462-177-E150BKR Functions as a side marker or clearance light; may be used as a combination light when mounted properly. Lens is welded to housing. Features a 15,000 long-life bulb.
Kit includes 150 light, chassis mounting bracket, lead wire and mounting screws. Lens: Red w/Black Base Sold: Each
|
|
462-177-14318K Description: 2?" Flush Mount Grommet Kit"
|
|
462-177-14618K Description: 2" Flush Mount Grommet Kit"
|
|
462-177-11415A Description: Amber replacement lens Sold: Each
|
|
462-177-E5401 Harness extensions available in both 4-way and 5-way flat configurations. Each configuration has trailer connector on one end and trunk connector on other. Perfect for those times when an extension is needed between the tow vehicle and trailer. Connector: 4-Way Harness Extension, Lead: 30", Case: 6
|
|
462-177-E440 Lights exceed DOT requirements for stop, tail, turn signal, rear and side reflex, side marker light and license illuminator (L suffix only). E440L measures 4-1/2" x 5" x 2-7/8". Description: Right Side: Without License Light
|
|
462-177-E440L Lights exceed DOT requirements for stop, tail, turn signal, rear and side reflex, side marker light and license illuminator (L suffix only). E440L measures 4-1/2" x 5" x 2-7/8". Description: Left Side: With License Light
|
|
462-177-E441 Features gasketed lens to prevent water from entering the light. Mounts on 2" center and includes mounting hardware. Grounds through 1/4" mounting studs. Exceeds DOT requirements for stop, turn, rear & side reflex, side marker and license plate illuminator (L suffix only). Description: Right Side: Without License Light
|
|
462-177-E441L Features gasketed lens to prevent water from entering the light. Mounts on 2" center and includes mounting hardware. Grounds through 1/4" mounting studs. Exceeds DOT requirements for stop, turn, rear & side reflex, side marker and license plate illuminator (L suffix only). Description: Left Side: With License Light
|
|
462-177-E546 Kit includes one each of 441/441L tail light, two 108A side marker lights, 20' trailer harness, 48" truck connector, license bracket, mounting hardware and installation instructions. Black housing.
|
|
462-177-V540 Kit provides all legal lighting and reflectors for trailers under 80" wide. Includes one each of the 440/400L tail lights, two 114A side marker lights, 20' trailer harness, 48" trunk connector, license bracket, mounting hardware, and installation instructions.
|
|
462-177-E126C Use as a 12 volt courtesy or step light for low level general illumination. Compact, low profile housing is chrome plated over molded ABS housing. Flush mounts on 2-11/16" centers with a separate ground lead wire.
Size: 3-3/4" L x 2-1/4" W x 1/2" H
|
|
462-354-2702301 316 Stainless steel. Packed one per card. Pin: 1/4" Bolt, Base: 3/4" x 2-1/4", Fastener: #10
|
|
This Part has options, please click the button below to order.
MULTIPLE PART NUMBER OPTIONS. CLICK PART OPTIONS FOR MORE INFO -> Auto Prop Propeller Nut Anodes w/Nylon Inserts
Sizes:
- H-5, H-5BB & Saildrive propellers.
- H-6 propellers
- Material: Zinc
|
|
This Part has options, please click the button below to order.
MULTIPLE PART NUMBER OPTIONS. CLICK PART OPTIONS FOR MORE INFO -> Line Cutter Zinc Size: .367" W x .680" H, Material: Zinc
|
|
464-329230-1 Antenna Base Adjustable SS
The Seadog Adjustable Antenna Base has a complete stainless steel construction with an internal feed system for Loran Cable. The base has dual swiveling mounts that allow for full adjustability.
- Size: 4-1/2"L x 2-1/2"W x 3-5/8"D
- Investment Cast 316 Stainless steel
- Use 1/4" flat head fasteners for mounting
|
|
464-329300-1 Antenna Base Adjustable Zinc
Seadog Antenna Bracket has an integral feed system for a Loran cable.
- Size: 4-3/4"L x 2-1/8"W x 3-5/8"D
- Die cast zinc construction
- Accepts any standard antenna with 1" - #14 threads
- Use 1/4" flat head fasteners for mounting
|
|
464-329130-1 Antenna Base w/Lever White
- Color: White
- Accepts standard antenna with 1" #14 threads,/li>
- Injection molded nylon
- Use 1/4" flat head fasteners for mounting
|
|
462-354-3291301 "Molded nylon. Bracket will accept any standard antenna with 1"-#14 threads. Fastener 1/4FH. Clam Shell." A: 4-3/4", B: 2-9/16", C: 3-5/8", D: 1-13/16", E: 2-13/16" Sold: Each
|
|
462-354-3295321 "Machined 304 stainless tubing. Threaded to fit 1"-14 mounts & antennas."
Length: 12"
|
|
