UFlex

Two high pressure flexible hoses with pre-crimped brass fittings, bulkhead fittings (for KIT OB-BHBR only) and bend restrictors on one end. Recommended for use with all Uflex helms with 1500 psi relief valves.

Two high pressure flexible hoses with pre-crimped brass fittings, bulkhead fittings (for KIT OB-BHBR only) and bend restrictors on one end. Recommended for use with all Uflex helms with 1500 psi relief valves.

Protech Hydraulic Helm Steering, for application up to 300HP. Available with Standard or Tilt Helm

Larger horsepower applications require a more robust steering cylinder. The Uflex Protech cylinder is designed for single, dual and triple engine applications up to 300 hp per engine. Featuring heavy duty seals, 304 electro-polished link assemblies, and a carbon steel piston, it is built for the most demanding applications.

This kit includes Hydraulic Ram, Hydraulic Helm and 2 Quarts of Oil. Steering Wheel, Hose and fittings are sold separately!

See Application Guide on Additonal Info Tab to make sure you order the correct cylinder.

Uflex Non-Reversible Rack and Pinion Steering System Packaged in a Box

A convenient kit form, especially suitable as replacement steering, that includes helm, bezel and cable. The cable is available in 1-ft increments from 8 to 20 feet (specify cable length when ordering). Recommended for outboard applications or non power assisted sterndrives where there is limited space behind the dash, the Accutech features a patented spring clutch of the G88NR helm eliminates continuous loads while not actively changing direction. The M86 cable included with the Accutech has an armor wrapped stainless steel core for maximum efficiency and minimal lost motion. Click here for how to measure for replacement cable.

This kit includes:

• M86 - preassembled helm with steering cable
• G86NR - shaft assembly
• X34 - 90° bezel (diameter is 5 1/8")

Features and Technical Specifications:

• All stainless steel cable output ends
• Made exclusively in corrosion resistant materials
• Optional 90° or 20° installation
• Standard 3/4”tapered shaft
• Lock-to-lock steering wheel turns: 3,5
• Stroke: 8.2” (210 mm)
• Maximum allowable steering wheel diameter: 16.5” (420 mm)
• Minimum steering cable bend radius: 7,9” (200 mm)
• G86 steering systems are not to be used on boats equipped with engines that exceed the maximum horsepower rating of the boat
• Exceeds EN 28848 safety standards
• Exceeds ABYC P17 safety standards

Replacement 12v actuator for Uflex Tabs

Uflex Rotary Steering System Packaged in a Box - Non Reversible

With a patented spring clutch that Accura eliminates continuous loads on the steering wheel while the direction of the boat is not being actively changed, which is highly recommended for outboard and sterndrives without power assist. The T73FC helm included with the Accura package also features a Planetary Gear Design for smooth and more balanced steering effort. A direct drop in replacement for competing systems, the Accura comes with the M66 Universal Rotary Steering Cable with stainless steel output fittings for maximum longevity and smooth steering. A convenient kit form, especially suitable as replacement steering, that includes helm, bezel and cable. The cable is available in 1-ft increments from 8 to 20 feet (specify cable length when ordering). The wheel is not included. Click here for how to measure for replacement cable

This kit includes:

• T73NR FC - helm
• X34 - 90° bezel (diameter is 5 1/8")
• M66 - steering cable

Features and Technical Specifications:

• Cable Entry can be set from either Port or Starboard sides
• Fast connect, simple installation
• All stainless steel cable output ends
• Corrosion resistant materials
• Particularly suitable where clearance is limited
• Optional 90° or 20° installation
• Standard 3/4” tapered shaft
• Lock-to-lock steering wheel turns: approx. 3,8
• Stroke: 9” (228 mm)
• Maximum allowable steering wheel diameter: 16” (406 mm)
• Minimum steering cable bend radius: 7.9” (200 mm)
• Minimal feedback
• Compact for mounting
• T71FC steering systems are not to be used on boats equipped with engines that exceed the maximum horsepower rating of the boat.
• For boats faster than 50 mph the twin cable steering system T72FC is recommended
• Exceeds EN 28848 safety standards
• Exceeds ABYC P17 safety standards

SILVERSTEER Front Mount Outboard System for 350hp and Less. Includes: UC128-SVS cylinder. Available with Standard or Tilt Helm.

Specifically designed for high performance and high torque applications, the SilverSteer features a 1,500 psi helm and keyed bullhorns on the cylinder for maximum durability and minimal lost motion.

Whether a bass boat, flat boat or tournament style offshore fishing boat, the SilverSteer™ will deliver smooth, responsive and precise steering.

Adjustable boss style fittings allow precise hose routing without the risk of breaking the fittings by overtightening or leaking fittings from loosening during installation, a common problem on competing cylinders.

• Horsepower: Single engine, up to 350hp, dual engines, up to 600hp (total)
• Helm: 7.3 cu in/120cc
• Hose: 1,500psi
• Turns Lock-to-Lock: 4.3
• Included Equipment: UP28 F-SVS front mount helm pump, UC128-SVS front mount outboard cylinder, hydraulic oil (two qts.), Hose kits sold separately
• Steering Wheel Shaft: 3/4" tapered
• Warranty: Two years

This kit includes Hydraulic Ram, Hydraulic Helm and 2 Quarts of Oil. Steering Wheel, Hose and Thru Hull fittings are sold separately!

See Application Guide on Additonal Info Tab to make sure you order the correct cylinder.

All standard helms are manufactured using the very latest in permanent mold die cast tooling to provide the strongest and finest finished castings Coupled with CNC machined hardened shafts and gears you can be assured these units provide years of faithful trouble free use.

Non-Magnetic Stainless Steel Cross Spokes Steering Wheel, 13.8" Diameter, Black Polyurethene Grip

Non-Magnetic Stainless Steel Cross Spokes Steering Wheel, 13.8" Diameter, Buckskin Polyurethene Grip

Non-Magnetic Stainless Steel Cross Spokes Steering Wheel, 13.8" Diameter, Grey Polyurethene Grip

Non-Magnetic Stainless Steel Cross Spokes Steering Wheel, 13.8" Diameter, Stainless Steel Grip

Need help installing your new steering wheel? Check out this handy tutorial!

Non-Magnetic Stainless Steel Cross Spokes Steering Wheel, 13.8" Diameter, Teak Grip

Need help installing your new steering wheel? Check out this handy tutorial!

Non-Magnetic Stainless Steel Cross Spokes Steering Wheel, 13.8" Diameter, White Polyurethene Grip

Need help installing your new steering wheel? Check out this handy tutorial!

Non-Magnetic Stainless Steel Cross Spokes Steering Wheel, 15.7" Diameter, Stainless Steel Grip

Need help installing your new steering wheel? Check out this handy tutorial!

Non-Magnetic Stainless Steel Cross Spokes Steering Wheel, 15.7" Diameter, Teak Grip

Need help installing your new steering wheel? Check out this handy tutorial!

Non-Magnetic Stainless Steel Helix Spokes Steering Wheel, 13.8" Diameter, Black Polyurethene Grip

Need help installing your new steering wheel? Check out this handy tutorial!

Non-Magnetic Stainless Steel Helix Spokes Steering Wheel, 13.8" Diameter, Blue Polyurethene Grip

Need help installing your new steering wheel? Check out this handy tutorial!

Non-Magnetic Stainless Steel Helix Spokes Steering Wheel, 13.8" Diameter, Grey Polyurethene Grip

Need help installing your new steering wheel? Check out this handy tutorial!