560-74042 McGard- Chrome Cone Seat Trailer 2 Wheel Lock Set
- Overall Lock Length: 1.46"
- Thread Size: 1/2" - 20
- Hex Size: 13/16"
- Cone Seat Style Wheel Locks
- Set of 2 Locks and 1 Key
Trailer Wheel Applications: 2 wheel locks for single axle trailers.
McGard wheel locks & lug nuts for boat trailers are made to the same proven quality as our automotive line of products. For steel or alloy wheels, simply replace one of the lug nuts with a McGard wheel lock. Our wheel locks and matching lug nuts are machined from high quality steel, through-hardened and then triple-nickel chrome plated for durability and long-lasting beauty. Every McGard Lug Nut is guaranteed for life not to rust, chip, or peel!
|
|
560-74041 McGard- Chrome Cone Seat Trailer 4 Wheel Lock Set
- Overall Lock Length: 1.46"
- Thread Size: 1/2" - 20
- Hex Size: 13/16"
- Cone Seat Style Wheel Locks
- Set of 4 Locks and 1 Key
Trailer Wheel Applications: 4 wheel locks for double axle trailers.
McGard wheel locks & lug nuts for boat trailers are made to the same proven quality as our automotive line of products. For steel or alloy wheels, simply replace one of the lug nuts with a McGard wheel lock. Our wheel locks and matching lug nuts are machined from high quality steel, through-hardened and then triple-nickel chrome plated for durability and long-lasting beauty. Every McGard Lug Nut is guaranteed for life not to rust, chip, or peel!
|
|
462-9-0515DP4CHR Chrome plated bronze with removable 30 mesh, monel wire screen flame arrester. Designed to meet the requirements of the USCG safety standards for gasoline fuel systems. Type: Straight, Hose: 1/2", Max Hull Thickness: 5/8" Sold: Each
|
|
462-9-0509DP5CHR Removable 30 mesh stainless steel wire screen flame arrester. Designed to meet the requirements of the USCG safety standards for gasoline fuel systems. Material: Chrome Bronze, Hose: 3/4", Max Hull Thickness: 5/8" Sold: Each
|
|
462-9-0509DP4CHR Removable 30 mesh stainless steel wire screen flame arrester. Designed to meet the requirements of the USCG safety standards for gasoline fuel systems. Material: Chrome Bronze, Hose: 5/8", Max Hull Thickness: 3/4" Sold: Each
|
|
462-9-1189DP0CHR "Rated for 15 amp at 12 volts. Polarized double contact connector. Flange gasket with integral waterproof cap for base when plug is removed. Measures 1-5/8" diameter. 1-3/16" height. Screw size is 4. Not ignition protected. Conforms to U.S.C.G. electrical standards."
Description: Chrome/Brass Deck Connector
Sold: Each
|
|
462-354-091852 Chrome Plated Zinc Cable Clamp, Bulk A: 3/16", B: 1-3/16", C: 11/16", Pack: 1 Sold: Each
|
|
462-354-0918521 Chrome Plated Zinc Cable Clamp, Pair A: 3/16", B: 1-3/16", C: 11/16", Pack: 2 Sold: Pack
|
|
462-354-2065301 Carded. #8 FH Fastener.
A: 2-7/8", B: 1-7/16", C: 1-7/16", D: 1-1/2", E: 3/16", Pack: 2
Sold: Pack
|
|
462-9-1190DP0CHR "Rated for 15 amp at 12 volts. Polarized double contact connector. Flange gasket with integral waterproof cap for base when plug is removed. Measures 1-5/8" diameter. 1-3/16" height. Screw size is 4. Not ignition protected. Conforms to U.S.C.G. electrical standards."
Description: Chrome/Zinc Deck Connector
Sold: Each
|
|
462-11-MP39580 "Sierra push pull switches feature solid brass construction with stainless steel springs. 3/8" Diameter mounting stem fits panels up to 1" thick. 15 amp @12VDC, 25A @24VDC.
MP39400: used to control the same circuit from two locations.
MP39600: energizes two separate circuits in the ON position.
MP39640: first pull energizes circuit 1, second pull energizes circuit 2.
MP39570, MP39580, & MP39590: first pull energizes circuit 1, second pull energizes circuits 1&2.
MP39610 & MP39620: first pull energizes circuit 1, second pull energizes circuits 2&3."
Description: Off/On (1)/On (1&2) , Type: SPDT, Terminals: 3 screw, Knob: Chr/ Brass
Sold: Each
|
|
462-255-TBC2 2" Chrome Tow Ball with 1" Shank. Weight Rating 8,000 lbs.
Ball: 2", Shank: 1", Capacity: 8,000 lbs
|
|
462-354-044204 Die cast zinc chrome plated. Complete with galvanized studs, washers and nuts threaded into each leg of the cleat, eliminating the need for fasteners and provides a clean looking installation. Interchangeable with Perko® style 1210 cleats.
A: 4", B: 1-1/4", C: 1-1/2", D: 2-15/16", Case: 10
Sold: Each
|
|
462-354-3517501 Die cast zinc chrome plated. Cap includes chain. Use #10 FH fastener.
Type: Gas, Hose: 1-1/2", Flange: 3-1/8"
Sold: Each
|
|
462-354-0446041 Die cast zinc chrome plated. Cleats are interchangeable with Perko® style 1188 cleats. A: 4" , B: 1-1/4" , C: 1-1/2" , D: 1-1/16" , Fastener: #10, Case: 10
|
|
462-354-044206 Die cast zinc chrome plated. Complete with galvanized studs, washers and nuts threaded into each leg of the cleat, eliminating the need for fasteners and provides a clean looking installation. Interchangeable with Perko® style 1210 cleats.
A: 6", B: 1-9/16", C: 2-1/4", D: 3-1/4", Case: 10
Sold: Each
|
|
462-354-455001 "Improved cast brass, not "Spun Brass". Meets Coast Guard, ABYC and NMMA requirements. Mounting bracket included." Size: 6", Finish: Chrome Brass
|
|
462-354-455721 "Improved cast brass, not "Spun Brass". Meets Coast Guard, ABYC and NMMA requirements. Mounting bracket included." Size: 8", Finish: Chrome Brass
|
|
462-354-3226201 Sand cast brass chrome plated
A: 2", B: 3-1/4", C: 4-5/16", D: 1-13/16", E: 13/16", F: 3-7/16"
|
|
462-354-5121101 "Designed to provide a fresh water hookup to a pressurized water system while moored. Has standard female swivel hose connector. Complete with black plastic, water tight plug when not connected to on shore water. Pipe size: 1/2" FIPT x 3/4" FGHT." A: 2-3/4", B: 2-3/8", C: 2-3/16", D: 1", Material: Chrome/Brass, Case: 10 Sold: Each
|
|
