462-166-450 Socks for your prop. Protect prop from expensive repairs from road kickback when towing. Made out of bright, molded plastic and simply slip over each propeller blade and sox are held in place with a rubber cinch strap. Set of three socks, cinch strap and 3 reflector hot-dots included.
|
|
462-166-460
- Reduces troll speed in "down" position; acts as a stabilizer in "up" position
- Maintains stability in bow-light boats
- Smooths out ride in rough water
- Reduces porpoising and cavitation
- Made of only highest quality stainless steel and marine aluminum; clear anodized aluminum finish
- Installs in 15 minutes
- Stainless steel mounting hardware and installation & operating instructions provided with each unit
- Size: Large, Fits: I/O's and outboards 50 hp and larger
|
|
462-166-461
- Reduces troll speed in "down" position; acts as a stabilizer in "up" position
- Maintains stability in bow-light boats
- Smooths out ride in rough water
- Reduces porpoising and cavitation
- Made of only highest quality stainless steel and marine aluminum; clear anodized aluminum finish
- Installs in 15 minutes
- Stainless steel mounting hardware and installation & operating instructions provided with each unit
- Size: Small, Fits: Outboard motors from 20 to 50 hp
|
|
462-166-5141 Tough, strong, non corrosive polycarbonate. Universally fits all Davis Versapoles, all Team telescoping and other boat hooks including Garelick. Case: 6 Sold: Each
|
|
462-166-2400 - Progressive tension design means the further the Line Snubber stretches, the greater its return force for smooth action and moderated stress
- The patented internal line limiter is made of 2500 lb. (1140 kg) test nylon webbing. Line snubber's outer sheath is 3500 lb. (1590 kg) test tubular nylon webbing that is UV resistant to protect internal parts
- Shockles are strong, but they need to be rigged inline so they never bear the full load alone. Six to 12" (15-30 cm) of slack is recommended. Increase line slack between the attachment loops to a maximum of 12" (30 cm) as loads increase
- Line Snubber has a maximum stretch of 16" (40 cm) before the line limiter safely stops further
Color: Blue - Progressive tension design means the further the Line Snubber stretches, the greater its return force for smooth action and moderated stress
- The patented internal line limiter is made of 2500 lb. (1140 kg) test nylon webbing. Line snubber's outer sheath is 3500 lb. (1590 kg) test tubular nylon webbing that is UV resistant to protect internal parts
- Shockles are strong, but they need to be rigged inline so they never bear the full load alone. Six to 12" (15-30 cm) of slack is recommended. Increase line slack between the attachment loops to a maximum of 12" (30 cm) as loads increase
- Line Snubber has a maximum stretch of 16" (40 cm).
- The slack line may be wrapped around Line Snubber to neaten it up.
|
|
462-166-2410 - Progressive tension design means the further the Line Snubber stretches, the greater its return force for smooth action and moderated stress
- The patented internal line limiter is made of 2500 lb. (1140 kg) test nylon webbing. Line snubber's outer sheath is 3500 lb. (1590 kg) test tubular nylon webbing that is UV resistant to protect internal parts
- Shockles are strong, but they need to be rigged inline so they never bear the full load alone. Six to 12" (15-30 cm) of slack is recommended. Increase line slack between the attachment loops to a maximum of 12" (30 cm) as loads increase
- Line Snubber has a maximum stretch of 16" (40 cm) before the line limiter safely stops further
Color: Black - Progressive tension design means the further the Line Snubber stretches, the greater its return force for smooth action and moderated stress
- The patented internal line limiter is made of 2500 lb. (1140 kg) test nylon webbing. Line snubber's outer sheath is 3500 lb. (1590 kg) test tubular nylon webbing that is UV resistant to protect internal parts
- Shockles are strong, but they need to be rigged inline so they never bear the full load alone. Six to 12" (15-30 cm) of slack is recommended. Increase line slack between the attachment loops to a maximum of 12" (30 cm) as loads increase
- Line Snubber has a maximum stretch of 16" (40 cm).
- The slack line may be wrapped around Line Snubber to neaten it up.
|
|
462-661-8003 Backlit meters have a face size of 2.625" W x 1.260" H and can either surface or panel mount. (Separate 12V or 24V connection required for lighting)Voltmeter: 8-16 Volt DC scale in .2 volt increments.Ammeters: Scales shown below. All models include either an internal or external shunt as noted and a 2 wire connection. Description: Analog Voltmeter, 8-16V DC
|
|
462-661-8017 Backlit meters have a face size of 2.625" W x 1.260" H and can either surface or panel mount. (Separate 12V or 24V connection required for lighting)Voltmeter: 8-16 Volt DC scale in .2 volt increments.Ammeters: Scales shown below. All models include either an internal or external shunt as noted and a 2 wire connection. Description: Ammeter & Shunt 0-100A DC
|
|
462-661-8022 Backlit meters have a face size of 2.625" W x 1.260" H and can either surface or panel mount. (Separate 12V or 24V connection required for lighting)Voltmeter: 8-16 Volt DC scale in .2 volt increments.Ammeters: Scales shown below. All models include either an internal or external shunt as noted and a 2 wire connection. Description: Ammeter & Shunt 0-50A DC
|
|
462-661-8235 Large, bright LED characters have 3 levels of brightness for easy monitoring of key functions in a splash-proof case. Easy to surface mount in a 2" round hole. Face size is 2.625" W x 1.260" H.8235: 0-60VDC at .01V resolution and has a manual sleep mode.8248: Includes all the features of 8251 plus display amps from -500 to +500 amps DC and includes a 500A shunt. Description: DC Digital Voltmeter
|
|
462-661-8248 Large, bright LED characters have 3 levels of brightness for easy monitoring of key functions in a splash-proof case. Easy to surface mount in a 2" round hole. Face size is 2.625" W x 1.260" H.8235: 0-60VDC at .01V resolution and has a manual sleep mode.8248: Includes all the features of 8251 plus display amps from -500 to +500 amps DC and includes a 500A shunt. Description: DC Digital Multimeter w/Alarm
|
|
462-661-8051 Includes 8235 DC digital voltmeter which reads 0-60V DC at .01V resolution with a manual sleep mode. Size: 5-1/4" W x 3-3/4" H Includes 8235 DC digital voltmeter which reads 0-60V DC at .01V resolution with a manual sleep mode.
|
|
462-661-8214 Tough, weatherproof Lexan material. Features 60 common DC labels. Used on all Contura waterproof breaker and fuse panels and ST blade fuse blocks. Black.
:
Sold: Each
|
|
462-469-81400300 DC Master series converts 20-32VDC to 12VDC. Recreational and semi-professional use. Easy to install using included mounting bracket. Surge power available for two minute intervals, ideal for active marine telephone use
Amps: 12 Continuous, 18 Surge
Sold: Each
|
|
462-469-81400200 DC Master series converts 20-32VDC to 12VDC. Recreational and semi-professional use. Easy to install using included mounting bracket. Surge power available for two minute intervals, ideal for active marine telephone use
Amps: 6 Continuous, 10 Surge
Sold: Each
|
|
462-6-186800920 Ideal for transferring diesel fuel. Self priming to about three feet and can pump a discharge head up to thirty feet. Pump head can be rotated in 90° increments on motor. NOT TO BE USED IN POTABLE WATER SYSTEMS. GPM: 6, Ports: 1/2" NPT Int./1" Ext. Barb", Volts: 12, Amps: 8 Sold: Each
|
|
462-124-RH5XL Utilizes hi-tech materials and state of the art engineering to bring the ultimate in performance, value and style. All weather grips for easier handling in cold, wet, or high temperatures. Weatherproof lock cylinder for trouble free use. Strong, reversible automotive style key is easy to insert and remove even with gloves on. Fits comfortably on your key ring. Double chrome plating provides automotive grade durability and corrosion resistance. Strong, tough one piece machined carbon steel pin. Patented screw and lock security. Rugged, pick proof threaded connection that will not false lock.
- 2" x 2" Class III and Class IV and 2-1/2" x 2-1/2" trailer hitches Class V or any hitch requiring a 3-5/8" span e.g. Chevy/GM HD truck line.
- Pin diameter: 5/8"
- Inside width: 3-5/8"
- Overall length: 6-7/8"
|
|
462-32-91010 "Low profile stainless steel peg and bases make hanging fenders fast and easy. The peg fits in old style fender lock brackets. Set includes peg, bracket and screws. Rope size up to 1/4"."
Description: Model 1010 display (12 sets)
Sold: Pack
|
|
462-354-340041 Made from injection molded ABS. Uses #10 FH Fasteners. Bulk. Size: 5-5/8", Cut Out: 3-7/8", Color: White
|
|
462-354-3570311 "Injection molded fiberglass filled nylon. Does not require grounding. Each deck fill has a special cap with a built-in key for easy cap removal. Cap threads are 1-1/4" x 11-1/2 NPSM-Straight. Gas, diesel, & water caps include safety chain. # 10 fastener."
Type: Diesel, Color: Green, A: 1-1/2" Hose", B: 2-1/2", C: 3-3/8", Pkg.: Card
Sold: Each
|
|
