Generic

O-Ring, Inlet/Outlet Block

O-Ring, Sea Strainer Lid

Note: Replacement part for 620-913245 sea strainer and the 420-913222 sea strainer.

These all NEW replacement alternators meet OEM specs and meet or exceed OEM output for guaranteed performance. Fans, pulleys and hardware are plated to resist corrosion and special marine flame arrestor screens eliminate open sparks which can cause explosions and fire. Wiring harnesses are supplied as required by application for ease of installation. All alternators are fully backed by the Sierra warranty.
See Sierra's catalog for current application information.

Type: New, Fits: Mercury/Denso, OEM #: 834832, 834832T2, 857006A3/ 101211-3460

Sold: Each

"Designed to lock the outboard onto the transom, simply replace one of the mounting nuts with a McGard locking nut. A free spinning collar turns if attacked by gripping tools, protecting against theft and inconvenience. (74049 fits most of the motors listed and will fit other small outboards with a 5/16" hole in the transom bracket for mounting the motor.)"

Description: 1/2-13 Johnson/Evinrude 40+ hp (2-stroke), Finish: Stainless

Sold: Each

"Designed to lock the outboard onto the transom, simply replace one of the mounting nuts with a McGard locking nut. A free spinning collar turns if attacked by gripping tools, protecting against theft and inconvenience. (74049 fits most of the motors listed and will fit other small outboards with a 5/16" hole in the transom bracket for mounting the motor.)"

Description: 1/2-20 Merc/Mariner 40+ hp (2-stroke), Merc 25+ hp (4-stroke), Suzuki 150-300 hp, Finish: Stainless

Sold: Each

"Designed to lock the outboard onto the transom, simply replace one of the mounting nuts with a McGard locking nut. A free spinning collar turns if attacked by gripping tools, protecting against theft and inconvenience. (74049 fits most of the motors listed and will fit other small outboards with a 5/16" hole in the transom bracket for mounting the motor.)"

Description: M12 x 1.25 Yamaha 40+ hp (2-stroke), 30+ hp (4-stroke), Honda 40+ hp, Suzuki 25-140 hp (2005 & newer), Finish: Stainless

Sold: Each

Mounts over outboard mounting clamp handles. Made of heavy gauge steel with long lasting black powder-coat finish for years of protection against rust and corrosion. Foam filler insert reduces noise and vibration. Mounts on most outboard motors.

Finish: Black Powder Coat

Sold: Each

Fits over trim rams
Supports outboard while trailering
Takes the pressure off of hydraulic system
Most outboards 150 hp and up
Strong aluminum tubing with molded ends
Safe for salt or fresh water

• Fits over trim rams


• Supports outboard while trailering


• Takes the pressure off of hydraulic system


• Most outboards 150 hp and up


• Strong aluminum tubing with molded ends


• Safe for salt or fresh water

Description: 0, Pack: 1 pr.

Sold: Pack

"For Mercury/Mariner-Fits:
'86-96/6-15 HP
'80-'03/18-25 HP
2 1/2" motor casing
10-tooth drive gear"

Description: Brush holder assembly

Sold: Each

For Mercury-Fits:
50-60 HP, 3-cyl
1991-1996 45 HP Jet
10-tooth drive gear

Type: New

Sold: Each

FOR O.M.C. - Fits:
1989-up 25, 40, 50, 2 cyl.
1990-up 48-50 HP
9 tooth drive gear

• 1989-up 25, 40, 50, 2 cyl.


• 1990-up 48-50 HP


• 9 tooth drive gear

Type: New

Sold: Each

1985-Up
10 tooth drive gear
Replaces OMC 393570, 585060, 583285

• 1985-Up


• 10 tooth drive gear


• Replaces OMC 393570, 585060, 583285

Description: New, Type: New

Sold: Each

Replaces: OMC 386591, 392133, & 585061, 586278, 385401, 174942 and 175019
11-tooth drive gear

• Replaces: OMC 386591, 392133, & 585061, 586278, 385401, 174942 and 175019


• 11-tooth drive gear

Type: New

Sold: Each

Replaces: Mercury 50-57465A1, 50-72467
10-tooth drive gear

• Replaces: Mercury 50-57465A1, 50-72467


• 10-tooth drive gear

Type: New

Sold: Each

For Mercury/Mariner-Fits:
40-50 HP
10-tooth drive gear

Type: New

Sold: Each

Replaces: Merc 50-79472, 50-77141, 50-44415, 50-7942-1, 5079472T2
8-tooth drive gear

• Replaces: Merc 50-79472, 50-77141, 50-44415, 50-7942-1, 5079472T2


• 8-tooth drive gear

Type: New

Sold: Each

CHRYSLER/FORCE - Fits:

• 35-50 HP


• 11 tooth drive gear

• 35-50 HP


• 11 tooth drive gear

Type: New

Sold: Each

9-tooth drive gear
Replaces: OMC 384163, 387684, 389275, 585063,
& 586280

• 9-tooth drive gear


• Replaces: OMC 384163, 387684, 389275, 585063,


• & 586280

Type: New

Sold: Each

Replaces: Chrysler 50-F616955-1, F616955-1
Force 480955, 490955, 50-819085, 50-853869, 616955, 50-853869, 50-853869T, 50-898265002
9-tooth drive gear

• Replaces: Chrysler 50-F616955-1, F616955-1


• Force 480955, 490955, 50-819085, 50-853869, 616955, 50-853869, 50-853869T, 50-898265002


• 9-tooth drive gear

Type: New

Sold: Each

FORCE - Fits:

• 1996-1999 40-50 HP


• 13 tooth drive gear

• 1996-1999 40-50 HP


• 13 tooth drive gear

Type: New

Sold: Each