Generic

"Heavy duty aluminum bracket. Black anodized finish. Designed to hold 2 and 4 stroke motors weighing up to 150lbs. 5" high adjustment to accommodate short shaft motors. 8-1/2" setback."

Description: 8-1/2" setback", Setback: 8-1/2"

Sold: Each

Make quick work of anchoring your boat or personal watercraft in shoreline materials including sand, clay, or firm soil.

Material: Zinc Plated Steel or Stainless Steel

Size: 1/2" x 36"
Boat Size: Up to 26'

Sold: Each

"This high security lock is designed for bolt on engines. It is made from polished 300 series marine grade stainless steel, features anti drill protection and includes 2 keys which cannot be duplicated without the 4 digit key code provided. Fits up to 1/2" engine bolts."

Finish: Stainless

Sold: Each

Adjustable outboard motor bracket designed to mount on most swim platforms. Rated for 2- and 4-stroke. Constructed of hard-coat anodized aluminum and can be adjusted to fit most platform heights and motor shaft lengths for optimal prop depth and performance. Constructed of anodized aluminum. Comes complete with transom support bar for weight support torque resistance. Stainless Steel mounting hardware included. (Do not use without the included Panther 550415 safety cable.)

Rating: 15 HP

Sold: Each

These power steering units include just the power units w/o electronics and are designed to work seamlessly with the TrollMaster Pro 3 remote throttle/steering system. They allow you to steer the auxiliary or gas powered trolling motor from anywhere in your boat.
The T4 system will fit every kicker motor with a tilt tube and install in minutes without taking any room away from your transom. It includes a connecting rod with quick disconnects for versatile applications. Requires a minimum 9" clearance between the main engine and kicker motor.
Install anywhere on the transom and include a connecting rod to go between the main engine and the kicker motor with quick disconnects.

Description: T-4 Electro Steer (Does Not Include Remote or Relay Switch Box)

Offers safe, efficient and have high volume evacuation of hazardous vapors on vessels equipped with gasoline powered engines. Satisfy requirements of USCG regulation Title 46, Chapter I, part 183, sub part K for marine ventilation when properly installed and used. BIA type accepted. Also exhausts warm air from galleys and engine rooms, ventilating steam or odors from heads and general marine air circulation. Constructed of tough reinforced plastic housing and one-piece balanced rotor for maximum corrosion resistance. Flex mount blowers have both inlet and outlet ports designed for slip-on flexible duct connections and are ideal when an in-line installation of blower is preferred. May be rotated in bracket to permit installation with discharge port in any direction.

Hose: 3", CFM: 150, Volts: 12, Amps: 6.8, Size: 8" L x 8 3/16" W x 9 1/8" H

Offers safe, efficient and have high volume evacuation of hazardous vapors on vessels equipped with gasoline powered engines. Satisfy requirements of USCG regulation Title 46, Chapter I, part 183, subpart K for marine ventilation when properly installed and used. BIA type accepted. Also exhausts warm air from galleys and engine rooms, ventilating steam or odors from heads and general marine air circulation. Constructed of tough reinforced plastic housing and one-piece balanced rotor for maximum corrosion resistance. Flange mount blowers are generally mounted with discharge port fastened directly to flat external surface minimizing required ducting. Inlet port can be connected with duct hose to area requiring ventilation.

Hose: 3", CFM: 150, Volts: 12, Amps: 10, Size: 8" L x 6 3/4" W x 7 3/4" H

Offers safe, efficient and have high volume evacuation of hazardous vapors on vessels equipped with gasoline powered engines. Satisfy requirements of USCG regulation Title 46, Chapter I, part 183, subpart K for marine ventilation when properly installed and used. BIA type accepted. Also exhausts warm air from galleys and engine rooms, ventilating steam or odors from heads and general marine air circulation. Constructed of tough reinforced plastic housing and one-piece balanced rotor for maximum corrosion resistance. Flangemount blowers are generally mounted with discharge port fastened directly to flat external surface minimizing required ducting. Inlet port can be connected with duct hose to area requiring ventilation.

Hose: 4", CFM: 250, Volts: 12, Amps: 12, Size: 8 3/4" L x 8 3/4" W x 9" H

Offers safe, efficient and have high volume evacuation of hazardous vapors on vessels equipped with gasoline powered engines. Satisfy requirements of USCG regulation Title 46, Chapter I, part 183, sub part K for marine ventilation when properly installed and used. BIA type accepted. Also exhausts warm air from galleys and engine rooms, ventilating steam or odors from heads and general marine air circulation. Constructed of tough reinforced plastic housing and one-piece balanced rotor for maximum corrosion resistance. Flex mount blowers have both inlet and outlet ports designed for slip-on flexible duct connections and are ideal when an in-line installation of blower is preferred. May be rotated in bracket to permit installation with discharge port in any direction.

Hose: 3", CFM: 105, Volts: 12, Amps: 4.3, Size: 6 3/4" L x 5" W x 5 1/2" H

Offers safe, efficient and have high volume evacuation of hazardous vapors on vessels equipped with gasoline powered engines. Satisfy requirements of USCG regulation Title 46, Chapter I, part 183, sub part K for marine ventilation when properly installed and used. BIA type accepted. Also exhausts warm air from galleys and engine rooms, ventilating steam or odors from heads and general marine air circulation. Constructed of tough reinforced plastic housing and one-piece balanced rotor for maximum corrosion resistance. Flex mount blowers have both inlet and outlet ports designed for slip-on flexible duct connections and are ideal when an in-line installation of blower is preferred. May be rotated in bracket to permit installation with discharge port in any direction.

Hose: 4", CFM: 250, Volts: 12, Amps: 12, Size: 8 3/4" L x 9 1/4" W x 9 5/8" H

Offers safe, efficient and have high volume evacuation of hazardous vapors on vessels equipped with gasoline powered engines. Satisfy requirements of USCG regulation Title 46, Chapter I, part 183, sub part K for marine ventilation when properly installed and used. BIA type accepted. Also exhausts warm air from galleys and engine rooms, ventilating steam or odors from heads and general marine air circulation. Constructed of tough reinforced plastic housing and one-piece balanced rotor for maximum corrosion resistance. Flange mount blowers are generally mounted with discharge port fastened directly to flat external surface minimizing required ducting. Inlet port can be connected with duct hose to area requiring ventilation.

Hose: 4", CFM: 250, Volts: 24, Amps: 7.5, Size: 8 3/4" L x 8 3/4" W x 9" H

Manual demand pump for use with an electric faucet. Pump can run dry without damage and is designed for intermittent usage. Self primes up to 4' and meets USCG electrical requirements.

Description: w/o Press. Switch, GPM: 1.1, Ports: 3/8" Hose Barb", PSI: 35, Volts: 12, Amps: 1.9

Sold: Each

Par Presure Switch Kit

Description: Pressure Switch, Fits: 368001000 & 369001000

Sold: Pack

Made of stainless steel and fits most popular fender sizes. The fender holders and two styles of connectors are sold separately, so you can custom configure your fender storage system without having to buy extra hardware you won't be using.

Description: Parallel Connector, Qty: 1 pr.

Sold: Pack

"The PFF5510 gasoline fuel filter/water separator replaces standard fuel filters. It fits these popular engine applications with it's 11/16"-16 center threads and features 10 micron Aquabloc^® II media to outperform other gasoline fuel filters in inboard or outboard, two or four cycle applications. Performance exceeds all OEM requirements, and is suitable for all low or high pressure injection systems. Provides a durable, high performance filter element that is treated inside and out with a highly corrosion resistant coating to eliminate rust-through."

Micron: 10, Application: Mercury, Mercruiser, Yamaha, Suzuki, Honda and Tohatsu, Size: 3.6" dia. x 4.2"H", Case: 12

Sold: Each

"Multi-outlet water pressure pump serves 2 or more 1/2" outlets at any one time. Threaded ports simplify both installation and removal for routine service. Self priming up to 10 ft. Four piston diaphragm sealed for smooth and quiet operation. Diaphragm design allows for extended dry running. Thermal overload protection. Complete with Pumpgard™ strainer."

GPM: 2.3, Volts: 12

Sold: Each

PC-24U Power Cable

Model: PC-24U, Description: Power Cable

Sold: Each

DVA stands for Direct Voltage Adapter, which is used to measure peak AC voltage. This type of measurement of AC voltage takes the absolute peak or highest value of the fluctuating AC voltage signal. Peak readings will be substantially higher than standard or RMS AC values and are typically used when testing marine CD (capacitor discharge) ignition systems due to their high variance in frequency as RPM increases and decreases. In order for a digital meter to read peak voltage, one will need a DVA adapte. Using a DVA adapter, a digital meter must be set to its DC voltage scale. Peak AC voltage is the measurement, but the DVA adapter has a built-in bridge rectifier, which converts AC to DC. The DC voltage setting on a digital meter is required to accurately read DVA.

:

Sold: Each

Description: Stainless, A: 4", B: 1/2", C: 3/8", D: 3/4"

Size: 1/2" dia. x 2" L, Material: Zinc