Generic

Tie Down Engineering Galvanized Roller Bunk - Sold as Pair
Your Price:
$287.99

Tie Down Engineering Galvanized Roller Bunk - Sold as Pair

462-241-86157

Replace bunk boards with these roller bunks. Heavy-duty galvanized steel frame provides full hull support. Roller bunks can be adjusted vertically with optional bolster support swivel brackets. Does not include mounting hardware.

Length: 4', Capacity: 1,200 lb. , Box: 2

Sold: Box


Tie Down Engineering Galvanized Roller Shaft w/Pal Nuts
Your Price:
$15.99

Tie Down Engineering Galvanized Roller Shaft w/Pal Nuts

462-241-86184

Packaged roller shaft/pal nut combinations make for easier consumer purchases. Roller shafts come with roller shaft and 2 pal nuts.

Size: 1/2" ? 6-1/4"


Tie Down Engineering Galvanized Roller Shaft w/Pal Nuts
Your Price:
$17.99

Tie Down Engineering Galvanized Roller Shaft w/Pal Nuts

462-241-86185

Packaged roller shaft/pal nut combinations make for easier consumer purchases. Roller shafts come with roller shaft and 2 pal nuts.

Size: 5/8" ? 5-1/4"


Tie Down Engineering Galvanized Roller Shaft w/Pal Nuts
Your Price:
$17.99

Tie Down Engineering Galvanized Roller Shaft w/Pal Nuts

462-241-86186

Packaged roller shaft/pal nut combinations make for easier consumer purchases. Roller shafts come with roller shaft and 2 pal nuts.

Size: 5/8" ? 6-1/4"


Tie Down Engineering Galvanized Roller Shaft w/Pal Nuts
Your Price:
$14.99

Tie Down Engineering Galvanized Roller Shaft w/Pal Nuts

462-241-86187

Packaged roller shaft/pal nut combinations make for easier consumer purchases. Roller shafts come with roller shaft and 2 pal nuts.

Size: 5/8" ? 9-1/4"


Tie Down Engineering Galvanized Roller Shaft w/Pal Nuts
Your Price:
$15.99

Tie Down Engineering Galvanized Roller Shaft w/Pal Nuts

462-241-86188

Packaged roller shaft/pal nut combinations make for easier consumer purchases. Roller shafts come with roller shaft and 2 pal nuts.

Size: 5/8" ? 11-1/4"


Tie Down Engineering Galvanized Roller Shaft w/Pal Nuts
Your Price:
$16.99

Tie Down Engineering Galvanized Roller Shaft w/Pal Nuts

462-241-86189

Packaged roller shaft/pal nut combinations make for easier consumer purchases. Roller shafts come with roller shaft and 2 pal nuts.

Size: 5/8" ? 13-1/4"


Tie Down Engineering Galvanized Steel 7 x 19 Winch Cable With Galvanized Latch Hook
Your Price:
$49.99

Tie Down Engineering Galvanized Steel 7 x 19 Winch Cable With Galvanized Latch Hook

462-241-59379

Made of galvanized steel 7 x 19 aircraft cable to handle heavy loads. Each cable is fitted with a heavy-duty galvanized latch hook, pull proof loop and a fastener end for replacement use on Powerwinch and other power electric winches.

Size: 3/16" x 20', Break Strength: 4200 lbs.


Tie Down Engineering Galvanized Steel 7 x 19 Winch Cable With Galvanized Latch Hook
Your Price:
$37.99

Tie Down Engineering Galvanized Steel 7 x 19 Winch Cable With Galvanized Latch Hook

462-241-59380

Made of galvanized steel 7 x 19 aircraft cable to handle heavy loads. Each cable is fitted with a heavy-duty galvanized latch hook, pull proof loop and a fastener end for replacement use on Powerwinch and other power electric winches.

Size: 1/8" x 20', Break Strength: 2000 lbs.


Tie Down Engineering Galvanized Steel 7 x 19 Winch Cable With Galvanized Latch Hook
Your Price:
$55.99

Tie Down Engineering Galvanized Steel 7 x 19 Winch Cable With Galvanized Latch Hook

462-241-59385

Made of galvanized steel 7 x 19 aircraft cable to handle heavy loads. Each cable is fitted with a heavy-duty galvanized latch hook, pull proof loop and a fastener end for replacement use on Powerwinch and other power electric winches.

Size: 3/16" x 25', Break Strength: 4200 lbs.


Tie Down Engineering Galvanized Steel 7 x 19 Winch Cable With Galvanized Latch Hook
Your Price:
$59.99

Tie Down Engineering Galvanized Steel 7 x 19 Winch Cable With Galvanized Latch Hook

462-241-59390

Made of galvanized steel 7 x 19 aircraft cable to handle heavy loads. Each cable is fitted with a heavy-duty galvanized latch hook, pull proof loop and a fastener end for replacement use on Powerwinch and other power electric winches.

Size: 3/16" x 50', Break Strength: 4200 lbs.


Tie Down Engineering Galvanized Steel 7 x 19 Winch Cable With Galvanized Latch Hook
Your Price:
$42.99

Tie Down Engineering Galvanized Steel 7 x 19 Winch Cable With Galvanized Latch Hook

462-241-59395

Made of galvanized steel 7 x 19 aircraft cable to handle heavy loads. Each cable is fitted with a heavy-duty galvanized latch hook, pull proof loop and a fastener end for replacement use on Powerwinch and other power electric winches.

Size: 7/32" x 25', Break Strength: 5600 lbs.


Tie Down Engineering Galvanized Steel 7 x 19 Winch Cable With Galvanized Latch Hook
Your Price:
$57.99

Tie Down Engineering Galvanized Steel 7 x 19 Winch Cable With Galvanized Latch Hook

462-241-59400

Made of galvanized steel 7 x 19 aircraft cable to handle heavy loads. Each cable is fitted with a heavy-duty galvanized latch hook, pull proof loop and a fastener end for replacement use on Powerwinch and other power electric winches.

Size: 7/32" x 50', Break Strength: 5600 lbs.


Tie Down Engineering Galvanized Steel Panel Bracket
Your Price:
$15.99

Tie Down Engineering Galvanized Steel Panel Bracket

462-241-86150

"One piece, heavy-duty, hot dipped galvanized 11 gauge steel. Specifically designed to support keel rollers. Slots accept 7/16" or 1/2" diameter bolts and provide vertical adjustment. Roller shaft diameter can be 1/2" or 5/8". Bracket is 4-3/8" W. Roller size is 4"."

Width Between Slots: 2", Roller Size: 4", Bracket: 4-3/8" W"


Tie Down Engineering Galvanized Steel Panel Bracket
Your Price:
$16.99

Tie Down Engineering Galvanized Steel Panel Bracket

462-241-86151

"One piece, heavy-duty, hot dipped galvanized 11 gauge steel. Specifically designed to support keel rollers. Slots accept 7/16" or 1/2" diameter bolts and provide vertical adjustment. Roller shaft diameter can be 1/2" or 5/8". Bracket is 5-3/8" W. Roller size is 5"."

Width Between Slots: 3", Roller Size: 5", Bracket: 5-3/8" W"


Tie Down Engineering Galvanized Steel Panel Bracket
Your Price:
$24.99

Tie Down Engineering Galvanized Steel Panel Bracket

462-241-86152

"One piece, heavy-duty, hot dipped galvanized 11 gauge steel. Specifically designed to support keel rollers. Slots accept 7/16" or 1/2" diameter bolts and provide vertical adjustment. Roller shaft diameter can be 1/2" or 5/8". BRacket is 8-3/8" W. Roller size is 6"."

Width Between Slots: 6", Roller Size: 8", Bracket: 8-3/8" W"


Tie Down Engineering Galvanized Steel Panel Bracket
Your Price:
$30.99

Tie Down Engineering Galvanized Steel Panel Bracket

462-241-86153

"One piece, heavy-duty, hot dipped galvanized 11 gauge steel. Specifically designed to support keel rollers. Slots accept 7/16" or 1/2" diameter bolts and provide vertical adjustment. Roller shaft diameter can be 1/2" or 5/8". Bracket is 12-3/8" W. Roller size is 12"."

Width Between Slots: 10", Roller Size: 12", Bracket: 12-3/8" W"


Tie Down Engineering Galvanized Steel Panel Bracket
Your Price:
$26.99

Tie Down Engineering Galvanized Steel Panel Bracket

462-241-86155

"One piece, heavy-duty, hot dipped galvanized 11 gauge steel. Specifically designed to support keel rollers. Slots accept 7/16" or 1/2" diameter bolts and provide vertical adjustment. Roller shaft diameter can be 1/2" or 5/8". Bracket is 10-3/8" W. Roller size is 10"."

Width Between Slots: 8", Roller Size: 10", Bracket: 10-3/8" W"


Tie Down Engineering Galvanized Steel Panel Bracket Assembly
Your Price:
$48.09

Tie Down Engineering Galvanized Steel Panel Bracket Assembly

462-241-86414

"Assemblies include amber or black poly vinyl keel roller, shaft & pal nuts. Brackets are one piece, heavy-duty hot dip galvanized 11 gauge steel, specifically designed to support keel rollers. Bracket 5-3/8" with 5" roller size."

Roller Size: 5", Width Between Slots: 3", Bracket: 5-3/8", Type: Poly, Color: Black


Tie Down Engineering Galvanized Steel Panel Bracket Assembly
Your Price:
$71.79

Tie Down Engineering Galvanized Steel Panel Bracket Assembly

462-241-86415

"Assemblies include amber or black poly vinyl keel roller, shaft & pal nuts. Brackets are one piece, heavy-duty hot dip galvanized 11 gauge steel, specifically designed to support keel rollers. Bracket 8-3/8" with 8" roller size."

Roller Size: 8", Width Between Slots: 6", Bracket: 8-3/8", Type: Poly, Color: Black