462-180-82180 Permatex Ultra Black OEM silicone. Fast curing formula. Sensor safe, low odor, non corrosive. Meets performance specs of OE silicone gaskets. - Black For Heavy Duty Oil Applications - Suggested Applications: Valve covers, oil pans, intake manifold end seals, timing covers, water pumps, thermostat housings
- Blue Suggested Applications: Valve covers, oil pans, intake manifold end seals, timing covers, water pumps, thermostat housings
- Copper - For High Temperature and Performance Applications - Suggested Applications: Exhaust manifolds/headers, valve covers, oil pans, intake manifold end seals, water pumps, exhaust tubes
- Grey For Rigid Torque and High Vibration Applications Suggested Applications: Cover housing gasket, differential, assembly to rear axle housing, power dividers, axle shaft flanges
Size: 3.35 oz, carded, Color: Black, Case: 12 Sold: Each
|
|
462-180-81724 Sensor-safe, low odor, non-corrosive. Outstanding oil resistance and joint movement valves. Eight times more flexible than cork/composite gaskets; three times more oil resistant than conventional silicones. Temperature range -75° F to 500° F intermittent; resists auto and shop fluids and vibration. Size: 3.35 oz. Tube, Case: 6 Sold: Each
|
|
462-180-81878 For 4-cylinder, turbocharged or high performance engines. Sensors safe, low odor, non-corrosive. Superior adhesion. Temp range -75° F-700° F. Perfect for exhaust manifolds/headers, valve covers, oil pan, timing covers, water pumps, thermostat housings. Size: 3 oz. tube, Case: 12 Sold: Each
|
|
462-43-COMP16 Designed specifically for fiberglass and gelcoat. Contains oxidation removers and lubricants that reduce heat and friction. Has a diminishing abrasive that gets finer as you polish, with penetrating wax to protect finish. Ultra-gloss with its diminishing abrasive allows you to complete all the steps necessary to bring badly oxidized or dull fiberglass up to a high gloss finish in just one step. Can be hand or machine applied.
Description: Ultra Gloss Fiberglass Restoring Compound, Size: Pint, Case: 12
Sold: Each
|
|
462-6-594511012 "This fully assembled pressure set includes a pump, strainer and pre-pressurized accumulator tank rubber mounted on a board. Serves 3 or more 1/2" outlets, is self-priming up to 10' and is suitable for vertical or horizontal installation. Quadruple diaphragm design for smooth, quiet operation is also capable of extended dry running. Motor is thermal overload protected and complies with USCG 183.410 and ISO 8846 marine ignition protection. Includes 1/2" hose barb and 1/2" QEST fittings. 15 1/2" L x 15 3/4" W x 5 1/2" H." GPM: 3.5, Rating: 10-25 psi, Volts: 12, Amps: 6 Sold: Each
|
|
462-158-TLL90RK Durable, waterproof LED trailer light set ideal for harsh marine conditions. Packaged set includes two LED stud mount tail lights and mounting hardware for quick and easy upgrade to LED. Lifetime LED Warranty. Durable, waterproof LED trailer light set ideal for harsh marine conditions. Stud mount. Packaged set contains two LED tail lights: (1) STL8RB 6-function: stop, turn, tail, rear reflex, side marker, side reflex and (1) STL9RB 7-function LED tail light with license light. Mounting hardware included. Lifetime LED Warranty.
|
|
462-3-99182 Under Platform Mount
Description: Under Platform Mt., Size: 3-3/16'' x 9-3/4''
Sold: Each
|
|
464-2527511 UNDER-80 SUBM TAILLIGHT KIT
The Wesbar Submersible Under 80" Taillight Kit provides lights and wiring for use on boat and PWC trailers under 80" wide. The taillights feature gasketed lenses which protect bulbs and contacts when submerged.
Kit Includes:
- 2 Under 80" taillights (right and left)
- License plate bracket
- Wishbone trailer wiring harness
- 4' Trunk connector
|
|
462-232-LED51900DP - 316 Stainless Steel Bezel
- Six Bright LEDs - Lights Up Transoms
- No High Heat - Can Be Used Above Water
Lumens: 108, LEDs: 6, LED Color: White, Bezel: 316 Stainless Steel - 316 Stainless Steel Bezel
- Six Bright LEDs - Lights Up Transoms
- No High Heat - Can Be Used Above Water
|
|
462-232-LED51901DP - 316 Stainless Steel Bezel
- Six Bright LEDs - Lights Up Transoms
- No High Heat - Can Be Used Above Water
Lumens: 78, LEDs: 6, LED Color: Blue, Bezel: 316 Stainless Steel - 316 Stainless Steel Bezel
- Six Bright LEDs - Lights Up Transoms
- No High Heat - Can Be Used Above Water
|
|
462-1-HF5527 "All SeaStar manual hydraulic steering systems utilize the same style of fittings for all applications. These are 3/8" compression fittings which utilize a 9/16"-24 extra fine thread."
Type: Union Coupling Fitting, Material: Brass, Bag: 3
Sold: Pack
|
|
462-38-44606 Bronze and imported. NOT TO BE USED IN POTABLE WATER SYSTEMS. Size: 1-1/4"
|
|
462-38-44605 Bronze and imported. NOT TO BE USED IN POTABLE WATER SYSTEMS. Size: 1"
|
|
462-38-44604 Bronze and imported. NOT TO BE USED IN POTABLE WATER SYSTEMS. Size: 3/4"
|
|
464-420488-1 Universal Kill Switch w/Lanyard 7/16"
Sea-Dog Universal Kill Switches with Lanyards can be wired for either ignition kill or magneto kill. They have a maximum amperage of 5Amp.
|
|
462-57-60104 12 volt - 55 amp
Internal regulator
Negative ground
Single groove pulley - 12 volt - 55 amp
- Internal regulator
- Negative ground
- Single groove pulley
Type: New Sold: Each
|
|
462-47-8040 Universal 1/4" Female Fuel Tank Elbow Connector: 90° Elbow, Replaces: Yamaha ABA-FBARB-90-DG, Thread: 1/4" NPT, Hose: - NOT TO BE USED IN POTABLE WATER SYSTEMS.
|
|
462-354-3356901 "Will fit all Sea Dog fuel fills as well as most others on the market. Also included on the key is a shackle key, bottle opener, and a straight blade screwdriver, plus 5/16" and 7/16" hex hed wrench. Made from stamped 304 stainless steel."
A: 4", B: 2-3/4", C: 1-1/16", D: 1-3/16"
Sold: Each
|
|
462-47-79822 Sierra fuel water separators remove over 98.8% of emulsified water from your gasoline. Sierra's 10 micron filters are over 90% efficient at removing particles as small as 10 micron. All filters flow @ 90 GPH to feed even the hungriest motor. Recommended to prevent damage to sensitive inboard and outboard fuel injection systems.Includes: Bracket, Filter and 2 brass pipe plugs (3/8" plug - 18-4264, 1/4" plug - 18-4256) Type: 1/4" Aluminum, Filter: Tall, Contains: (2) 7945 & (1) 7853-1, Replaces: Johnson/Evinrude, Mercury/Mariner, Yamaha, Mercruiser,
OMC Sterndrive/Cobra, Volvo fuel injection Sierra fuel water separators remove over 98.8% of emulsified water from your gasoline. Sierra's 10 micron filters are over 90% efficient at removing particles as small as 10 micron. All filters flow @ 90 GPH to feed even the hungriest motor. Recommended to prevent damage to sensitive inboard and outboard fuel injection systems.
|
|
462-47-79832 Sierra fuel water separators remove over 98.8% of emulsified water from your gasoline. Sierra's 10 micron filters are over 90% efficient at removing particles as small as 10 micron. All filters flow @ 90 GPH to feed even the hungriest motor. Recommended to prevent damage to sensitive inboard and outboard fuel injection systems.Includes: Bracket, Filter and 2 brass pipe plugs (3/8" plug - 18-4264, 1/4" plug - 18-4256) Type: 1/4" Aluminum, Filter: Short, Contains: (2) 7944 & (1) 7853-1, Replaces: Johnson/Evinrude, Mercury/Mariner, Yamaha, Mercruiser,
OMC Sterndrive/Cobra, Volvo fuel injection Sierra fuel water separators remove over 98.8% of emulsified water from your gasoline. Sierra's 10 micron filters are over 90% efficient at removing particles as small as 10 micron. All filters flow @ 90 GPH to feed even the hungriest motor. Recommended to prevent damage to sensitive inboard and outboard fuel injection systems.
|
|
