462-158-ST74RBP "Sealed single 6" oval polycarbonate housing/lens with rubber grommet and standard 3 pin pigtail." Description: Light w/Grommet & Pigtail, Pkg.: Polypack, Case: 50 Sold: Each
|
|
462-622-15126101 "Great for boats from 14'-25' long with a swim platform and/or ladder. Can be fitted to transoms with limited mounting space. Blades are electro-polished 12 gauge, 304 stainless steel. Fully submersible electric actuators have plug & play Deutsch connectors. Includes: (2) 12V actuators with 6' leads, (2) 20' actuator extension, (2) trim tab blades, stainless steel mounting hardware. Switch kit sold separately. Minimum transom height - 14.5"." Size: 4" x 12", Finish: Electro-Polished, Volts: 12 Sold: Each
|
|
462-622-15088101 "Great for boats from 14'-25' long with a swim platform and/or ladder. Can be fitted to transoms with limited mounting space. Blades are electro-polished 12 gauge, 304 stainless steel. Fully submersible electric actuators have plug & play Deutsch connectors. Includes: (2) 12V actuators with 6' leads, (2) 20' actuator extension, (2) trim tab blades, stainless steel mounting hardware. Minimum transom height: 13". Switch kit sold separately. Minimum transom height - 13"." Size: 4" x 12", Finish: Electro-Polished, Volts: 12 Sold: Each
|
|
462-622-15052101 "Ideal for boats with a swim platform and/or ladder. They can be fitted to transoms that have a limited mounting area. Blades are 12 gauge, 304 SS with front of blade folded to provide a smooth trailing edge and 1/8" diameter hinge pin. Fast response electric actuators for precise control. All units have Plug and Play connections and are fully submersible.
Kit includes:
- (2) 12-gauge stainless steel blades w/Electro-Polish finish
- (2) actuators with 6' (1.8 m) lead and Deutsch connectors
- (2) 30133-103 20' actuator extension wiring harnesses
- (2) 15085-001 upper mounting brackets with gland seal
- Lower mounting brackets
- Stainless steel mounting hardware
" Kit includes:- (2) 12-gauge stainless steel blades w/Electro-Polish finish
- (2) actuators with 6' (1.8 m) lead and Deutsch connectors
- (2) 30133-103 20' actuator extension wiring harnesses
- (2) 15085-001 upper mounting brackets with gland seal
- Lower mounting brackets
- Stainless steel mounting hardware
Size: 4" x 12", Finish: Standard finish, Volts: 12 Sold: Each
|
|
462-32-1006 Mounting band snaps on any rail, lifeline or stanchion. Snap bottom band around coil of rope, wire or electric cord. Size: 9-1/2" L
|
|
462-126-LLM1 Ideal for tidal areas and exposed moorings. Reduce strain on towline, gear and engine when towing. Easy to fit. Made of EPDM rubber. Resistant to sun, salt, water and ozone. Three strand synthetic rope is recommended for use with Falcon Line-Masters. Length of compensating movement can be varied by number of turns around, the more turns the larger the compensating movement. 5-year warranty. Line Size: 3/8"
|
|
462-126-LLM2 Ideal for tidal areas and exposed moorings. Reduce strain on towline, gear and engine when towing. Easy to fit. Made of EPDM rubber. Resistant to sun, salt, water and ozone. Three strand synthetic rope is recommended for use with Falcon Line-Masters. Length of compensating movement can be varied by number of turns around, the more turns the larger the compensating movement. 5-year warranty. Line Size: 5/8"
|
|
462-1-SA27361P Link Arm Kit OMC/Johnson/Evinrude Description: J/E Link Arm Kit Sold: Each
|
|
|
|
|
160-10-1342-03 Kit #11 - Lip seal back up plate (Qty 1)
|
|
462-639-700115 Fights oxidation to improve conductivity. Penetrates aluminum oxide to maintain current paths. Temperature rated 40°-500°F.
Description: Dielectric Silicone Compound, Size: 1/3 oz.
Sold: Each
|
|
462-244-845 Heavy duty liquid wax. Use where durability, high gloss and lasting protection are paramount. Very easy to use - requires minimum rubbing or buffing. Clear coat safe.
Description: Liquid Insulator Wax, Size: Pint, Case: 12
Sold: Each
|
|
462-79-MDR740 Protects against corrosion. Ideal for battery switches and terminals, bilge pumps and electrical connections. Dielectric, resists moisture and acids. Prevents vibration. Prevents bilge pump failure due to moisture wicking in butt connector on wiring in bilge. Water-based formula for easy cleanup with just water.
Size: 4 oz.
Sold: Each
|
|
462-108-770055 Liquid MareLube™ is designed for valves where access is difficult or convenience is desired. Simply pour Liquid MareLube into the system through the valve tailpipe or hose, and activate the handle of the valve. This is a true Readily Biodegradable and biorenewable liquid lubricant developed for the regular maintenance of marine valves and seacocks. This valve service should be performed several times a season to reduce marine growth and keep seals lubricated. Size: 16oz. Sold: Each
|
|
462-639-765012 Provides low cost watertight cable entries into panels and junction boxes. UL and CSA approved to work with round and flat cable. Resistant to saltwater, gasoline, alcohol, ketones and mineral oil. Safe underwater to 300 ft. (150 PSIG).
Description: Flat, Wire Range: 14/2-12/3, Cable Size: ---
|
|
462-9-1089DP1BLK Black fiber reinforced plastic. Hinged, water resistant. Fits Perko 0931 and 0932.
Size: 2-3/4" x 3-1/4"
Sold: Each
|
|
462-148-10107 "Locks the outboard motor in the forward position while trailering, greatly reducing the damaging effects of road shock. Does not "tie" engine's lower-unit to trailer, eliminating excessive pressure on hydraulic seals and unsightly scuff marks. Small compact mount can be easily stored in just about any boat compartment. Constructed of black powder-coated steel with stainless steel pins."
Fits: Mercury engines 200 OpitMax, 255 OptiMax, 225HP EFI, 250HP EFI
Sold: Each
|
|
160-14-0721-02 Lock Washer
|
|
160-14-0722-01 Lock washer
|
|
160-14-1895-00 Lock washer
|
|
