer

• 625-4118
  
• 625-4176
• 625-4219