462-354-3243601 Injection molded nylon.
Description: Retainer Spacer, Size: 1-1/8" L x 3/4" W ", Pack: 1 pr.
Sold: Pack
|
|
160-14-1269-16 Retaining Bolt
|
|
462-9-0537DP "For deck plates. Stainless steel cable and fittings with 1-3/8" stainless steel ring and self tapping screw."
Size: 7"
Sold: Each
|
|
160-14-0801-05 Retaining Ring
|
|
462-379-00RSS1100P Cast bronze with slide out removable screens. Screen: Brass, Size: 12-3/4" L x 5-7/8" W x 2-1/8" H", Max Thru-Hull: 3" Sold: Each
|
|
462-379-00RSS655P Cast bronze with slide out removable screens. Screen: Brass, Size: 10-5/16" L x 4-5/8" W x 1-3/4" H", Max Thru-Hull: 2" Sold: Each
|
|
462-379-2349SP Cast bronze with slide out removable screens. Screen: Stainless, Size: 6-5/8" L x 3-3/4" W x 1-1/16" H", Max Thru-Hull: 1-1/4" Sold: Each
|
|
462-379-2352SP Cast bronze with slide out removable screens. Screen: Stainless, Size: 13-15/16" L x 7-1/16" W x 2-3/16" H", Max Thru-Hull: 4" Sold: Each
|
|
462-639-199286 A re-usable cable tie that offers the heavy-duty tensile strength you need. Easier than a twist tie, more versatile than a cable tie, and stronger than hook and loop fasteners. - Releaseable: Use & re-use. Beads lock and release through key-hole slots
- Secure: Bundle and secure with double lock through 2 convenient keyhole slots to bind, hook, and secure
- Flexible: Bundle and create a loop to hang
Length: 8", Max Dia.: 2", Tensile Strength: 70 lb, Pack: 15 - Releaseable: Use & re-use. Beads lock and release through key-hole slots
- Secure: Bundle and secure with double lock through 2 convenient keyhole slots to bind, hook, and secure
- Flexible: Bundle and create a loop to hang
A re-usable cable tie that offers the heavy-duty tensile strength you need. Easier than a twist tie, more versatile than a cable tie, and stronger than hook and loop fasteners.
|
|
160-52-0242-05 Reverse Gate No.4415
|
|
160-52-0313-09 Reverse Gate (Pull to open) 5509
|
|
160-52-0280-08 Reverse Gate Pivot Pin
|
|
615-160-52-0237-02 Reverse Gate Pivot Pin
- Available: (213) Two Hundred Thirteen
- Condition: New
|
|
462-69-RY504230 The special Reverse "Y" Adapter features special power isolation circuitry so if one plug is connected to a receptacle, the second plug is isolated so no power flows through it. It provides 50A 125/250V power from 2 30A 125V receptacles. Female end has a sealing collar system.Note: Reverse "Y" will NOT work with 50A, 125V, 3-wire inlets. Power is provided in both circuits to the 4-wire inlet, but the dock side receptacles limit the current in each circuit to 30A. The two 30A 125V receptacles must be supplied from a single power source providing from 208V to 250V between them for proper operation. Female (Boat): 50A 125/250V, Male (Dock): (2) 30A 125V
|
|
462-6-186801000 Ideal for transferring diesel fuel. Self priming to about three feet and can pump a discharge head up to twenty feet. With an integral on/off reversing switch, it is ideal for moving fuel between tanks. Pump head can be rotated in 90° increments on motor. USCG approved for ignition protection. NOT TO BE USED IN POTABLE WATER SYSTEMS. GPM: 5, Ports: 1/2" NPT Int./1" Ext. Barb", Volts: 12, Amps: 8 Sold: Each
|
|
462-390-41606 RF RGB Controller with Remote 12V
Description: RF RGB Controller with Remote 12V
Sold: Each
|
|
462-232-RFK1CPDP These components provide an excellent system to protect cables and wiring from dirt, abrasion, sun and water. The rigging flange serves to connect the rigging hose from the engine to the boat. The flange is internally threaded to retain the rigging hose and to make rigging adjustments easy. The back side of the flange is textured to allow inverted mounting. The rigging hose is durable, flexible, and kink resistant and is commonly found on many new boats.
Description: Flange/Hose Kit, Size: 2" x 4', Color: Chrome/Black
Click here for more premium rigging hose and flanges!
|
|
462-232-RF2DP These components provide an excellent system to protect cables and wiring from dirt, abrasion, sun and water. The rigging flange serves to connect the rigging hose from the engine to the boat. The flange is internally threaded to retain the rigging hose and to make rigging adjustments easy. The back side of the flange is textured to allow inverted mounting. The rigging hose is durable, flexible, and kink resistant and is commonly found on many new boats. Description: Flange, Size: 2'', Color: White
|
|
462-232-RF251DP These components provide an excellent system to protect cables and wiring from dirt, abrasion, sun and water. The rigging flange serves to connect the rigging hose from the engine to the boat. The flange is internally threaded to retain the rigging hose and to make rigging adjustments easy. The back side of the flange is textured to allow inverted mounting. The rigging hose is durable, flexible, and kink resistant and is commonly found on many new boats. Description: Flange , Size: 2-1/2'', Color: Black
|
|
462-354-4293281 "Leads have one red and one black 12" lead with right angle .250" push-on connector and one .250" male spade connector. Tin plated copper/injection molded nylon." Description: 18 Gauge, Length: 12" Sold: Pack
|
|
