Generic

Material: Brass, Fits: 1" w/o Safety Chain, Pkg.: Bulk

Brass. No safety chain.

Material: Brass, Fits: 1", Pkg.: Card

Sold: Each

Material: Brass, Fits: 1", Pkg.: Bulk

Material: Brass, Fits: 1", Pkg.: P.O.P Display - 30 Pcs.

Provides for withdrawal from one tank at a time only
Connects 2 permanent tanks to a single motor
Valves meet ABYC H-24 requirements and provide anti-siphon protection NOT TO BE USED IN POTABLE WATER SYSTEMS.

• Provides for withdrawal from one tank at a time only


• Connects 2 permanent tanks to a single motor


• Valves meet ABYC H-24 requirements and provide anti-siphon protection

Thread: 1/4" FNPT (click valve)", Outlet: Side

Sold: Each

Provides for withdrawal from one tank at a time only
Connects 2 permanent tanks to a single motor
Valves meet ABYC H-24 requirements and provide anti-siphon protection

• Provides for withdrawal from one tank at a time only


• Connects 2 permanent tanks to a single motor


• Valves meet ABYC H-24 requirements and provide anti-siphon protection

Thread: 1/4" FNPT", Outlet: Bottom

Sold: Each

Stamped brass.

Positions: On/Off, Terminals: 2 Screws, Type: SPST

Feature plugs in attractive handy 4-color countertop display carton. Popular boat accessory. 48 pieces in display.

Type: Turn-Tite, Material: Brass, Fits: 1"

Sold: Pack

Bravo and Bravo XR Drive Spacers

These are for standard Bravo and Bravo XR. Available from 1/2" to 3". Includes O-Rings, Seal and new bolts.

NOTE: Larger spacers like 2" and 3" are stacked 1" spacers and are not single units

Bravo Hi-Performance Swivel Shaft

This swivel shaft is made from 174-PH stainless steel and is heat treated for maximum strength. This stainless has the corrosion resistance of 304 stainless steel. By using this shaft, the life of your gimbal ring and gimbal housing seal will be greatly increased. This shaft replaces OEM #98230A1 and #866718A01.

Fits: Alpha Gen II, Bravo I, II, III

Fits Bravo II 1988- present, Bravo III 1995-2002. Includes attaching hardware.
Kit contains the following part #s: 76214, 821630, 806190 (x2).

Material: Zinc

Sold: Box

McGard Prop Locks - Bravo III / Blackhawk

• Overall Lock Length: 1.025"
• Thread Size: 1" - 14
• Hex Size: 1 - 7/16"
• Set of 1 Lock and 1 Key

Propeller theft is on the rise, don't take a chance on losing your favorite outdrive or prop, for that matter be safe not sorry. Protect yourself against expensive propeller theft with a McGard propeller lock, featuring the same patented design as our stern drive and outboard motor locks. A free-spinning collar will turn if attacked by gripping tools without loosening the lock. Constructed of naval brass and hardened stainless steel, once installed our propeller lock offers maximum security for 24 hour protection.

Bravo III 2004-present.
Bravo 3 Kit Includes:
CM762145 Trim Tab
CM821630C2 Driveshaft Housing
CM806190 Trim Ram (2)
CM762144 Trim Tab
CM865182C Prop Nut

Material: Aluminum, Case: 10

Sold: Pack

Bravo III 2004-present.
Bravo 3 Kit Includes:
CM762145 Trim Tab
CM821630C2 Driveshaft Housing
CM806190 Trim Ram (2)
CM762144 Trim Tab
CM865182C Prop Nut

Material: Magnesium, Case: 10

Sold: Pack

Bravo III 2004-present.
Bravo 3 Kit Includes:
CM762145 Trim Tab
CM821630C2 Driveshaft Housing
CM806190 Trim Ram (2)
CM762144 Trim Tab
CM865182C Prop Nut

Material: Zinc, Case: 10

Sold: Box

The best protection available against costly propeller theft. Once installed the McGard propeller lock offers 24 hour protection during use, storage and transit. A free-spinning collar will turn if attacked by gripping tools without loosening the lock. Constructed of naval brass and hardened stainless steel for maximum security.

Fits: Sterndrives: MerCruiser Bravo III (up to 2003), Blackhawk., Thread: 1-14

Sold: Each

• Replaces all Bravo and B-Max shift rings that have left hand threads.
• *Note: This shift ring will not replace early style press on rings. 
• GearMUST have left hand fine threads.
• *This part is not available from Mercury.

Bravo Swivel Shaft Cover Plate Installation Kit

This kit will provide you with all the parts necessary to cut a hole in the back of your gimbal housing and remove the swivel shaft. This kit comes with a pre-drilled buffed stainless steel plate and gasket, all necessary hardware, instructions and cut out template. A recommended optional tool kit, P/N 528-1020 is available for easier dis-assembly and re-installation for the swivel shaft. This kit will only work on Bravo 1, Bravo 2, Bravo 3, and Alpha 1 Gen 2.

Fits: Bravo 1 , Bravo 3, Alpha gen 2.

Slow blow thermal magnetic breaker.

Amps: 70, Fits: Pro Series 1000, Pro-Fish 1000

Amps: 50, Fits: Pro Series 700, Pro Fish 700

Bronze 1-1/8" Rudder Quadrant

• Made from 6061-T6 aluminum.
• Quadrant has a 5” radius
• 1/4” keyway

This heavy duty quadrant has a clamp type boss for simple installation. The bolt locks the quadrant to the shaft. Quadrant has a 5” radius and a 1/4” keyway for added safety.