Generic

A closed back design completely insulates power from the mounting surface. Each screw pair is one isolated circuit. Optional jumpers allow creation of common circuits.

Gang: 10, Amps: 30, Fastener: #8

Sold: Each

A closed back design completely insulates power from the mounting surface. Each screw pair is one isolated circuit. Optional jumpers allow creation of common circuits.

Gang: 12, Amps: 30, Fastener: #8

Sold: Each

A closed back design completely insulates power from the mounting surface. Each screw pair is one isolated circuit. Optional jumpers allow creation of common circuits.

Gang: 2, Amps: 30, Fastener: #8

Sold: Each

A closed back design completely insulates power from the mounting surface. Each screw pair is one isolated circuit. Optional jumpers allow creation of common circuits.

Gang: 4, Amps: 30, Fastener: #8

Sold: Each

A closed back design completely insulates power from the mounting surface. Each screw pair is one isolated circuit. Optional jumpers allow creation of common circuits.

Gang: 6, Amps: 20, Fastener: #6

Sold: Each

A closed back design completely insulates power from the mounting surface. Each screw pair is one isolated circuit. Optional jumpers allow creation of common circuits.

Gang: 6, Amps: 30, Fastener: #8

Sold: Each

Terminal Block Ind 6 Cir 30A

Blue Sea Systems 20/30/65 Ampere Terminal Blocks have a closed back design for fully insulated independent terminal blocks and are for use in instances where circuits need to be isolated. Available with a variety of circuit combinations and max amperage.

Features:
• Each screw pair is one isolated circuit
• Jumpers allow creation of common circuits
• Nickel-plated brass

A closed back design completely insulates power from the mounting surface. Each screw pair is one isolated circuit. Optional jumpers allow creation of common circuits.

Gang: 8, Amps: 20, Fastener: #6

Sold: Each

A closed back design completely insulates power from the mounting surface. Each screw pair is one isolated circuit. Optional jumpers allow creation of common circuits.

Gang: 8, Amps: 30, Fastener: #8

Sold: Each

Terminal Block Ind 8 Cir 30A

Blue Sea Systems 20/30/65 Ampere Terminal Blocks have a closed back design for fully insulated independent terminal blocks and are for use in instances where circuits need to be isolated. Available with a variety of circuit combinations and max amperage.

Features:
• Each screw pair is one isolated circuit
• Jumpers allow creation of common circuits
• Nickel-plated brass

Contains terminal eye pin, E-ring, nut and washer.

Cable: 3300

Sold: Each

Ideal for passing high current cables through hulls, decks and bulkheads where watertight or vapor proof integrity must be maintained. Feed-Through Terminals also eliminate chafing and provide strain relief for large cables. Larger terminals have a mounting face that can be gasketed or bedded to provide a watertight installation.

Stud: 3/8"-16 ", Size: Small, Color: Black, Max Amps: 250

Sold: Each

Ideal for passing high current cables through hulls, decks and bulkheads where watertight or vapor proof integrity must be maintained. Feed-Through Terminals also eliminate chafing and provide strain relief for large cables. Larger terminals have a mounting face that can be gasketed or bedded to provide a watertight installation.

Stud: 5/16"-18", Size: Small, Color: Red, Max Amps: 250

Sold: Each

Terminal Fuse Block 1 Stud 3/8" 

The Blue Sea Systems Terminal Fuse Blocks can be mounted on a 3/8" battery post or switch, or a busbar. The fuse blocks are an economical means of meeting the ABYC 7" circuit protection rule while providing high current protection. The new isolated stud design permits stacking of terminals and uses standard 1/4" hardware. The compact, high-AMP fuse is appropriate for DC main, inverter, windlass, and bow thruster circuit protection.

Features:
• Terminal studs: 2
• Mounting hole: 3/8"
• Max volts: 58V DC
• Weatherproof - suitable for small open-cockpit boats and other harsh environments

Terminal Fuse Block, 30-300 Amps

• Compact, high-amp fuse, appropriate for DC main, inverter, windlass, and bow thruster circuit protection


• Provides high current protection in tight space constraints


• Weatherproof - suitable for small open cockpit boats and other harsh environments


• Mounts to 3/8" battery post, battery switch, or bus system.


• Use on systems up to 58VDC

Amps: 30-300, Fuse: Terminal, Stud: 1/4"-20", Size: 2.40'' x .79''

Sold: Each

Terminal Fuse, 175 Amp, White

• Interrupt rating satisfies ABYC requirements for DC main circuit protection


• Appropriate for inverters, windlasses, and bow thrusters.


• Ignition protected


• Clear window - visual indication of blown condition


• Color coded for each amperage

Amps: 175, Color: White

Sold: Each

Terminal Fuse, 250 Amp, Pink

• Interrupt rating satisfies ABYC requirements for DC main circuit protection


• Appropriate for inverters, windlasses, and bow thrusters.


• Ignition protected


• Clear window - visual indication of blown condition


• Color coded for each amperage

Amps: 250, Color: Pink

Sold: Each

Terminal Fuse, 30 Amp, Blue

• Interrupt rating satisfies ABYC requirements for DC main circuit protection
• Appropriate for inverters, windlasses, and bow thrusters.
• Ignition protected
• Clear window - visual indication of blown condition
• Color coded for each amperage

Amps: 30, Color: Blue

Terminal Fuse, 300 Amp, Gray

• Interrupt rating satisfies ABYC requirements for DC main circuit protection


• Appropriate for inverters, windlasses, and bow thrusters.


• Ignition protected


• Clear window - visual indication of blown condition


• Color coded for each amperage

Amps: 300, Color: Gray

Sold: Each

Terminal Fuse, 40 Amp, Green

• Interrupt rating satisfies ABYC requirements for DC main circuit protection


• Appropriate for inverters, windlasses, and bow thrusters.


• Ignition protected


• Clear window - visual indication of blown condition


• Color coded for each amperage

Amps: 40, Color: Green

Sold: Each