Generic

"Hubbell's GFCI receptacles can be mounted on any standard 2.50" (63.5) deep box. A feed-thru feature provides protection not only at that receptacle but also at any other receptacle located downstream from it on the same circuit. These devices meet the requirements of The National Electric Code (NEC) and American Boat and Yacht Council Standard and will accept locking fork terminals.
Caution: Ground Fault Receptacles should not be mounted in locations exposed to salt spray nor in the engine room. For GFCI protection of such locations, downstream feeding from an internally located Ground Fault Receptacle is recommended."

Color: Ivory, Rating: 15A, 125V

Sold: Each

"Hubbell's GFCI receptacles can be mounted on any standard 2.50" (63.5) deep box. A feed-thru feature provides protection not only at that receptacle but also at any other receptacle located downstream from it on the same circuit. These devices meet the requirements of The National Electric Code (NEC) and American Boat and Yacht Council Standard and will accept locking fork terminals.
Caution: Ground Fault Receptacles should not be mounted in locations exposed to salt spray nor in the engine room. For GFCI protection of such locations, downstream feeding from an internally located Ground Fault Receptacle is recommended."

Color: White, Rating: 15A, 125V

Sold: Each

The G-Force™ Handle is a replacement for trolling motor release rope technology. This trolling motor replacement release and lift system is a rugged, nylon jacketed stainless steel cable with a large comfortable cushioned grip handle. Fits most models and makes of trolling motors. The G-Force™ Handle comes complete with a hook-n-loop strap to secure to the motor shaft while underway.

Gil Custom Composite - Bullnose Exhaust Tip

Gil custom exhaust tips provide GIl quality at an extremely affordable price. Their body is made of 100% composite material that's impervious to corrosion. Polished stainless bullnose style extension.

• All Composite Body Construction
• Built-in flapper
• Fit all 4" exhaust pipes
• Bullnose style
• Some assembly required.
• SS part and composite base need to bonded with high temp adhesive (included).

Note: sold each.

Gil Custom Composite Exhaust Tip Body

Gil custom exhaust tips provide GIl quality at an extremely affordable price. Their body is made of 100% composite material that's impervious to corrosion. 

• All Composite Contruction
• Built-in flapper
• Fit all 4" exhaust pipes

Note: sold each.

Gil Custom Composite - Bullnose Exhaust Tip

Gil custom exhaust tips provide Gil quality at an extremely affordable price. Their body is made of 100% composite material that's impervious to corrosion.ll-composite straight-cut style extension. Comes with an exterior flapper for added protection

• All Composite Body Construction
• Built-in flapper
• Fit all 4" exhaust pipes
• Straight-cut style

Note: sold each.

Gil Custom Composite - Angle Cut Exhaust Tip

Gil custom exhaust tips provide GIl quality at an extremely affordable price. Their body is made of 100% composite material that's impervious to corrosion. Polished stainless Angle Cut extension.

• All Composite Body Construction
• Built-in flapper
• Fit all 4" exhaust pipes
• Angle Cut SS Sleeve
• SS Sleeve Tip part extends 5.5"
• Some assembly required.
• SS part and composite base need to bonded with high temp adhesive (included).

Note: sold each.

OMC Sterndrive/Cobra
OMC Volvo

• OMC Sterndrive/Cobra


• OMC Volvo

Replaces: Merc 30-60794A4
Volvo 3853807
OMC 983937

Sold: Each

Formed, chrome-plated steel wire drink holders are ideal for boats, cars, and RVs. Gimbaled surface-mounting bracket keeps drinks level to prevent spills. Includes mounting screws.

Size: Large, w/slot for mug handle, includes cooler, Case: 6

Sold: Each

GM 3.0L Water Pump

Application: Late Model 3.0L 4 cylinder GM engines requiring hose fittings, Replaces: Mercruiser: 884727

Sold: Each

Used, a lot of surface rust, square bore carb.

• Available: (1) One
• SOLD AS IS
• NON RETURNABLE

Please study photo carefully, item is sold as shown.

GM LS Series Remote Oil Filter Adapter

• Replaces Moroso Spin-On oil filter adapter on Moroso #'s 20142, 20143 & 20151 oil pans, comes standard on Moroso # 20146 oil pan.
• Ideal when chasis restrictions don't allow the use of block mounted filter or when a larger external filter is desires.
• Billet aluminum construction
• -10 AN "In" and "Out" ports
• Includes mounting hardware and engine block sealing O-Rings

GM LS Series Remote Oil Filter Adapter - 90 Degree

This billet aluminum adapter is designed to install under the pan rail of  LS1 pans and provide inlet and outlet ports for installing lines to a remote oil filter. Adapter features o-ring seals between the pan and the adapter and 1-1/16" -12 AN oil inlet and outlet ports.

• 1/2 NPT Inlet and Outlet 
• Ports are set at 90 Degrees
• Lightweight Billet Design

GM LS Series Remote Side Mount Oil Filter Adapter

Earl's billet side mount oil cooler adapters are the slick way to add an oil cooler to your GM LS or Gen-V LT engine. The slim design of these adapters clear most headers and other components and feature -10 AN male connections. These adapters are black anodized and use O-Ring seals for a leak free installation. Fits OEM & Holley Wet Sump oil pans only (Does not Fit Dry Sump Engines).

• Billet Aluminum w/ Black Anodized Finish
• Includes 0-Ring Seal & Hardware
• (2) 1/8” NPT Accessory Ports
• -10 AN Male Connections
• Available w/ 180 Degree Thermostat
• Add an Earl’s Oil Cooler and AN Plumbing to Complete the Installation

GM LS Series, Rear Sump Swap Oil Pan

Wet Sump, 5 Quart Capacity, 5'5" Deep, 8.5" Wide, 8.375" Long
Engine Application: GM LS Series
Fits: LS Engine Conversions that require a Rear Sump
1/2"-20 drain plug

• Oil pan has a thick precision laser cut steel rail with a durable fabricated steel sump plated with a clear zinc finish
• Fabricated, durable steel construction is more adaptable to add fittings, change finishes and weighs les than cast aluminum construction.
• Clears 4.25" stroke with most steel rods
• Front of the oil pan is 1.813" Deep to the beginning of the 5.5" deep sump.
• The fabricated steel sump is 5.5" Deep, 8.5" Wide, and 8.375" Long
• Removable anti-slosh baffle
• Features a billet aluminum adapter that allows a 13/16" thread Moroso or OEM oil filter to be mounted in the stock location, no need to run a remote oil filter.
• Designed to be used with Moroso 740-24050 Oil Pump Pickup
• Magnetic drain plug and uses a stock dipstick

Size: 3/4" dia. x 3-3/8" L, Plug: N/A-Zinc Only, Thread: 5/8"-11, Material: Zinc

GM Vortec MPI Distributor

Application: 5.0L/5.7L/6.2L Vortek MPI engines (2001 & up), Replaces: Mercruiser 884794A02

Sold: Each

• Removes the tough spots and stains ordinary household cleaners can't


• Removes adhesives & glue, crayon, pen & marker, gum, scuff marks, stickers & decals, asphalt & tar, tree sap, nail polish and more


• Ideal for all kinds of hard surfaces - all metals, glass, brick, wood, concrete, grout, vinyl tops, fiberglass, hand tools, most automotive surfaces, countertops and more

• Removes the tough spots and stains ordinary household cleaners can't


• Removes adhesives & glue, crayon, pen & marker, gum, scuff marks, stickers & decals, asphalt & tar, tree sap, nail polish and more


• Ideal for all kinds of hard surfaces - all metals, glass, brick, wood, concrete, grout, vinyl tops, fiberglass, hand tools, most automotive surfaces, countertops and more

Size: 16 oz, Case: 6

Sold: Each

Cast brass. Chrome finish. Carded.

Finish: Chrome, A: 5-1/16", B: 15/16", C: 3/4", D: 5-5/8", Fastener: #6

Sold: Each

Provides accurate speed over ground readings and heading information all in one attractive package. This product is ideal for all speed applications and is particularly useful for slow and high speeds where traditional speed sensors like pitot tubes and paddlewheels do not perform well. An added advantage is there is nothing in the water to corrode or break.
Features:
Included LCD heading display to show course over ground
Connects to an existing NMEA 0183 GPS device (not included)
Speed accuracy of +/-1 MPH (once moving)
Heading accuracy of +/-1 degree (once moving)
Enhanched illumination: through-dial lighting for excellent readability at night

Cable Length: 4'

Sold: Each