Batteries & Accessories - Circuit Breakers, Relays & Fuse Holders

ATO/ATC Fuse 3 Amp

The Seadog Automotive Style Fuses have a tin plated copper and injection molded nylon construction.

• Type: ATO/ATC
• Size: 3/4"L x 3/4"W
• Fuses per pack: 5

ATO/ATC Fuse 5 Amp

The Seadog Automotive Style Fuses have a tin plated copper and injection molded nylon construction.

• Type: ATO/ATC
• Size: 3/4"L x 3/4"W
• Fuses per pack: 5

Fuse Maxi 60-Amp

Blue Sea System MAXI Fuses have silver-plated connector blades for corrosion resistance and provide economical circuit protection. They have convenient visible indication of blow condition.

Features:
• 32V DC maximum

ATO/ATC Fuses 15 Amp

The Seadog Automotive Style Fuses have a tin plated copper and injection molded nylon construction.

• Type: ATO/ATC
• Size: 3/4"L x 3/4"W
• Fuses per pack: 5

AGC Fuses 10 Amp (5/Set)

The Seadog Glass Tube Fuses have a nickel plated brass and glass construction.

• Type: AGC
• Size: 1/4" diameter x 1-1/4" length
• Fuses per set: 5

AGC Fuses 15 Amp (5/Set)

The Seadog Glass Tube Fuses have a nickel plated brass and glass construction.

• Type: AGC
• Size: 1/4" diameter x 1-1/4" length
• Fuses per set: 5

AGC Fuses 20 Amp (5/Set)

The Seadog Glass Tube Fuses have a nickel plated brass and glass construction.

• Type: AGC
• Size: 1/4" diameter x 1-1/4" length
• Fuses per set: 5

ATO/ATC Fuse Kit

Seadog ATO/ATC Style Mixed Fuse Kit contains 3, 5, 7, 10, 15 and 20 amp fuses.

• Size: 3/4"L x 3/4"W
• Tin plated copper and injection molded nylon construction
• 5 each of every amp fuse

Boot Reset Button Clear 2/Pk

Blue Sea Systems Waterproof Boot Reset Buttons replace the standard mounting nut for Blue Sea's Thermal Push Button Circuit Breakers. They protect circuit breakers in wet environments and the silicone rubber construction is UV resistant and will resist discoloration and cracking.

Features:
• Boot threads: 3/8"-27 nickel-plated brass
• Two per package

Battery Terminal Fuse 50-Amp

Blue Sea Systems Terminal Fuses are Marine Rate and designed for various applications with up to 300 AMP loads. Their high interrupt rating satisfies ABYC requirements for DC main circuit protection. For ease of use, there is a window that indicates blown condition, and each amperage is color coded for easy identification.

BATTERY TERMINAL COVERS 1/2"DIA

Seadog Battery Terminal Covers are constructed of injection molded PVC and meet USCG requirements and the American Boat and Yacht Council recommendations for prevention of accidental groundings. They will fit most marine batteries and automotive batteries with add-on marine terminals. Set of 2.

Features:
• Size: 1-5/8"W x 2-7/8"L
• Color: Red and black
• Cable gauge: 4, 2, 1

BATTERY CLIPS 10A

The Seadog Aligator Battery Clips are stamped copper plated steel.

Features:
• Type: 10 Amps
• Length: 3"

Automatic Charging Relay "ACR"

Blue Sea System SI-Series Start Isolation Automatic Charging Relay automatically isolates batteries during starting to protect sensitive electronics and manages the charging of two battery banks. The 120 AMP continuous rating supports the high-output alternators. LED light indicates when batteries are combined and blinks when the undervoltage or starting isolation feature is engaged.

Features:
• Side and bottom knockouts for power cable connections
• Clip-on cover protects terminal connections
• 1/4" x .031" male quick connect terminals for ground, optional remote LED and starting isolation
• Start Isolation (SI) can be configured for temporary isolation of house loads from engine circuit during engine cranking to protect sensitive electronics
• 12/24 volt auto ranging voltage input
• Hermetically sealed contacts/vaporproof
• Remote LED output indicates relay state away from ACR (required optional LED)
• Senses charging on two battery banks
• Intermittent rating: 5min. = 210 AMPS
• Continuous rating = 120 AMPS
• Amperage operating current = 15mA
• Maximum cable size = 1/0 AWG
• Amperage operating current -
• 12 Volts DC = 175mA
• 24 Volts DC = 115mA

Inline ATO/ATC Fuse Holder

The Inline ATO/ATC Fuse Holder has an injection molded fiberglass reinforced nylon construction.

• Amps: 30
• Wire length: 4" each side

Inline Auto Style Fuse Holder

• Wire length: 3-1/2"
• Maximum amps: 20
• Injection molded PVC

Inline Fuse w/20 Amp Fuse

• Wire size: 14 gauge
• Wire length: 11-1/2"/side
• Fuse size: 1/4" x 1-1/4"
• Injection molded nylon construction
• Includes 20 amp fuse

Fuse Holder 3AG Water Resistant 

The Blue Seas Systems 3AG Water Resistant Fuse Holder replaces the fuse holder found in Contura waterproof fuse panels. It will withstand the water exposure normally encountered in above the deck applications; salt spray, rain, hose washdowns, and momentary immersions.

Features:
• Max voltage: 32V DC
• Max amperage: 20 Amperes
• Easy to open
• IP66 protected against powerful water jets
• Mounting hole diameter: 0.50" (12.70mm)

Fuse Holder w/Push-In Cap

• Thread depth: 1/4"
• Fuse diameter: 19/32"
• Release location: Side
• Fuse size: 1/4" x 1-3/4"
• Stamped brass/molded Bakelite

Fuse Holder Waterproof ATO/ATC

The Blue Sea Systems Waterproof In-Line ATO/ATC Fuse Holder is equipped with 12 AWG pigtails and can be used with ATO or ATC fuses with a 30A maximum amperage.

Fuse Block STblade Bottom 4 circuit Kit

The Blue Sea Systems ST-Blade Battery Terminal Mount Fuse Block Kit is designed to allow easy installation of 4 ATO/ATC fused circuits. It features a ST-Blade battery terminal mount fuse block with 4 screw terminals for securing wire and mounts on the battery terminal stud. It also has a battery positive ground bar with 4 screw terminals.

Features:
• Maximum amperage: 100/Block, 30/Circuit
• Maximum voltage: 32VDC
• Circuits: 4
• Mounting: Clearance for 3/8" stud
• Screw terminal type: #8-32 Screw with captive star lock washer
Included:
• ST-Blade battery terminal mount fuse block
• ATO/ATC 15A Fuse
• (8) Nylon insulated ring terminals
• Battery terminal mount busbar
• Insulating covers