462-32-41182 Tuff End™ fenders are for heavy duty marine applications. Constructed from the same flexible, resilient vinyl as our Super Gard, Big B, and Hull Gard fenders, the end in each Tuff End is injection molded for extra strength and reliability. Tuff Ends are designed to perform under the most demanding conditions. Tuff End™ fenders feature seamless construction, the strongest in the industry! Size: 6" x 25", Color: Blue, Boat Size: Up to 30', Case: 12
|
|
462-32-41185 Tuff End™ fenders are for heavy duty marine applications. Constructed from the same flexible, resilient vinyl as our Super Gard, Big B, and Hull Gard fenders, the end in each Tuff End is injection molded for extra strength and reliability. Tuff Ends are designed to perform under the most demanding conditions. Tuff End™ fenders feature seamless construction, the strongest in the industry! Size: 8" x 27", Color: Blue, Boat Size: 25'- 40', Case: 8
|
|
462-32-41194 Tuff End™ fenders are for heavy duty marine applications. Constructed from the same flexible, resilient vinyl as our Super Gard, Big B, and Hull Gard fenders, the end in each Tuff End is injection molded for extra strength and reliability. Tuff Ends are designed to perform under the most demanding conditions. Tuff End™ fenders feature seamless construction, the strongest in the industry! Size: 24" x 57", Color: Blue, Boat Size: 80'- 100', Case: 1
|
|
462-32-1185 Solid vinyl ends for extra strength. Dual purpose bivalve construction. Inflate with hand pump and football-type pin or simply remove screw-in tri-valve and use foot pump or similar high pressure device. Removal also allows rapid deflation. Recommended inflation is 2 PSI. High performance and looks great. Size: 8" x 27", Color: White, Boat Size: 25'- 40', Case: 8
|
|
462-32-1188 Solid vinyl ends for extra strength. Dual purpose bivalve construction. Inflate with hand pump and football-type pin or simply remove screw-in tri-valve and use foot pump or similar high pressure device. Removal also allows rapid deflation. Recommended inflation is 2 PSI. High performance and looks great. Size: 10" x 30", Color: White, Boat Size: 40'- 50', Case: 5
|
|
462-32-1191 Solid vinyl ends for extra strength. Dual purpose bivalve construction. Inflate with hand pump and football-type pin or simply remove screw-in tri-valve and use foot pump or similar high pressure device. Removal also allows rapid deflation. Recommended inflation is 2 PSI. High performance and looks great. Size: 12" x 35", Color: White, Boat Size: 50'- 60', Case: 4
|
|
462-32-1193 Solid vinyl ends for extra strength. Dual purpose bivalve construction. Inflate with hand pump and football-type pin or simply remove screw-in tri-valve and use foot pump or similar high pressure device. Removal also allows rapid deflation. Recommended inflation is 2 PSI. High performance and looks great. Size: 19" x 50", Color: White, Boat Size: 70'- 80', Case: 2
|
|
462-32-1205 Mounts vertically. Hardware not included.
Description: Chrome Zamak, Pack: 2
Sold: Pack
|
|
462-70-T20 Tear Drop Hull Zinc Length: 3-1/2", Material: Zinc
|
|
462-70-T21 Tear Drop Hull Zinc Length: 5-1/4", Material: Zinc
|
|
137-9368 Replacement fitting used in Mayfair steering kits.
Tee -6 JIC Female To -6 JIC Male Stainless Steel
|
|
462-232-TEE350DP Black. Hose: 1-1/2" x 1-1/8" x 1-1/2"
|
|
462-232-TEE250DP Black. Hose: 1-1/8" x 3/4" x 1-1/8"
|
|
462-1-HF5536 "All SeaStar manual hydraulic steering systems utilize the same style of fittings for all applications. These are 3/8" compression fittings which utilize a 9/16"-24 extra fine thread." Type: Tee Fitting, Material: Aluminum, Bag: 3 Sold: Bag
|
|
462-1-HF5533 "All SeaStar manual hydraulic steering systems utilize the same style of fittings for all applications. These are 3/8" compression fittings which utilize a 9/16"-24 extra fine thread." Type: Tee Fitting, Material: Brass, Bag: 3 Sold: Bag
|
|
137-9346 Replacement fitting used in Mayfair steering kits.
Size: -6 Male x -6 Male x 1/4" NPT
|
|
462-1-HF5530 "All SeaStar manual hydraulic steering systems utilize the same style of fittings for all applications. These are 3/8" compression fittings which utilize a 9/16"-24 extra fine thread." Type: Tee Fitting, Material: Brass, Bag: 3 Sold: Bag
|
|
This Part has options, please click the button below to order.
MULTIPLE PART NUMBER OPTIONS. CLICK PART OPTIONS FOR MORE INFO -> Traditional SeaStar Solutions (formerly Teleflex Marine) mechanical rack steering is still the choice for sterndrives, inboards and other power-assisted applications. It's just right for power-steered boats in which No-Feedback Systems are not Required.
The Back Mount Rack Steering System features the precision and comfort of four turns lock-to-lock with a cable and helm that install easily from behind the dash. In single cable configurations, this is the best 4-turn choice for power-steered boats. Click here for guide on how to measure.
Suitable For:
Virtually all Power-Assisted Sterndrive and Inboard Boats with Wheels up to 16-inch Diameter.
- SS141xx Replaces 1984 and Newer SeaStar Solutions 'The Rack' Steering without dash modification (Requires use of SSC134xx Back Mount Rack Cable Enclosed).
Kit Contains the Following:
(1) SH5210P Helm; (1) SB39526P 90 Degree Bezel Kit; (1) SSC134xx Steering Cable; Hardware and Instruction Sheets.
Note: This System is for Single Station use ONLY. Components are available for Dual Cable Systems, but we Recommend No Feedback (NFB) Steering for all Dual Cable Steered, Non-Power Assisted Outboards. This System is only recommended as a replacement for the original system as installed by the boat manufacturer. SeaStar Solutions always recommends NFB Helms for Outboard Applications.
Note: SSC124xx Old Style Rack Cables cannot be used with these systems.
-
Precise, Easy 4 Turns Lock-to-Lock
-
Standard 3/4" Round Tapered Steering Shaft
-
Stainless Steel Cable Output Ends
-
Fast, Easy Installation: Back Mount Design Allows Quick Placement in Dash PLUS Mounting Hardware fits Old Teleflex and SeaStar Solutions Rack Holes
-
Meets A.B.Y.C. Standards
-
Meets N.M.M.A. Certification Requirements
-
Made, Designed and Assembled in the USA
-
Kit Sizes vary from 8 to 20 Feet
|
|
This Part has options, please click the button below to order.
MULTIPLE PART NUMBER OPTIONS. CLICK PART OPTIONS FOR MORE INFO -> Traditional SeaStar Solutions mechanical steering is still the choice for sterndrives, inboards and other power-assisted applications. It's just right for power-steered boats in which No-Feedback Systems are not Required. Click here for how to measure for replacement cable.
Safe-T QC Offers the Quick Response of Three-Turn Steering, and Easy Installation with a Patented, No-Tools-Required Cable Connection at the Helm.
Suitable For:
Virtually all Single-Station Power-Assisted Sterndrive boats with wheels up to 16-inch diameter.
- All SeaStar Solutions Safe-T Helms made since 1968 with little or no Dash Modifications.
Kit Contains the Following:
(1) SH5094-1P Helm; (1) SB27484P 90 Degree Bezel Kit; (1) SSC62xx Steering Cable; Hardware and Instruction Sheets.
-
Quick-Response of 3 Turns Lock-to-Lock
-
Standard 3/4" Round Tapered Steering Shaft
-
Stainless Steel Cable Output Ends
-
Fast, Easy Installation - Uses Simple Snap-In cable connection, SeaStar Solutions Quick Connect (QC) cable, and Industry-Standard Safe-T Mounting Hardware
-
All SeaStar Solutions Steering Cables exceed ABYC Safety Standards and ISO/IMCI/NMMA Certification.
-
Made, Designed and Assembled in the USA
-
Kit Sizes vary from 8 to 23 Feet
|
|
This Part has options, please click the button below to order.
MULTIPLE PART NUMBER OPTIONS. CLICK PART OPTIONS FOR MORE INFO ->
- SSC134XX Steering Cable is fitted with Stainless Steel Cable Output Ends which provide Reliability and Durability for corrosion resistance
- Rack & Pinion Steering Cable Replaces 1996 - Current SeaStar Solutions/Original Teleflex "Backmount Rack" Steering Cable installed by the original boat manufacturer
- Meets or Exceeds NMMA and ABYC Standards
- Proudly Made, Designed & Assembled in the USA
- Fits SH5210P, SH5230P, SH91610P and SH91630P. Buyer needs to check current steering cables to confirm they purchase the correct OEM replacement.
- Does not replace older SSC124 cables, for that cable replacement buy the M86 cable.
|
|
