XRP Fittings

Ti-Tech Finish 90 Degree Push-On Hose Ends are super lightweight, easy to assemble, and provide great performance. Machined from aluminum alloy, these hose ends are ONLY compatible with Push-On hoses, Not the stainless steel braided hose or XR-31 hose. All hose ends are 37 degree. Use Push-On hose clamps for all high temperature & oil line applications.

These XRP Aluminum Performance Hose Ends have a Ti-Tech Finish and are designed with the aviation nipple and cutter design, to prevent blow off and leakage problems that can be encountered by other styles of hose ends when assembled with stainless steel or nylon braided hose. XRP Hose Ends are manufactured from specially heat treated 2024-T851 aluminum per QQA-225/6 and 6061-T651 aluminum per QQA-225/8 as specified for those fittings. All hose ends are JIC 37°.

Ti-Tech Finish Straight Push-On Hose Ends are super lightweight, easy to assemble, and provide great performance. Machined from aluminum alloy, these hose ends are ONLY compatible with Push-On hoses, Not the stainless steel braided hose or XR-31 hose. All hose ends are 37 degree. Use Push-On hose clamps for all high temperature & oil line applications.

Tough lightweight hose that is a sure bet for racers and performance enthusiasts. It's versatile, flexible, easy to cut and assemble with a number of attractive characteristics including: excellent temperature resistance -40 degree to +300 degree F, high tube strength, tight bend radius capable of tight engine compartments. 3-ply construction consists of full coverage Nylon-bonded outer braid for abrasion-resistance, partial coverage embedded braid middle layer, and CPE synthetic rubber inner tube for great flow and high temperature resistance. XR-31 Hose is made in the USA and offers a significant weight-savings over stainless steel braided hose. Because today's fuels can contain a wide variety of unpublished additives, it is not possible for us to accurately predict compatibility of the inner liner of XR-31 hose with any specific fuel. We recommend HS-79 Teflon-lined hose, if in doubt. XR-31 hose is NOT compatible with brake fluid. Shown with Black AN Hose adapter, which is not included. Temperature Range is -40°F to 300°F. See Specifications Tab for Max Pressures

XR-31 Nylon Braided Hose is Sold by the foot, i.e. add quantity 6 for 6ft. Of hose.

Hose comes in maximum of 25 feet sections. Please specify if you want sections cut into specific lengths when ordering over 25 feet.

Super Stock Push-On Hose is constructed of CPE (Chlorinated polyethylene) elastomer tube, textile braid reinforced with CPE elastomer cover. Maximum operating pressure is 250 PSI and Temperature range is -40°F to 300°F Applications for this hose are gasoline, fuel, lubricating oils, air and water. This superior replacement hose for original equipment applications has recently found favor with professional racing teams. Shown with Super Nickel Push-On Hose Fittings, which are not included.

Hose comes in maximum of 25 feet sections. Please specify if you want sections cut into specific lengths when ordering over 25 feet.

Super Stock Push-On Hose is constructed of CPE (Chlorinated polyethylene) elastomer tube, textile braid reinforced with CPE elastomer cover. Maximum operating pressure is 250 PSI and Temperature Range is 40°F to 300°F. Applications for this hose are gasoline, fuel, lubricating oils, air and water. This superior replacement hose for original equipment applications has recently found favor with professional racing teams. Shown with Super Nickel Push-On Hose Fittings, which are not included.

Hose comes in maximum of 25 feet sections. Please specify if you want sections cut into specific lengths when ordering over 25 feet.