Generic

Oval fenders are ribbed and shaped to resist rolling, for less swing and wear on hull sides. The seamless design is guaranteed against splitting or bursting for the life of the fender. The thick-wall reinforced eye ends hold a heavy duty line up to 3/4'' thick. Lifetime guarantee. Made in the USA.

Size: 6" x 24", Color: White, Case: 6

"The Racor 100 Series features a variety of compact sizes to fit the most cramped engine compartments. All units feature 1/4"-18 NPTF inlet and outlet fuel ports and a unitized mounting bracket. All 100 Series assemblies feature spin-on, high-capacity, Aquabloc^® II replaceable filter elements which stop water, remove solid contamination (model 110A is a cartridge element and is available with a 10 micron element only). Filtration needs should be based on application, fuel quality, operating climates, and maintenance schedules. All units feature spin-on contaminant collection bowls. Clear bowls will not discolor from alcohol, additives, or UV light and have a leak-proof, positive seal drain for easy servicing (except the 110A). Water and contamination levels can be seen easily at a glance.
110A: Designed for fuel-injected gasoline engines with high working pressures and also can be used on diesel engines. A metal housing is standard. Typical applications include smaller diesel and gasoline engines used in generator sets, pressure washers, and other equipment. Max pressure 100 psi. Rated 15 GPH for diesel, 35 GPH for gasoline.
120AS: Offers reliable protection for smaller diesel and gasoline engines used in generator sets, pressure washers, and other equipment. Max pressure 70 psi."

GPH: 15/35, Micron: 10, Ports: 1/4"-18 NPTF", Bowl: Metal, Size: 3.3" D x 3.2" W x 6" H"

Sold: Each

FGC500 Fuel Filter Catch Cup

The FGC500 is a compact, easy-grip fuel filter cup that makes it easy to grip the fuel filter and stop fuel from spilling over your hands, engine compartment, or bilge.

• Compact & Flexible: 5-1/4” tall-deep x 4” wide (bottom) 6” wide at (top)
• Weighs: 10oz
  
• Red PVC with 2nd Dip of rough Black PVC for easy gripping.
  
• Helps: to stop spillage in changing area, engine compartment, and/or boat bilge.
  
• Designed for: FST’s RF500M spin-on and/or Mercury Racing’s 8M0000202 spin-on fuel filters only.
  
• Designed and Made in the USA

Non-abrasive, protective coating for fiberglass. Contains polymers, carnauba wax and other ingredients. Assures protection against sun, acid rain, salt spray, grime, exhaust stains, etc.

Description: Fiberglass Boat Wax, Size: Pint, Case: 12

Sold: Each

Heavy duty, scratch-free, all purpose cleaner for fiberglass decks, hulls and transoms. Removes waterline stains, algae, rust, exhaust, oxidation and grime. For use with fresh or salt water. 98% biodegradable earth-friendly formula.

Description: Fiberglass Heavy Duty Powder Cleaner, Size: 1 lb. 10 oz.

Sold: Each

Non abrasive, stain lifting gel, ideal for fiberglass. Chemically lifts waterline, rust, growth and tough exhaust stains. It is especially well suited for new boats.

Description: Fiberglass Stain Lifter, Size: 16 oz., Case: 6

Sold: Each

For exhaust hose, elbows, hump hose & reducers. Fire retardant/heat resistant USA made (install minimum 2' downstream from point of cooling water injection.) 200° max continuous operating temperatures.

OD: 3-1/2", Length: 4"

Sold: Each

For exhaust hose, elbows, hump hose & reducers. Fire retardant/heat resistant USA made (install minimum 2' downstream from point of cooling water injection.) 200° max continuous operating temperatures.

OD: 5", Length: 6"

Sold: Each

For exhaust hose, elbows, hump hose & reducers. Fire retardant/heat resistant USA made (install minimum 2' downstream from point of cooling water injection.) 200° max continuous operating temperatures.

OD: 6", Length: 6"

Sold: Each

For exhaust hose, elbows, hump hose & reducers. Fire retardant/heat resistant USA made (install minimum 2' downstream from point of cooling water injection.) 200° max continuous operating temperatures.

OD: 8", Length: 8"

Sold: Each

Calibrated check valve creates air-lock to keep lube from running out while you install drain plug. Includes 4' hose.

Description: Check Valve

Sold: Each

The lower the micron rating, the finer the filtration. Follow your engine manufacturer's recommendation for fuel filter micron rating.
S = Secondary/Final 2 micron (Brown cap)
T = Primary or Secondary/Final 10 micron (Blue cap)
P = Primary 30 micron (Red cap)

Color: Blue, Micron: 10, Fits: 390RC/490R/690R, Case: 6

The lower the micron rating, the finer the filtration. Follow your engine manufacturer's recommendation for fuel filter micron rating.
S = Secondary/Final 2 micron (Brown cap)
T = Primary or Secondary/Final 10 micron (Blue cap)
P = Primary 30 micron (Red cap)

Color: Brown, Micron: 2, Fits: 390RC/490R/690R, Case: 6

"The Racor 100 Series features a variety of compact sizes to fit the most cramped engine compartments. All units feature 1/4"-18 NPTF inlet and outlet fuel ports and a unitized mounting bracket. All 100 Series assemblies feature spin-on, high-capacity, Aquabloc^® II replaceable filter elements which stop water, remove solid contamination (model 110A is a cartridge element and is available with a 10 micron element only). Filtration needs should be based on application, fuel quality, operating climates, and maintenance schedules. All units feature spin-on contaminant collection bowls. Clear bowls will not discolor from alcohol, additives, or UV light and have a leak-proof, positive seal drain for easy servicing (except the 110A). Water and contamination levels can be seen easily at a glance.
110A: Designed for fuel-injected gasoline engines with high working pressures and also can be used on diesel engines. A metal housing is standard. Typical applications include smaller diesel and gasoline engines used in generator sets, pressure washers, and other equipment. Max pressure 100 psi. Rated 15 GPH for diesel, 35 GPH for gasoline.
120AS: Offers reliable protection for smaller diesel and gasoline engines used in generator sets, pressure washers, and other equipment. Max pressure 70 psi."

GPH: 15, Micron: 10, Ports: 1/4"-18 NPTF", Bowl: Clear, Size: 3.2" D x 3.2" W x 6-1/2" H"

Sold: Each

"Replacement Aluminum Filter Head, 1/4"

Type: 1/4" Aluminum", Replaces: Mercury 89876A3, Yamaha MAR-FLTHD-AL-12

Sold: Each

"Replacement Aluminum Filter Head, 3/8"

Type: 3/8" Aluminum"

Sold: Each

"Replacement SS Filter Head, 1/4"

Type: 1/4" Stainless Steel"
Replaces: Yamaha MAR-FLTHD-SS-12

"Replacement SS Filter Head, 3/8"

Type: 3/8" Stainless Steel", Replaces: Yamaha MAR-FLTHD-SS-12

The lower the micron rating, the finer the filtration. Follow your engine manufacturer's recommendation for fuel filter micron rating.
S = Secondary/Final 2 micron (Brown cap)
T = Primary or Secondary/Final 10 micron (Blue cap)
P = Primary 30 micron (Red cap)

Color: Red, Micron: 30, Fits: 390RC/490R/690R, Case: 6

Sierra fuel water separators remove over 98.8% of emulsified water from your gasoline. All filters flow @ 90 GPH to feed even the hungriest motor.
Clear Bowls: Use for outboard and above deck installations.
Metal Bowls: USCG regulations require the use of flame resistant metal bowls below deck.

Description: Spin-on element w/o Bowl, Replaces: Racor S3214, OMC 771839, Mercury 35-809099

Sold: Each