464-281901-1 SS Rectangular Base 90° 1"
The Seadog Rectangular Base Rail Fittings have an investment cast 316 stainless steel construction.
- 1" Tube O.D.
- Base: 1-7/8" x 3-3/16"
- Fastener: 1/4" FH
|
|
464-281900-1 SS Rectangular Base 90° 7/8"
The Seadog Rectangular Base Rail Fittings have an investment cast 316 stainless steel construction.
- 7/8" Tube O.D.
- Base: 1-7/8" x 3-3/16"
|
|
464-280600-1 SS Round Base 60° 7/8"
The Seadog Round Base Rail Fittings have an investment cast 316 stainless steel construction
- 7/8" Tube O.D.
- Base: 2-5/8"
- Fastener: #10 FH
|
|
462-354-0602001 316 stainless steel.
Length: 5", Fits: 3/4" Line", Fastener: #10FH
Sold: Each
|
|
462-1-HF6009 "These fittings fit updated Seastar cylinders and all helm pump to use O-Ring (ORB) type fittings. Before the update all Seastar Solutions helms used NPT fittings. These 316 stainless steel fittings will simplify the installation process and will allow for simple reorientation of fittings after installation. New ORB type helms are clearly marked with "DO NOT USE NPT Fitting". Cylinder Part Numbers ending in "-3" are the new updated cylinder models that use these ORB fittings." Description: Straight ORB fitting, Fits: -3 SeaStar and BayStar helm pumps, Bag: 2 Sold: Pack
|
|
137-9383 SS Straight Shuttle Valve Fitting -6 Male X 14MM X 1.25MM
Replacement fitting used in Mayfair steering kits.
|
|
137-9384 SS Straight Shuttle Valve Fitting -6 Male X 16MM X 1.50MM
Replacement fitting used in Mayfair steering kits.
|
|
137-9382 SS Straight Shuttle Valve Fittings
This is a -6 AN fitting kit for the Mercury Brazil Shuttle Valve to allow your to use -6 AN aftermarket hose to your power steering pump.
|
|
462-354-182106 Investment cast 316 stainless steel. Size: 1/4", Length: 2-9/16", Eye: 9/16" dia."
|
|
462-354-182110 Investment cast 316 stainless steel. Size: 3/8", Length: 4-5/8", Eye: 7/8" dia."
|
|
462-354-182108 Investment cast 316 stainless steel. Size: 5/16", Length: 3-5/8", Eye: 3/4" dia."
|
|
462-1-HF6006 "These fittings fit updated Seastar cylinders and all helm pump to use O-Ring (ORB) type fittings. Before the update all Seastar Solutions helms used NPT fittings. These 316 stainless steel fittings will simplify the installation process and will allow for simple reorientation of fittings after installation. New ORB type helms are clearly marked with "DO NOT USE NPT Fitting". Cylinder Part Numbers ending in "-3" are the new updated cylinder models that use these ORB fittings." Description: Vertical Tee , Fits: -3 SeaStar steering cylinders, Bag: 2 Sold: Pack
|
|
462-167-5215CX "End-fed 1/2 wave. A favorite with sailboat owners, this light weight, low profile, stainless steel antenna was specially designed for masthead mounting. Hermetically sealed, tin-plated copper wire coil. Stainless steel body and whip. SO-239 connector. Mount: stainless steel "L" bracket supplied." Length: 36", Description: w/60' Cable
|
|
462-167-5215 "End-fed 1/2 wave. A favorite with sailboat owners, this light weight, low profile, stainless steel antenna was specially designed for masthead mounting. Hermetically sealed, tin-plated copper wire coil. Stainless steel body and whip. SO-239 connector. Mount: stainless steel "L" bracket supplied." Length: 36", Description: w/o Cable
|
|
462-218-S1W Elongated in shape, allowing it to sit higher in the water than round buoys, making it more visible during times of strong currents or waves. Ideal for use as a second trailer buoy, a marker buoy for small lobster and crab pots, or a fender for boats up to 24 feet. Multiple ribbed reinforced ropehold for added strength. Size: 6" x 15-1/2", Color: White, Case: 10
|
|

464-5025 ST Blade Fuse Block - 6 Circuits with Negative Bus and Cover
The ST Blade Fuse Block can offer a space saving and cost effective solution to adding circuit protection when there are limited available circuit breakers on the distribution panel. A single circuit breaker on a distribution panel can provide the circuit protection for the feed wire to the ST Blade Fuse Block. This is frequently done for electronics that each have their own ON-OFF switch and don’t require the switching offered by a circuit breaker. The 6 or 12 position ST Blade Fuse Block then provides a consolidated location for fuses for each of the electronics.
- Consolidates branch circuits and in-line fuses
- Positive distribution bus with #10-32 stud
- Can be used for 24-hour circuits
- Models available with or without a cover
- Cover satisfies ABYC/USCG requirements for insulation, incorporates an easy to open push button latch providing easy access to fuses, storage for two spare fuses, and label recesses that accept Blue Sea Systems" Small Format Labels for circuit identification
- Fuse blocks with covers include 20 write-on circuit labels
- Tin-plated copper buses and fuse clips
- Accepts ring or snap fork type terminals
- Accepts ATO® and ATC® fast acting blade fuses
- Fuses sold separately
|
|
462-661-5035 Compact ATO®/ATC® fuse block consolidates branch circuits and eliminates the tangle of in-line fuses. Includes a clear insulating cover with label recesses. Uses Blue Sea small format labels and offers storage for one fuse, satisfies ABYC/USCG insulation requirements. Independent circuits allow some 24-hour and some switched circuits in the same block. Tin-plated copper buses and fuse clips. 32 Volts maximum.
Amps: 30, Fuse: ATO or ATC
Sold: Each
|
|
462-354-2702001 316 stainless steel. Packed one per card.
Material: 316 Stainless, Pin: 1/4" Bolt", Base: 3/4" x 2-1/4", Fastener: #10
Sold: Each
|
|
462-354-2702101 316 stainless steel. Packed one per card.
Material: 316 Stainless, Pin: 1/4" Removable Pin", Base: 3/4" x 2-1/4", Fastener: #10
Sold: Each
|
|
462-354-0800331 "Machined AISI 304 stainless steel bow eye comes with finished nuts instead of a crimped ring found on most other bow eyes. Thread is 3/8" NC."
A: 3/8", B: 2-1/2", C: 1-1/16", D: 3-15/16", E: 1-7/16"
Sold: Each
|
|