625-8171 Billet Aluminum Power Steering Reservoir Dump Cap - 1/4" NPT Thread
|
|
135-1010 Power
Steering Return Dump Cap
This is the ultimate fluid return reservoir cap. No
welding is required. This is one of the many features in
our standard kit that makes ours better We actually
do installation, so we actually know what fits, and
what doesn't. Return fitting thread size is 1/4" NPT. NOTE: Only fits stock Mercury Power Steering Tanks. Does not fit any of our aftermarket tanks.
|
|
137-9485 Replaces Mercury OEM #846446
New from Mayfair by Hardin Marine upgraded end cap gland for all Mercury Racing #6, #7, NXT1 transoms. This upgraded end cap gland has dual inner wiper seals, an upgrade over the single wiper seal of Mercury to eliminate leaky cylinders. Machine from USA navel bronze bar. This replaces the Mercury racing # 846446 that has been discontinued by Mercury.
|
|
137-9301 Hydraulic Hose -6
These are the best choice for flexible hose in custom installations. We sell these hydraulic hoses in bulk lengths so you can cut it to the exact lengths needed for your boat. Then install reusable hose ends with appropriate mandrels. These hoses are used for high pressure runs, and have a black rubber covering with wire braid reinforcement inside.
Priced and sold per foot.
|
|
137-9158 Remote Reservoir Hose Kit
Includes Fittings
|
|
137-9267 Dual Cylinder Steering Hose Kit
- Two 22" Inside Hoses
- Two 63" Inside Hoses
- Two 1/4 NPTX-6 JIC Tee Fittings
- Two 1/4 NPTX-6 JIC 90 Degree Fittings
|
|
135-1050 External Hydraulic Stainless Steel Dual Cylinder Steering Line Kit
This kit is standard equipment with Hardin Marine hydraulic steering systems But if your boat was originally equipped with rubber lines, this is the ultimate upgrade and really finishes off a professional installation. 16" Long Hoses, -6 Fittings.
|
|
135-1051 External Hydraulic Stainless Steel Single Cylinder Steering Line Kit
This kit is standard equipment with Hardin Marine hydraulic steering systems But if your boat was originally equipped with rubber lines, this is the ultimate upgrade and really finishes off a professional installation. 16" Long Hoses, -6 Fittings.
|
|
137-9232 Mayfair 16" 316 SS Braided Hose Assembly Long
This hose is used in the Mayfair steering systems from the cylinder to the thru hull.
|
|
137-9288 Mayfair 22" 316 SS Braided Hose Assembly Long
This hose is used in the Mayfair steering systems from the cylinder to the thru hull.
|
|
135-1040 Brazilian
Steering Manifold
This adapter was designed to aid in the installation of
an add-on hydraulic steering system on boats
manufactured 1994 and later equipped with a Brazilian shuttle valve. Same as Imco HCK17. Manifold, Fittings and O-Rings included. See related parts for replacement parts if needed.
|
|
625-2122 Brazil Valve Fitting, 1/8" NPT x -6 AN, Brass (Each)
Replacement fittings for Brazil Valve Manifold. Sold Each.
|
|
135-1041 Replace your worn out O-Rings in your Brazilian Manifold with the ones in this kit!
|
|
135-1070 Saginaw Shuttle Valve Fitting (Pair)
These fittings were developed to assist in the plumbing
of your Saginaw shuttle valve in pre-1994 applications
These are custom built for just this application
|
|
421-PT-13 Twin Engine, Twin Power Steering Pump Priority Valve
Connects 2 engines / 2 power steering pumps (high pressure / return). Has -6 AN brass connections. Hard anodized billet body.
|
|
135-1045 -4 AN Stainless Steel Bulkhead Thru-Hull Fitting
This thru-hull with its one-piece construction will not lead as two-piece thru-hulls are prone to do. It gives a finely finished look to any installation. This bulkhead fitting has a 1/8" NPT internal female thread and the external bulkhead thread area is 2-1/2" long.
|
|
135-1060 -6 AN Stainless Steel Bulkhead Thru-Hull Fitting
This thru-hull with its one-piece construction will not lead as two-piece
thru-hulls are prone to do. It gives a finely finished look to any
installation. This bulkhead fitting has a 1/4" NPT internal female
thread and is 3-1/2" long
|
|
|
|
137-9551 Stainless Steel Extension Box Steering Ram Mounting Bracket
These super duty constructed 316L stainless steel brackets are designed so
that a space saver full hydraulic steering system can be mounted many popular
outdrive style extension boxes.
|
|
|
|