Generic

Heavy-duty glass envelope for break resistance. Nickel-plated brass prevents corrosion while insuring a positive point of contact.

Fig.: 23, Type: G-4 Halogen, Volts: 24, Watts: 10, Amps: 0.42

Sold: Each

24 Volt actuator for ski boats and tow boats. Includes Deutsch connector. 6' cable and mounting hardware.

• 101 Standard Series: For Standard trim tab, Edge Mount trim tab, Standard Performance tab and 2008 & prior Air Boat kit

• 101 Standard Series: For Standard trim tab, Edge Mount trim tab, Standard Performance tab and 2008 & prior Air Boat kit


• 101 XD Series: For Heavy Duty Performance, XD Performance, High Performance and Super Strong tab kits


• 101 XDS Series: Extreme Duty "short" series. For LS trim Tabs, 2009+ Airboat tabs, and OEM specific kits and limited space applications, it is the shortest actuator we manufacture


• 102 HD Series: Standard actuator for Trolling Tab systems sold from 2000 to present


• 1.25 XDS Series: Actuator for tow boats

Model: 101 Standard, Length: 12-1/8", Stroke: 2.25", Hole: 5/16", Type: TT, Volts: 24

"Enables remote controls to be fitted further from the light than standard cables allow, and are needed to install secondary remote control kits.
For 135 SL, 146SL, 155SL (12 Volt dc), 255SL, 5" (130) and 7" (180) RC models."

Length: 25'

Sold: Each

25' Network Cable

Description: Network Cable, 25'

Sold: Each

Wire your vehicle for permanent installation applications. Includes 25' of 10 ga. positive wire, 10' of black ground wire, 60 amp. circuit breaker, and winch plug.

Fits: 712, 912, 915, T2400, T3200PO, T4000, ST712

Sold: Each

2-5/8" x 9" Cummins Oil Cooler

• Exact replacement oil cooler for Cummins No. 3349303
• Made of copper and bronze with internal tubes and tube sheets made with 90/10 Cupro Nickel
• 1-1/2" O.D.(1) & 1-3/4" O.D.(1) water hose connections with 3/8" NPTF(1) & PH-SEAL-LOK(1) oil connections
• Fully compatible with existing brackets, hoses, and fittings

250 B&M, 420, 8/71 Intercooler Core ONLY

250 B&M, 420, 8/71 SuperChiller Intercooler core. This is a replacement core only! The image shows fully assembled intercooler that this core fits!

250 TBS Intercooler

250TBS SuperChiller Intercooler.If you're looking for a cost effective method of increasing your supercharged engine's output and improving reliability, install a SuperChiller Intercooler. Bolt-on 75 to 150 horsepower. The SuperChiller Intercooler dramatically reduces the air temperature of the intake charge, thereby increasing air density to the combustion chamber. A cooler, denser air/fuel mixture takes up less space inside each cylinder, allowing the mixture to provide an increased intake charge without the risk of detonation.Installation studs and gaskets included.Features hard anodized end caps with 1/2" female NPT fittings. End caps available blank or with Superchiller logo, please specify. Superchiller housing is 4" thick. Anodized aluminum core features 9 water tubes and 24 fins per inch. Not recommended for continuous salt water use. Always flush intercoolers after salt water use.

"Integrated circuit breaker
Works in case of power loss with supplied manual override crank handle
Gloss black painted outer tube and motor assembly, clear zinc inner tube
8.50" Retracted - 28.50" Extended
Limited 1 year warranty"

• Integrated circuit breaker


• Works in case of power loss with supplied manual override crank handle


• Gloss black painted outer tube and motor assembly, clear zinc inner tube


• 8-1/2" Retracted - 28-1/2" Extended


• Limited 1 year warranty

Travel: 18", Max Load: 2,500 lb.

Sold: Each

"The fixed mount jack with drop leg is suited for the heavy-duty applications. This square tube jack fits trailer frames up to 3" x 5". Bolt on style and includes all mounting hardware."

Max Load: 2,500 lbs.

Sold: Each

256 Weiand Intercooler

256 SuperChiller Intercooler, Holley/Weiand. If you're looking for a cost effective method of increasing your supercharged engine's output and improving reliability, install a SuperChiller Intercooler. Bolt-on 75 to 150 horsepower. The SuperChiller Intercooler dramatically reduces the air temperature of the intake charge, thereby increasing air density to the combustion chamber. A cooler, denser air/fuel mixture takes up less space inside each cylinder, allowing the mixture to provide an increased intake charge without the risk of detonation.Installation studs and gaskets included.Features hard anodized end caps with 1/2" female NPT fittings. End caps available blank or with Superchiller logo, please specify. Superchiller housing is 4" thick. Anodized aluminum core features 9 water tubes and 24 fins per inch. Not recommended for continuous salt water use. Always flush intercoolers after salt water use.

"Can be used with all SeaStar systems except BayStar, Capilano and 3-line inboard systems. Includes 2 hoses. ID of 5/16". Not for use with SeaStar Pro systems."

Length: 26', Box: 2

Sold: Box

"Can be used with all SeaStar systems except BayStar, Capilano and 3-line inboard systems. Includes 2 hoses. ID of 5/16". Not for use with SeaStar Pro systems."

Length: 28', Box: 2

Sold: Box

Allows a user to manually steer an auxiliary engine (kicker motor) using most existing SeaStar hydraulic steering systems. Design incorporates a TeleFlex Extreme cable as the linkage between the two engines.

Features:
• Flexible cable allows for adjustable locations of kicker motor
• Allows independent trim/tilt and full steering stroke
• Retro-fittable to most SeaStar Front Mount Cylinders
• 20 hp rating (uses 40 series Xtreme cable)
• Length: 28"

Size: 6" x 22", Color: White, Boat Size: 20'-25', Pack: 2

Sold: Pack

Switch panel that gives full control of your equipment. Just push the button to pump the bilge. Matte black finish panel has an integrated fuse holder and operating light. Fuses included.

Positions: On/Off, Volts: 12 or 24, Size: 3" x 2-1/8" x 1-1/2" D

Bronze and imported. NOT TO BE USED IN POTABLE WATER SYSTEMS.

Size: 2" x 1-1/2"

"Model RP325: End cap 3" for RP33 & RP335
Model RP32: End cap 3-1/4" for RP-8, 10, 12 & 18"

Description: End cap for RP8, RP10, RP12, RP18, Size: 3-1/4", Hole: 5/8", Case: 36

Sold: Each

Formed 316 stainless steel.

A: 5/16", B: 3-1/8", C: 7/16", D: 3/8", Pkg.: Card

Sold: Each

A: 5/16" , B: 3-1/8" , C: 7/16" , D: 3/8" , Pkg.: Bulk