620-921018
- Marine grade stainless steel & aluminum construction
- 12 DC sealed electric motors, 2-wire simple hook-ups
- Compact Size, Light Weight, for Maximum Lifting Capacity
- Two Standard Length Cylinders with Simple Pin Mounts
- Heavy Duty Aluminum Clevis Mounts for Hatch and Stringer
- Smooth Quiet Responsive Hydraulic Action with No-Coasting
- Moving Capacity 500 lbs. on horizontal surface. Will lift 250lb hatch when mounted vertically.
- 1” Cylinder.
- System is virtually maintenance free
- Operating Temperatures 10 to 165 Degrees F
- System can Operate with Environmentally Responsible Fluid
- 18" Model Dimensions: 26” Retracted Length, 44” Extended Length.
- NOTE: The 620-920016 is only bracket kit that will work with this ram. Most Brackets, pins and accelerators sold separately in the section WILL NOT WORK with this actuator.
|
|
620-921024
- Marine grade stainless steel & aluminum construction.
- 12 DC sealed electric motors, 2-wire simple hook-ups.
- Compact Size, Light Weight, for Maximum Lifting Capacity.
- Two Standard Length Cylinders with Simple Pin Mounts.
- Heavy Duty Aluminum Clevis Mounts for Hatch and Stringer.
- Smooth Quiet Responsive Hydraulic Action with No-Coasting.
- Moving Capacity 500 lbs. on horizontal surface. Will lift 250 lb hatch when mounted vertically.
- 1” Cylinder.
- System is virtually maintenance free.
- Operating Temperatures 10 to 165 Degrees F.
- System can Operate with Environmentally Responsible Fluid.
- 24" Model Dimensions: 32” Retracted Length, 56” Extended Length.
- NOTE: The 620-920016 is only bracket that will work with this ram. Most Brackets, pins and accelerators sold separately in the section WILL NOT WORK with this actuator.
|
|
602-CYL18 FOR USE ACTUATING HATCHES OR DOORS
26" Retracted Length With An 18" Stroke
44" Extended Length
6063T832 Hard Coat Anodized Aircraft Grade Aluminum Tube 1" Bore With 5/8" Stainless Steel Shaft.
Double Acting Cylinder, Power-Up/Power-Down For Mounting Use CM100 Stainless Steel Clevis
|
|
602-CYL24 32" Retracted Length With A 24" Stroke
56" Extended Length
6063T832 Hard Coat Anodized Aircraft Grade Aluminum Tube 1" Bore With 5/8" Stainless Steel Shaft.
Double Acting Cylinder, Power-Up/Power-Down.
|
|
620-920016
- Highly polished heavy gauge stainless steel.
- Sold Each.
- Fits Hardin Marine hydraulic hatch actuators.
- Includes a 1/2" stainless steel actuator mounting bolt, washers, bushings and locknut.
- Fasteners for mounting the bracket to the boat and hatch are NOT included.
- Replaces 602-CM100
|
|
620-920011
- Stainless steel pin and billet aluminum handle.
- Designed to be used in conjunction with the Hardin Marine hatch rams and mounting brackets.
- Quick and easy way to release the hatch ram for hatch removal or full range opening.
- Can also be used to release the hatch ram in the event of battery failure provided you have an access panel within easy reach of the pin.
|
|
620-921013
- Lessens stress put on mounting bracket.
- Prevents damage to your mounting bracket.
- Stops the hatch ram from over-contracting.
- Only to be used on 620-921018 and 620-921024.
ID: 1 1/4”
OD: 5/8”
|
|
602-PT417N Complete Power Unit with Bulkhead Mount Plate and Relays.
Wired ready to hook up.
This pump is to be used with 2 CYL18 or CYL24 cylinders to make a hatch lift system that can lift up to 1,000 LBS.
This system make a great replacement for electric hatch lifters that have failed. Requires 4 Hoses & 4 CM100 Clevis Mounts
|
|