135-20000 High Speed Saginaw Style Power Steering Pump - 1500 PSI
This all new performance power steering pump is a direct replacement for most GM P-series Saginaw OEM power steering pumps. These pumps produce an increase of pressure thus aiding in low speed steering response.
NOTE: Reservoir is sold separately.
Why is this pump better?
- The bearing snout is machined to replace the stock bronze bushing with #203 needle bearing.
- The shaft is machined from 4140 tool steel and is heat treated to 75/80 Rockwell. Will not break if you dead head the pump.
- The shaft has dual thrust washers to insure control forward and rear movement when under load.
- The main boring housing is machined to a larger diameter to clean up wore surface. Larger ring, rotor and vanes are installed.
- The main oil passage is enlarge for greater flow
- Flow valve bore is machined larger. Unit comes with larger valve and spring.
- Our pumps flows 4-3/4 to 5-1/4 GPM. Double the output than a stock Saginaw "P" series pump.
- Comes with new o-rings for installation
|
|
135-20001 Crossover Mount Power Steering Pump with Hub, No Pulleys
New Hardin "Evolution Series" Power Steering pumps, Pulleys, and brackets:
HardinMarine, Has expanded their offerings of power steering pumps andcomponents for marine use. With the demise of the original small caststyle KRC steering pumps came a void in the marine market to support acompact size remote reservoir style of power steering pump that could becommonly mounted on performance based marine engines.
Hardin Marine knew that not only could they step to fill this void,they could create a pump offering with the long sought after additionalvolume capacities that would also retro-fit earlier applications.This increased volume would provide for faster more responsive steeringat all speeds as well as a great docking manners. The New EvolutionSeries of power steering pumps delivers 4.1 Gallons of fluid per minuteat a mere 800rpms. That is nearly a gallon or 25% more flow than previousofferings. This pump features the common -10 inlet and -6 outletpressure side fittings.
|
|
135-20003 Complete Crossover Mount Power Steering Pump
New Hardin "Evolution Series" Power Steering pumps, Pulleys, and brackets:
Hardin
Marine, Has expanded their offerings of power steering pumps and
components for marine use. With the demise of the original small cast
style KRC steering pumps came a void in the marine market to support a
compact size remote reservoir style of power steering pump that could be
commonly mounted on performance based marine engines.
Hardin Marine knew that not only could they step to fill this void,
they could create a pump offering with the long sought after additional
volume capacities that would also retro-fit earlier applications.
This increased volume would provide for faster more responsive steering
at all speeds as well as a great docking manners. This pump features the common -10 inlet and -6 outlet
pressure side fittings.
|
|
135-20012 Mercruiser Replacement Style Saginaw Power Steering Pump
This
is an all new high performance power steering pump designed as a
replacement for
most mercury and mercruiser style steering pumps. This pump features
numerous improvements over the factory unit. These pumps produce
an increase of pressure thus aiding in low speed steering response.
Why is this pump better than a OEM stock pump?
- The bearing snout is machined to replace the stock bronze bushing with #203 needle bearing.
- The shaft is machined from 4140 tool steel and is heat treated to 75/80 Rockwell. Will not break if you dead head the pump.
- The shaft has dual thrust washers to insure control forward and rear movement when under load.
- The main boring housing is machined to a larger diameter to clean up wore surface. Larger ring, rotor and vanes are installed.
- The main oil passage is enlarge for greater flow
- Flow valve bore is machined larger. Unit comes with larger valve and spring.
- Our pumps flows 4-3/4 to 5-1/4 GPM. Double the output than a stock Saginaw "P" series pump.
- 1500 PSI max
- Sold
Complete with black housing, pump, vented cap, 3/8" barb inlet, 5/8" -
18 female inlet, press on pulley or flange not included, no keyway
|
|
135-20020 KRC Pro Series III Power Steering Pump
KRC Pro Series III Power Steering Pump 5.9CC W/ 17 Spline & Threaded Shaft for Pulley. Pulley Sold Separately. STD -10 Inlet W/ STD -6 Flow Control Fitting. KRC Series III Pumps are quickly adjustable for the ultimate in driver feel. Weighs on 2.58 lbs. & draws up to 50% less HP than competing pumps. 3.1 GPM
|
|
137-9037 Power Steering Filter
- 3/8" NPT Inlet & Outlet
- 5" Length
- 1-1/2" Width
This filter is a high pressure low micron filter and is one of the best we've seen. This filter is an excellent accessory for any performance boat with external steering.
|
|
137-9038 Power Steering Filter Element for 137-9037
- Replacment filter element only.
|
|
135-20002 Pulley for Crossover Mount Power Steering Pump
Replacement pulley for 135-20001 or 135-20003 pumps.
Hardin
Marine, Has expanded their offerings of power steering pumps and
components for marine use. With the demise of the original small cast
style KRC steering pumps came a void in the marine market to support a
compact size remote reservoir style of power steering pump that could be
commonly mounted on performance based marine engines.
|
|
135-20008 3.5" Pulley for Power Steering Pump with Splined Shaft
Fits KRC Power Steering Pumps with Splined Shaft
|
|
625-8168 Power Steering Pump, Pulley, Reservoir & Billet Port Cylinder Head Mount Kit
This kit offers all the necessary components to
add a complete power steering pump assembly to your engine. This
performance inspired pump produces 1200 psi at 800 RPM and 1500 psi at 1200 RPM. This pump
features an oil reservoir attached to the pump and uses the popular JIC style
fittings for ease of installation. A precision machined billet cylinder
head mounting bracket and Tru-Trac billet V-groove pulley are included.
|
|
135-20005 Can ONLY for Saginaw Style Power Steering Pump
PUMP NOT INCLUDED!
|
|
625-8109 Upper Port Side Power Steering Mounting Bracket Assembly - BBC Head Mount
This power steering mounting bracket is designed for a upper port side
mount on big block Chevrolet engines. This heavy duty aluminum bracket is anodized black for corrosion protection (Note: picture shows satin finish). This bracket accepts most
popular GM power steering pumps and is supplied with the necessary mounting
hardware.
|
|
625-8108 Upper Port Side Power Steering Mounting Bracket Assembly - BBC Head Mount for Hardin Closed Cooling
This power steering mounting bracket is designed for a upper port side
mount on big block Chevrolet engines. This heavy duty aluminum bracket is anodized black for corrosion protection (Note: picture shows satin finish). This bracket accepts most
popular GM power steering pumps and is supplied with the necessary mounting
hardware.
|
|
620-910080 Upper Starboard Side Power Steering Mounting Bracket Assembly - Fits B/B Chevrolet
This power steering mounting bracket is designed for a upper starboard side
mount on big block Chevrolet engines. This heavy duty steel bracket is
powder coated black for corrosion protection. This bracket accepts most
popular GM power steering pumps and is supplied with the necessary mounting
hardware.
|
|
135-20007 Replacement seals for High Speed Saginaw Style Power Steering Pump #135-20000
Replace worn out O-Ring seals with this kit.
|
|