Marine Lighting - Hull, Spotting & Accent Lights

The Gravity LED Deck Lights feature a machined aluminum housing are surface mounted to the substrate. No need to core a hole. Just run your wire, connect, and fasten to the fiberglass roof or wall of your boat. This unique aspect of the Gravity LED lights makes it a favorite for boat builders.

With the housing being the same for each model, we give you the option to pick and choose which faceplate you would like such as Dome, Surface Mounted, Flush Mount, and Eyelid. Each faceplate is available in stainless steel, white, and black housing as well as the LED colors are blue, green, red, cool white, warm white, and RGB.

• Input: DC12V~DC24V
• Power: 1.2WAmp
• Draw: 0.2A @ 12VDC
• Lamp type: 1PC x 1W OSRAM LED
• Temperature Color: RGB (Red, Green, Blue)
• Beam Angle: 120 Degrees
• IP Rating: IP67
• Power Wire: 9ft of Copper Tinned 4 Conductor Wire, Black Insulated Jacket
• Warranty: Lifetime 
• RGB Controller is Sold Separately.

Waterproof LED Channel is a Linear LED light bar fixtures that is a very versatile solution for a variety of lighting needs. This includes under gunnel lighting for boats, hatch lighting, cutting board work areas, tool box lighting, cabinet lighting, under-cabinet lighting, desk lighting, bookshelf lighting, showcase lighting, truck bed lighting, RV ceiling lights, and many more.

Aluminum channels are a crucial part of any linear LED fixture. They act as a durable, lightweight housing for LED strip lighting of any color temperature, color, or output. Most importantly they act as the primary source of thermal management for your LED strips.

This 3/4" wide aluminum LED light bar emits up to 710 lumens per foot and is available in many color options as well as RGB, dual-color, and custom OEM designs. This waterproof light fixture has 12 VDC operation and is equipped with a 3 ft black insulated power wire on one end and mounting tabs on both ends for easy installation.  Mounting hardware sold separately.

Great for: Boats, Docks, Outdoor Bars & Patios, Bathrooms, Kitchens, Swimming Areas, Steps, Coves, Under Cabinets, Side by Sides, Work Trucks, Tool Boxes, Truck Beds, Amp Steps.

Dimensions: 3/4" WIDE (18mm)  x  1/2" TALL (12mm)  x  LENGTH ORDERED

Specifications:

• IP68 Waterproof
• Fully Potted - UV Rated
• 9ft. Black Insulated Power Cord Included 
• 12 Volts DC Input 
• Amp Draw: 0.275A / per foot @ 12V
• High Quality / High Output LED's - Will Not Go Out Premature (Like Others)
  
• 30,000 Hours Expected Lifetime
• Extremely Durable
• Mounting Tab on Each End
• PlashLights Full Lifetime Warranty
• 6000K Cool White

*NOTE - Over voltage will permanently damage the light strip (15+ V)

* It is recommended to secure (fasten or embed in silicone) the center of the longer aluminum channels to prevent movement.

Waterproof LED Channel is a Linear LED light bar fixtures that is a very versatile solution for a variety of lighting needs. This includes under gunnel lighting for boats, hatch lighting, cutting board work areas, tool box lighting, cabinet lighting, under-cabinet lighting, desk lighting, bookshelf lighting, showcase lighting, truck bed lighting, RV ceiling lights, and many more.

Aluminum channels are a crucial part of any linear LED fixture. They act as a durable, lightweight housing for LED strip lighting of any color temperature, color, or output. Most importantly they act as the primary source of thermal management for your LED strips.

This 3/4" wide aluminum LED light bar emits up to 710 lumens per foot and is available in many color options as well as RGB, dual-color, and custom OEM designs. This waterproof light fixture has 12 VDC operation and is equipped with a 3 ft black insulated power wire on one end and mounting tabs on both ends for easy installation.  Mounting hardware sold separately.

Great for: Boats, Docks, Outdoor Bars & Patios, Bathrooms, Kitchens, Swimming Areas, Steps, Coves, Under Cabinets, Side by Sides, Work Trucks, Tool Boxes, Truck Beds, Amp Steps.

Dimensions: 3/4" WIDE (18mm)  x  1/2" TALL (12mm)  x  LENGTH ORDERED

Specifications:

• IP68 Waterproof
• Fully Potted - UV Rated
• 9ft. Black Insulated Power Cord Included 
• 12 Volts DC Input 
• Amp Draw: 0.275A / per foot @ 12V
• High Quality / High Output LED's - Will Not Go Out Premature (Like Others)
• RGB Multi Color Light
  
• 30,000 Hours Expected Lifetime
• Extremely Durable
• Mounting Tab on Each End
• PlashLights Full Lifetime Warranty

*NOTE - Over voltage will permanently damage the light strip (15+ V)

* It is recommended to secure (fasten or embed in silicone) the center of the longer aluminum channels to prevent movement.

Waterproof LED Channel is a Linear LED light bar fixtures that is a very versatile solution for a variety of lighting needs. This includes under gunnel lighting for boats, hatch lighting, cutting board work areas, tool box lighting, cabinet lighting, under-cabinet lighting, desk lighting, bookshelf lighting, showcase lighting, truck bed lighting, RV ceiling lights, and many more.

Aluminum channels are a crucial part of any linear LED fixture. They act as a durable, lightweight housing for LED strip lighting of any color temperature, color, or output. Most importantly they act as the primary source of thermal management for your LED strips.

This 3/4" wide aluminum LED light bar emits up to 710 lumens per foot and is available in many color options as well as RGB, dual-color, and custom OEM designs. This waterproof light fixture has 12 VDC operation and is equipped with a 3 ft black insulated power wire on one end and mounting tabs on both ends for easy installation.  Mounting hardware sold separately.

Great for: Boats, Docks, Outdoor Bars & Patios, Bathrooms, Kitchens, Swimming Areas, Steps, Coves, Under Cabinets, Side by Sides, Work Trucks, Tool Boxes, Truck Beds, Amp Steps.

Dimensions: 3/4" WIDE (18mm)  x  1/2" TALL (12mm)  x  LENGTH ORDERED

Specifications:

• IP68 Waterproof
• Fully Potted - UV Rated
• 9ft. Black Insulated Power Cord Included 
• 12 Volts DC Input 
• Amp Draw: 0.275A / per foot @ 12V
• High Quality / High Output LED's - Will Not Go Out Premature (Like Others)
• RGBW Multi Color Light
  
• 30,000 Hours Expected Lifetime
• Extremely Durable
• Mounting Tab on Each End
• PlashLights Full Lifetime Warranty

*NOTE - Over voltage will permanently damage the light strip (15+ V)

* It is recommended to secure (fasten or embed in silicone) the center of the longer aluminum channels to prevent movement.

Waterproof LED Channel is a Linear LED light bar fixtures that is a very versatile solution for a variety of lighting needs. This includes under gunnel lighting for boats, hatch lighting, cutting board work areas, tool box lighting, cabinet lighting, under-cabinet lighting, desk lighting, bookshelf lighting, showcase lighting, truck bed lighting, RV ceiling lights, and many more.

Aluminum channels are a crucial part of any linear LED fixture. They act as a durable, lightweight housing for LED strip lighting of any color temperature, color, or output. Most importantly they act as the primary source of thermal management for your LED strips.

This 3/4" wide aluminum LED light bar emits up to 710 lumens per foot and is available in many color options as well as RGB, dual-color, and custom OEM designs. This waterproof light fixture has 12 VDC operation and is equipped with a 3 ft black insulated power wire on one end and mounting tabs on both ends for easy installation.  Mounting hardware sold separately.

Great for: Boats, Docks, Outdoor Bars & Patios, Bathrooms, Kitchens, Swimming Areas, Steps, Coves, Under Cabinets, Side by Sides, Work Trucks, Tool Boxes, Truck Beds, Amp Steps.

Dimensions: 3/4" WIDE (18mm)  x  1/2" TALL (12mm)  x  LENGTH ORDERED

Specifications:

• IP68 Waterproof
• Fully Potted - UV Rated
• 9ft. Black Insulated Power Cord Included 
• 12 Volts DC Input 
• Amp Draw: 0.275A / per foot @ 12V
• High Quality / High Output LED's - Will Not Go Out Premature (Like Others)
  
• 30,000 Hours Expected Lifetime
• Extremely Durable
• Mounting Tab on Each End
• PlashLights Full Lifetime Warranty
• 3500K Warm White

*NOTE - Over voltage will permanently damage the light strip (15+ V)

* It is recommended to secure (fasten or embed in silicone) the center of the longer aluminum channels to prevent movement.

• Curved Housing
• 5W OSRAM® OSLON LX ECE LED’S
• Extruded 6063 Aluminum Body
• AkzoNobel® Marine Polyester Powdercoat Coating
• Available in White or Black
• Durable Scratch Resistant High Impact Polycarbonate Lens
• 316 Stainless Steel Hardware and Fasteners with Nylon Locking Nuts
• 9~36VDC Input • Genuine Gore® Waterproof Membrane with Mechanical Seal
• Over / Under and Reverse Polarity Protectiton
• Protected Against Electromagnetic (EMC) and Radio Frequency Interference (RFI)
• 50,000 Hours or 5 Years of Continuous Use
• Operating Temp: -40°F ~ +145°F
• MIL810-STDG Vibration Compliant
• ROHS Compliant
• Printed Logo - No Exposed Aluminum

• 5W OSRAM® OSLON LX ECE LED’S
• Extruded 6063 Aluminum Body
• AkzoNobel® Marine Polyester Powdercoat Coating
• Available in White or Black
• Durable Scratch Resistant High Impact Polycarbonate Lens
• 316 Stainless Steel Hardware and Fasteners with Nylon Locking Nuts
• 9~36VDC Input • Genuine Gore® Waterproof Membrane with Mechanical Seal
• Over / Under and Reverse Polarity Protectiton
• Protected Against Electromagnetic (EMC) and Radio Frequency Interference (RFI)
• 50,000 Hours or 5 Years of Continuous Use
• Operating Temp: -40°F ~ +145°F
• MIL810-STDG Vibration Compliant
• ROHS Compliant
• Printed Logo - No Exposed Aluminum

This popular LED strip light has 60 very bright LED triplex nodes per meter. It's very bright and waterproof. It fits perfectly in many different types of applications such as under boat gunnels and decks, outside patios and bars, under vehicles, and even in pool houses.

• IP68 Waterproof
• 9ft. Black Insulated Power cord included
• 12 Volts DC input @ 72 Watts (300 Diodes)
• *NOTE - Over-voltage will permanently damage the light strip
• Cuttable in segments
• UL Rated (rating is lost if cut or modified) & RoHS
• 50,000 hours expected lifetime
• Extremely Durable
• Included in each package: Rubber tie downs, 2 caps for dead ends.
• Wide applicability, easy to install and maintain
• Very flexible, can easily be curved
• Extremely luminous, with wide viewing angle
• Very bright 5050 LED's with a low power consumption
• Long lifespan expectancy of 50,000 hours
• Fully Dimmable

• 90° True Flood Beam Pattern
• 21,600 Raw Lumens
• IP67 rated
• 36pcs x 5W OSRAM LED's (4pcs per reflector)
• 10.0A @ 12V / 5.0A @ 24V
• Integrated Temperature Control System (TCS)
• The TCS will lower the light output depending on environmental temperatures to protect the light and keep it a the maximum output (36W minimum - 180W maximum)
• Chrome Coated Hardware
• Heavy Duty U Shaped Mounting Bracket Include a 12 inch dual insulated power wire with female Deutsch connector and a male connector with 8 inches of power wire
• Wiring Harness NOT Included

PlashLights 20W Flood Low Profile light is the perfect compact light with a compact price! This small 20W light is available in three different beam patterns and is perfect for any auto, ATV/UTV or marine application. This light is TWICE as bright as our competition. Also, it fits perfect as a backup light for a Jeep JK.

• 2 X 10W CREE® LEDs = 20W Total
• 35° Linear Flood or 120° Scene Flood
• Lumens: 2600 (each light)
• 9 ~ 36VDC 1.6A @ 12VDC
• IP69K Rated
• 316 Stainless Steel Hardware
• DuPont Coating
• Certificates: CE, RoHS, UV, Vibration, RF Anti-Interference, Salt
• LED Lifespan: 50,000 hours or 5 years of continuous use
• Operating Temp: -40° F ~ +145°F
• NEW: Includes 9ft Black Insulated Power Wire for an Easy Install

PlashLights 40W Cube Marine Light is the perfect LED light for your boats deck or work area! This light is extremely durable. Tested and designed for saltwater applications. This small 40W light is available in three different beam patterns, but it is recommended to use the 160° diffused beam pattern as a spreader application. If distance is needed then the linear flood or spot beam shall be used.

• 10W CREE® LEDS
• 10° Spot Beam, 35° Linear Flood, 160° Diffused Beam
• 5200 Lumens / Each
• 9-36 Volt DC
• IP69k Rated
• Extruded aluminum body with
• DuPont® coating
• Durable scratch resistant high impact polycarbonate lens 96% optical/reflector efficiency
• Genuine Gore® waterproof membrane with mechanical seal
• Deutsch® waterproof connectors - The best connectors available
• Over / Under and reverse polarity protection
• Protected against electromagnetic (EMC) & radio frequency interference (RFI)
• LED Lifespan: 50,000 hours or 5 years of continuous use
• Operating Temp: -40°F ~ +145°F (Ambient)
• NEW 316 Stainless Steel bracket, hardware and fasteners with nylon locking nuts 8.6g vibration compliant
• CE and RoHS certified
• Includes Wiring Harness (waterproof in-line fuse, relay, rocker switch, waterproof connector, battery terminals)

PlashLights 40W Low Profile Marine LED Spreader Light is the perfect LED light for your boats deck or work area! This light is extremely durable. Tested and designed for saltwater applications. This small 40W light is available in three different beam patterns, but it is recommended to use the linear flood beam pattern as a driving or fishing light application.

• 4 X 10W CREE® OSLON LX ECE LED’s = 40W Total
• 120° Scene Flood or 35° Linear Flood
• Lumens: 5200
• 9 ~ 36VDC3.2A @ 12VDC
• IP69K Rated
• 316 Stainless Steel Hardware
• 9ft. Power Wire for easy T-Top Install - No Connector
• DuPont® Marine Black or White Coating
• Certificates: CE, RoHS, UV, Vibration, RF Anti-Interference, Salt
• LED Lifespan: 50,000 hours or 5 years of continuous use
• Operating Temp: -40° F ~ +145°F

Surface mounted Deck Lights with an aluminum housing are dependable and very well built. I would say that they are indestructible, but I know how some of you are so I will refrain from that comment. They are super bright and made to last. These are the highest quality deck lights on the market.

Specifications:

• 3" width x 1-5/8" height x 3/8" depth , bolt hole center to center 2"
• 3W CREE® LED’s - 9W Total
• Lumens: 1,240
• 50,000 Hours Average Lifespan
• Includes a Flat Rubber Mount. 
• Optional 45° Angle Mount Sold Separately
• AkzoNobel® Polyester Powder Coat Coating
• Available in Black or White Housing
• Aluminum Housing
• Operating Temp: -40°F ~ +165° F
• Certificates: CE, RoHS, UV, Salt Spray, Vibration, RF Anti Interference
• IP68 Rated
• PlashLights Lifetime Warranty
• Each Light Includes: Two Insulation Bushings, 316 Stainless Steel Hardware, Flat Rubber Mount, 3ft Power Wire

Super compact and indirect, yet bright and efficient lighting for passageways, steps, or compartments make these LED lights ideal. The curved reflector design directs light downward, therefore eliminating any glare effect and maximizing your illumination while only protruding 3/8”.

• Light Style: Step Light
• Housing Material: Aluminum or 316 Stainless Steel
• Draw: 140mA @ 12VDC
• Voltage: 12VDC
• Lumens: 32 (61Lx @ 1 ft.)
• Viewable Angle: 150°
• Fixture Dimensions: 7/8” dia.
• Mounting Style: Press fit
• Required Cutout: 5/8” dia. (with 1-1/4” bulkhead clearance)
• 1" Diameter, 1.1" depth from flange.
• Finished Clearance: 3/8”
• Wiring: Two-conductor, 20-gauge marine grade (9ft. cable supplied)
• Environment: Prolonged marine: Waterproof & Submersible (IP68 rated)
• Warranty: Limited Lifetime

These Single Row Series Light Bars now allow you to put a light bar in the location that a double row will not fit. You can expect the same great quality from these light bars as you do from all of Plash products! The Single Row Series Light Bars feature 5W OSRAM LEDs and are simple to mount! Made with a 316 stainless steel bracket and a double nut feature that ensures stability and safety of the light. Lights have black housings except on models noted below with white housing. 6000K white LED lights.

XX-Series lens covers are designed specifically for the XX-Series double row light bars. Each cover is 10 " in length. Multiple covers will be required for longer bars. Covers are made of PC and snap on. They are durable and will not come off. No tools required. Sold individually.

PlashLights waterproof Bluetooth controller is operated via a mobile phone app to turn on/off,  adjust the brightness or color, adjust color temperature, and change preset color patterns. There are a variety of lighting patterns to choose from.

The operation is very simple with mobile phone control (IOS or Android).  Your phone is not needed when a switch is installed as the lights will defer to the last setting when powered on (Example:  If you have them on a blue stobe pattern and turn the power of at a switch or the Perko, when power is applied at a later date the lights will be on blue strobe).  Basically, your phone is only required to change the color or patterns.

• Requires download of PlashLights APP (FREE)
• Simple to mount with a tab on each side
• IP67 Rated Enclosure = Waterproof
• Easily control and synchronize up to 240 Watts of lighting
• 15A when RGB used (5A/per channel)  
• 20A when RGB+W used (5A/per RGB channel & 5A white)
• Compatibility: bluetooth 4.0 (bluetooth phones of 4.0 or above)
• Supports mobile phone system: IOS 6.0 android 4.3 or above
• Operating  Voltage: 12~24V DC
• Software language: English
• Control distance: 65 feet 
• Size: 3-13/16" long x 1-1/4" tall x 1-15/16" wide
• Working temperature: - 4°F to 145°F

Long LED Light bars can resonate in the wind. If you are experiencing a lot of wind noise from your large LED Light bars, it could be from the cooling fin resonance (vibration) from the wind. These isolators snap in between the cooling fins to stop the vibrating resonance noise. We recommend 1 every 10" or so. Made from non-hardening rubber. Made to fit our XX-Series, MX-Series, CX-Series light bars, but also fits Rigid Industries light bars. These are a perfect fit with no modifications required. Eliminates Whistle, Harmonics, Noise, Rattles etc. about 90%. ***Sold Individually*** Warning! They fit very tight, so you will have to wrestle them in a bit, but hey, you're no sissy! You can take 'em!

6 Foot Flat Molding Strip For LED Light Strips

Don't settle for just one color from your LED lights! These UL approved LED light strips do it all! When paired with WiFi Control Box and your iPhone or Android smartphone, these lights can change into an array of colors! Without the WiFi box, they can also be wired to shine permanently in multiple combinations (see wiring specs). These LED strips range from 3-27 Feet and can be cut to fit perfectly.

It's easy to create energy-efficient, innovative accent lighting and general illumination for your boat, dock, trailer or truck with LED strip lighting. We offer a huge selection of RGB color changing LED light panels and LED strip lights that will give your boat and more the visual appeal to create a huge waves. Virtually all our LED strips are UL-listed, so you know it's safe, and versatile.