Generic

Clear insulating cover with label recess for small Blue Sea Systems' labels. Cover insulates all conductive parts, satisfying ABYC/USCG requirements. Tin-plated copper buses and fuse clips give 30 Ampere rating per circuit. Rated for 32 Volts DC, 100 Ampere maximum per block. Accepts ATO and ATC fast acting blade type fuses and plug-in style circuit breakers. Thermoplastic base and polycarbonate cover.

Gang: 12, Fuse: ATO/ATC, Neg Bus: Yes, Size: 3.32'' x 6.47''

Sold: Each

Clear insulating cover with label recess for small Blue Sea Systems' labels. Cover insulates all conductive parts, satisfying ABYC/USCG requirements. Tin-plated copper buses and fuse clips give 30 Ampere rating per circuit. Rated for 32 Volts DC, 100 Ampere maximum per block. Accepts ATO and ATC fast acting blade type fuses and plug-in style circuit breakers. Thermoplastic base and polycarbonate cover.

Gang: 6, Fuse: ATO/ATC, Neg Bus: Yes, Size: 3.32'' x 4.89''

Sold: Each

Clear insulating cover with label recess for small Blue Sea Systems' labels. Cover insulates all conductive parts, satisfying ABYC/USCG requirements. Tin-plated copper buses and fuse clips give 30 Ampere rating per circuit. Rated for 32 Volts DC, 100 Ampere maximum per block. Accepts ATO and ATC fast acting blade type fuses and plug-in style circuit breakers. Thermoplastic base and polycarbonate cover.

Gang: 6, Fuse: ATO/ATC, Neg Bus: No, Size: 3.32'' x 3.65''

Sold: Each

Fuse Block ST Blade 12 12 W/GRD/CVR

Blue Sea Systems Screw Terminal Blade Fuse Blocks have a compact construction that is designed to consolidate branch circuits. This design eliminates the hassle of inline fuses for electronics and other appliances. The available clear insulating cover provides storage for spare fuses, accepts small format labels for identification, and meets ABYC/USCG insulation requirements.

Features:
• Can be used for 24 hour circuits
• Accepts ring or spade type terminals
• 32 VDC
• 30 amps per circuit; 100 amps per block
• ATO/ATC fuses

Fuse Block STblade Bottom 4 circuit Kit

The Blue Sea Systems ST-Blade Battery Terminal Mount Fuse Block Kit is designed to allow easy installation of 4 ATO/ATC fused circuits. It features a ST-Blade battery terminal mount fuse block with 4 screw terminals for securing wire and mounts on the battery terminal stud. It also has a battery positive ground bar with 4 screw terminals.

Features:
• Maximum amperage: 100/Block, 30/Circuit
• Maximum voltage: 32VDC
• Circuits: 4
• Mounting: Clearance for 3/8" stud
• Screw terminal type: #8-32 Screw with captive star lock washer
Included:
• ST-Blade battery terminal mount fuse block
• ATO/ATC 15A Fuse
• (8) Nylon insulated ring terminals
• Battery terminal mount busbar
• Insulating covers

"Solid brass busbar safely carries up to 150A. Two 1/4" -20 diameter brass stud with hex nuts. 8-32 round head screws for attaching wires. Moisture repellent thermoplastic insulator base. 2 mounting holes. Safely carries up to 150 amps."

Gang: 10, Size: 5-3/4" L x 1-1/4" W x 1-1/32" H ", Pack: Clamshell

Sold: Each

Push in cap is made of stamped brass and molded bakelite.

:

Round screw in cap is made of stamped brass and molded bakelite.

A: 7/16", B: 19/32", Amps: 15, Volts: 12

Designed to accept automative style spade-terminal fuses. ATO/ATC.
Bulk packed

Rating: 30A, Gauge: 12, Fuse: 30A

Sold: Each

Round with flush cap, spade terminal.

A: 3/8", B: 1/2", Amps: 15, Volts: 12

Sold: Each

Fuse Holder 3AG Water Resistant 

The Blue Seas Systems 3AG Water Resistant Fuse Holder replaces the fuse holder found in Contura waterproof fuse panels. It will withstand the water exposure normally encountered in above the deck applications; salt spray, rain, hose washdowns, and momentary immersions.

Features:
• Max voltage: 32V DC
• Max amperage: 20 Amperes
• Easy to open
• IP66 protected against powerful water jets
• Mounting hole diameter: 0.50" (12.70mm)

Designed to accept automative style spade-terminal fuses. ATO/ATC.
Bulk packed

Rating: 30A, Gauge: 12, Fuse: 30A

Sold: Each

Fuse Holder w/Push-In Cap

• Thread depth: 1/4"
• Fuse diameter: 19/32"
• Release location: Side
• Fuse size: 1/4" x 1-3/4"
• Stamped brass/molded Bakelite

Fuse Holder Waterproof ATO/ATC

The Blue Sea Systems Waterproof In-Line ATO/ATC Fuse Holder is equipped with 12 AWG pigtails and can be used with ATO or ATC fuses with a 30A maximum amperage.

Fast short circuit response makes this the best choice to protect high amperage electronics equipment such as inverters. 20,000 Amp Interupt Capacity (AIC) UL rated for DC applications under UL189L.

Size: 2.75'' x 1.31'', Amps: 225

Sold: Each

Fast short circuit response makes this the best choice to protect high amperage electronics equipment such as inverters. 20,000 Amp Interupt Capacity (AIC) UL rated for DC applications under UL189L.

Size: 2.75'' x 1.31'', Amps: 250

Sold: Each

Fast short circuit response makes this the best choice to protect high amperage electronics equipment such as inverters. 20,000 Amp Interupt Capacity (AIC) UL rated for DC applications under UL189L.

Size: 2.75'' x 1.31'', Amps: 400

Sold: Each

Tin-plated connector blades for corrosion resistance and visible indication of blown condition. Interrupt capacity is 1000 amps DC and 32 Volts DC maximum.

Size: 1.55'' x .86'', Amps: 30

Sold: Each

Tin-plated connector blades for corrosion resistance and visible indication of blown condition. Interrupt capacity is 1000 amps DC and 32 Volts DC maximum.

Size: 1.55'' x .86'', Amps: 40

Sold: Each

Tin-plated connector blades for corrosion resistance and visible indication of blown condition. Interrupt capacity is 1000 amps DC and 32 Volts DC maximum.

Size: 1.55'' x .86'', Amps: 50

Sold: Each