Generic

These power steering units include just the power units w/o electronics and are designed to work seamlessly with the TrollMaster Pro 3 remote throttle/steering system. They allow you to steer the auxiliary or gas powered trolling motor from anywhere in your boat.

Description: Electro Steer (Does Not Include Remote or Relay Switch Box)

Made from heavy duty 713 cast aluminum, chromate dipped and black powder coated. Will add support for your transom when mounting your main or auxiliary motors.

Size: 15"L x 2 1/8"W x 1/2"D"

Sold: Each

• Heavy carbon steel design


• Fits over mounting clamp handles


• Recessed solid brass lock


• Noise dampeners reduce rattle

• Heavy carbon steel design


• Fits over mounting clamp handles


• Recessed solid brass lock


• Noise dampeners reduce rattle

Finish: Black Powder Coat, Case: 12

Sold: Each

• Heavy carbon steel design


• Fits over mounting clamp handles


• Recessed solid brass lock


• Noise dampeners reduce rattle

Finish: Fatal Flight Camo Powder Coat, Case: 12

Sold: Each

Easy to use for do-it-yourself applications, but heavy duty construction will stand up for shop use or mobile service professionals. A built-in check valve allows easy release of displaced air and the decompression valve releases negative pressure. See-through container for quick reference and a built in pour spout for no-mess disposal. Suitable for engine oil, gear lube, brake fluid, coolant, etc.
Not for use with flammable or corrosive products.

Description: Manual, Capacity: 6.5L

Sold: Each

Easy to use for do-it-yourself applications, but heavy duty construction will stand up for shop use or mobile service professionals. A built-in check valve allows easy release of displaced air and the decompression valve releases negative pressure. See-through container for quick reference and a built in pour spout for no-mess disposal. Suitable for engine oil, gear lube, brake fluid, coolant, etc.
Not for use with flammable or corrosive products.

Description: Manual, Capacity: 15L

Sold: Each

"Heavy duty aluminum bracket. Black anodized finish. Designed to hold 2 and 4 stroke motors weighing up to 150lbs. 5" high adjustment to accommodate short shaft motors. 8-1/2" setback."

Description: 8-1/2" setback", Setback: 8-1/2"

Sold: Each

Make quick work of anchoring your boat or personal watercraft in shoreline materials including sand, clay, or firm soil.

Material: Zinc Plated Steel or Stainless Steel

Size: 1/2" x 36"
Boat Size: Up to 26'

Sold: Each

"This high security lock is designed for bolt on engines. It is made from polished 300 series marine grade stainless steel, features anti drill protection and includes 2 keys which cannot be duplicated without the 4 digit key code provided. Fits up to 1/2" engine bolts."

Finish: Stainless

Sold: Each

Adjustable outboard motor bracket designed to mount on most swim platforms. Rated for 2- and 4-stroke. Constructed of hard-coat anodized aluminum and can be adjusted to fit most platform heights and motor shaft lengths for optimal prop depth and performance. Constructed of anodized aluminum. Comes complete with transom support bar for weight support torque resistance. Stainless Steel mounting hardware included. (Do not use without the included Panther 550415 safety cable.)

Rating: 15 HP

Sold: Each

These power steering units include just the power units w/o electronics and are designed to work seamlessly with the TrollMaster Pro 3 remote throttle/steering system. They allow you to steer the auxiliary or gas powered trolling motor from anywhere in your boat.
The T4 system will fit every kicker motor with a tilt tube and install in minutes without taking any room away from your transom. It includes a connecting rod with quick disconnects for versatile applications. Requires a minimum 9" clearance between the main engine and kicker motor.
Install anywhere on the transom and include a connecting rod to go between the main engine and the kicker motor with quick disconnects.

Description: T-4 Electro Steer (Does Not Include Remote or Relay Switch Box)

Offers safe, efficient and have high volume evacuation of hazardous vapors on vessels equipped with gasoline powered engines. Satisfy requirements of USCG regulation Title 46, Chapter I, part 183, subpart K for marine ventilation when properly installed and used. BIA type accepted. Also exhausts warm air from galleys and engine rooms, ventilating steam or odors from heads and general marine air circulation. Constructed of tough reinforced plastic housing and one-piece balanced rotor for maximum corrosion resistance. Flangemount blowers are generally mounted with discharge port fastened directly to flat external surface minimizing required ducting. Inlet port can be connected with duct hose to area requiring ventilation.
Note: Is not ignition protected and is not intended for bilge ventilation on vessels with gasoline engines.

Hose: 3", CFM: 100, Volts: 115 AC, Amps: 0.6, Size: 7" L x 6 5/8" W x 7 5/8" H

Offers safe, efficient and have high volume evacuation of hazardous vapors on vessels equipped with gasoline powered engines. Satisfy requirements of USCG regulation Title 46, Chapter I, part 183, sub part K for marine ventilation when properly installed and used. BIA type accepted. Also exhausts warm air from galleys and engine rooms, ventilating steam or odors from heads and general marine air circulation. Constructed of tough reinforced plastic housing and one-piece balanced rotor for maximum corrosion resistance. Flex mount blowers have both inlet and outlet ports designed for slip-on flexible duct connections and are ideal when an in-line installation of blower is preferred. May be rotated in bracket to permit installation with discharge port in any direction.

Hose: 3", CFM: 150, Volts: 12, Amps: 6.8, Size: 8" L x 8 3/16" W x 9 1/8" H

Offers safe, efficient and have high volume evacuation of hazardous vapors on vessels equipped with gasoline powered engines. Satisfy requirements of USCG regulation Title 46, Chapter I, part 183, subpart K for marine ventilation when properly installed and used. BIA type accepted. Also exhausts warm air from galleys and engine rooms, ventilating steam or odors from heads and general marine air circulation. Constructed of tough reinforced plastic housing and one-piece balanced rotor for maximum corrosion resistance. Flange mount blowers are generally mounted with discharge port fastened directly to flat external surface minimizing required ducting. Inlet port can be connected with duct hose to area requiring ventilation.

Hose: 3", CFM: 150, Volts: 12, Amps: 10, Size: 8" L x 6 3/4" W x 7 3/4" H

Offers safe, efficient and have high volume evacuation of hazardous vapors on vessels equipped with gasoline powered engines. Satisfy requirements of USCG regulation Title 46, Chapter I, part 183, subpart K for marine ventilation when properly installed and used. BIA type accepted. Also exhausts warm air from galleys and engine rooms, ventilating steam or odors from heads and general marine air circulation. Constructed of tough reinforced plastic housing and one-piece balanced rotor for maximum corrosion resistance. Flangemount blowers are generally mounted with discharge port fastened directly to flat external surface minimizing required ducting. Inlet port can be connected with duct hose to area requiring ventilation.

Hose: 4", CFM: 250, Volts: 12, Amps: 12, Size: 8 3/4" L x 8 3/4" W x 9" H

Offers safe, efficient and have high volume evacuation of hazardous vapors on vessels equipped with gasoline powered engines. Satisfy requirements of USCG regulation Title 46, Chapter I, part 183, sub part K for marine ventilation when properly installed and used. BIA type accepted. Also exhausts warm air from galleys and engine rooms, ventilating steam or odors from heads and general marine air circulation. Constructed of tough reinforced plastic housing and one-piece balanced rotor for maximum corrosion resistance. Flex mount blowers have both inlet and outlet ports designed for slip-on flexible duct connections and are ideal when an in-line installation of blower is preferred. May be rotated in bracket to permit installation with discharge port in any direction.

Hose: 3", CFM: 105, Volts: 12, Amps: 4.3, Size: 6 3/4" L x 5" W x 5 1/2" H

Offers safe, efficient and have high volume evacuation of hazardous vapors on vessels equipped with gasoline powered engines. Satisfy requirements of USCG regulation Title 46, Chapter I, part 183, sub part K for marine ventilation when properly installed and used. BIA type accepted. Also exhausts warm air from galleys and engine rooms, ventilating steam or odors from heads and general marine air circulation. Constructed of tough reinforced plastic housing and one-piece balanced rotor for maximum corrosion resistance. Flex mount blowers have both inlet and outlet ports designed for slip-on flexible duct connections and are ideal when an in-line installation of blower is preferred. May be rotated in bracket to permit installation with discharge port in any direction.

Hose: 4", CFM: 250, Volts: 12, Amps: 12, Size: 8 3/4" L x 9 1/4" W x 9 5/8" H

Offers safe, efficient and have high volume evacuation of hazardous vapors on vessels equipped with gasoline powered engines. Satisfy requirements of USCG regulation Title 46, Chapter I, part 183, sub part K for marine ventilation when properly installed and used. BIA type accepted. Also exhausts warm air from galleys and engine rooms, ventilating steam or odors from heads and general marine air circulation. Constructed of tough reinforced plastic housing and one-piece balanced rotor for maximum corrosion resistance. Flange mount blowers are generally mounted with discharge port fastened directly to flat external surface minimizing required ducting. Inlet port can be connected with duct hose to area requiring ventilation.

Hose: 4", CFM: 250, Volts: 24, Amps: 7.5, Size: 8 3/4" L x 8 3/4" W x 9" H

Par 5 12V Sealed Beam Replacement Bulb

Description: Replacement Sealed Beam, 100/50,000 CP, Fits: 620223002, 620264002,
620404002

Sold: Each

Par 7 12V Sealed Beam Replacement Bulb

Description: Repl. Sealed Beam, 200/500,000CP, Fits: 7" dia. 620404002"

Sold: Each