Add-On Kits - IMCO Marine

Dual Ram Power Steering for Dual Alpha Applications 9" Narrow Mount

The IMCO Standard Dual Ram Power Steering System is intended for Dual Alpha powered recreational performance sport boats. The system consists of through-transom hydraulic port bracketry with all necessary hose, fittings, fasteners, aluminum drive end caps and stainless braided line Once installed, boat drivers will experience significantly more precise steering control, especially at higher speeds. This kit has a narrower mount for applications with limited horizontal clearance.

Do it yourself. Install a dual ram steering system in approximately six hours or less.

Note: These kits contain non-assembled rubber hoses and brass fittings. See steering component section for stainless steel braided line options.

Requires Installation Kit:

421-HK-11, Brazilian manifold style, 1994 and later.
421-HK-9, Saginaw fitting style, 1994 and earlier.

For parts list, and to buy replacement parts click here

Dual Ram Power Steering for Alpha Applications 10.5" Standard Mount

The IMCO Dual Single Ram Power Steering System is intended for Alpha powered recreational performance sport boats. The system consists of through-transom hydraulic port bracketry with all necessary hose, fittings, fasteners, aluminum drive end caps and stainless braided line Once installed, boat drivers will experience significantly more precise steering control, especially at higher speeds.

Do it yourself. Install a dual ram steering system in approximately five hours or less.

Note: These kits contain non-assembled rubber hoses and brass fittings. See steering component section for stainless steel braided line options.

Requires Installation Kit:

421-HK-11, Brazilian manifold style, 1994 and later.
421-HK-9, Saginaw fitting style, 1994 and earlier.

For parts list, and to buy replacement parts click here

Standard Single Ram Power Steering for Alpha Applications 10.5" Standard Mount

The IMCO Standard Single Ram Power Steering System is intended for Alpha powered recreational performance sport boats. The system consists of through-transom hydraulic port bracketry with all necessary hose, fittings, fasteners, aluminum drive end caps and stainless braided line Once installed, boat drivers will experience significantly more precise steering control, especially at higher speeds.

Do it yourself. Install a single ram steering system in approximately four hours or less.

Note: These kits contain non-assembled rubber hoses and brass fittings. See steering component section for stainless steel braided line options.

Requires Installation Kit:

421-HK-11, Brazilian manifold style, 1994 and later.
421-HK-9, Saginaw fitting style, 1994 and earlier.

For parts list, and to buy replacement parts click here

• Two 22" Inside Hoses
• Two 4NPTx-6 JIC 90 Degree Fittings

Dual External Hydraulic Steering For 2 Mercury 300 X Drives

IMCO's external hydraulic steering for the Mercury 300X has been designed, engineered and tested to eliminate side-to-side drive unit "play", a major contributor to high speed chine walking IMCO's power steering system is ultra heavy-duty throughout. The  IMCO steering systems are easily installed and priced more affordably than other less efficient alternatives.

Note: These kits contain non-assembled rubber hoses and brass fittings See steering component section for stainless steel braided line options.

For parts list, and to buy replacement parts click here

Standard Single Ram Power Steering for Mercury 300R

The IMCO Standard Single Ram Power Steering System is intended for Mercury 300 R powered recreational performance sport boats. Once installed, boat drivers will experience significantly more precise steering control, especially at higher speeds.

Do it yourself. Install a single ram steering system in approximately four hours or less.

Note: These kits contain non-assembled rubber hoses and brass fittings. See steering component section for stainless steel braided line options.

Standard Single Ram Power Steering for Mercury 300 X

The IMCO Standard Single Ram Power Steering System is intended for Mercury 300 X powered recreational performance sport boats. Once installed, boat drivers will experience significantly more precise steering control, especially at higher speeds.

Do it yourself. Install a single ram steering system in approximately four hours or less.

Note: These kits contain non-assembled rubber hoses and brass fittings. See steering component section for stainless steel braided line options.

For parts list, and to buy replacement parts click here

Standard Dual Ram Power Steering for Dual Mercury 2.5 EFI

The IMCO Standard Dual Ram Power Steering System is intended for Dual Mercury 2.5 EFI powered recreational performance sport boats. Once installed, boat drivers will experience significantly more precise steering control, especially at higher speeds.

Do it yourself. Install a single ram steering system in approximately four hours or less.

Note: These kits contain non-assembled rubber hoses and brass fittings. See steering component section for stainless steel braided line options.

For parts list, and to buy replacement parts click here

Standard Dual Ram Power Steering for Mercury 300R, No Tie Bar, Outside Only

The IMCO Standard Single Ram Power Steering System is intended for Mercury 300 R powered recreational performance sport boats and used primarily in moderate water conditions. Once installed, boat drivers will experience significantly more precise steering control, especially at higher speeds.

Do it yourself. Install a single ram steering system in approximately four hours or less.

Note: These kits contain non-assembled rubber hoses and brass fittings. See steering component section for stainless steel braided line options.

Standard Single Ram Power Steering for Mercury 2.5 EFI

The IMCO Standard Single Ram Power Steering System is intended for Mercury 2.5 EFI powered recreational performance sport boats. Once installed, boat drivers will experience significantly more precise steering control, especially at higher speeds. Kit includes Tilt pin, Steering Ram, Wing Plate Outside hoses and thru hulls.

Do it yourself. Install a single ram steering system in approximately four hours or less.

For parts list, and to buy replacement parts click here

Standard Single Ram Power Steering

The IMCO Standard Single Ram Power Steering System is intended for Bravo powered recreational performance sport boats capable of speeds in the 60 to 70 mph range and used primarily in moderate water conditions. The system consists of through-transom hydraulic port bracketry with all necessary hose, fittings, fasteners, aluminum drive end caps and stainless braided line Once installed, boat drivers will experience significantly more precise steering control, especially at higher speeds.

Do it yourself. Install a single ram steering system in approximately four hours or less.

Note: These kits contain non-assembled rubber hoses and brass fittings. See steering component section for stainless steel braided line options.

Requires Installation Kit:

421-HK-11, Brazilian manifold style, 1994 and later.
421-HK-9, Saginaw fitting style, 1994 and earlier.

For parts list, and to buy replacement parts click here

Hose Kit Brazil Control Valve, Short Hoses

BRAZIL CONTROL VALVE APPLIES TO ALL EFI ENGINE PACKAGES 1994 AND LATER "FOR BOATS EXCEEDING 70 MPH A FULL HYDRAULIC HOSE KIT IS RECOMMENDED"

For parts list, and to buy replacement parts click here

Hose Kit Saginaw Control Valve, Short Hoses

"FOR BOATS EXCEEDING 70 MPH A FULL HYDRAULIC HOSE KIT IS RECOMMENDED" SAGINAW CONTROL VALVE APPLIES TO ALL HIGH PERFORMANCE ENGINE PACKAGES 1999 AND EARLIER AND TO ALL ENGINE PACKAGES 1994 AND EARLIER

For parts list, and to buy replacement parts click here

Standard Single Ram Power Steering

The IMCO Standard Single Ram Power Steering System is intended for Evinrude E-Tec 250 HO Motor powered recreational performance sport boats. Once installed, boat drivers will experience significantly more precise steering control, especially at higher speeds.

Do it yourself. Install a single ram steering system in approximately four hours or less.

Note: These kits contain non-assembled rubber hoses and brass fittings. See steering component section for stainless steel braided line options.

For parts list, and to buy replacement parts click here

Standard Single Ram Power Steering

The IMCO Standard Single Ram Power Steering System is intended for Mercury XS powered recreational performance sport boats. Once installed, boat drivers will experience significantly more precise steering control, especially at higher speeds.

Do it yourself. Install a single ram steering system in approximately four hours or less.

For parts list, and to buy replacement parts click here

Single Cylinder Zeiger Fitting Kits

Includes:

• Fitting -6 JIC Male/Female 90 Degree SS
• Fitting -6 JIC X 1/4" NPT 90 Degree
• Tee -6 JIC To -6 JIC Male SS

Dual External Hydraulic Steering For 2 Bravo One Stern Drives

IMCO's external hydraulic steering for the MerCruiser Bravo One has been designed, engineered and tested to eliminate side-to-side drive unit "play", a major contributor to high speed chine walking IMCO's power steering system is ultra heavy-duty throughout. The  IMCO steering systems are easily installed and priced more affordably than other less efficient alternatives.

Note: These kits contain non-assembled rubber hoses and brass fittings See steering component section for stainless steel braided line options.

Kit includes Tie bar up to 18" at no extra cost. Tie Bars longer than 18" will have additional price per inch. Please type the exact length of the tie bar you need (example: 34.5") and then select the price option from the drop drown (from previous example, choose 35" for a 34.5" tie bar) 

Requires Installation Kit:

421-HK-11, Brazilian manifold style, 1994 and later.
421-HK-9, Saginaw fitting style, 1994 and earlier.

For parts list, and to buy replacement parts click here

Dual External Hydraulic Steering For Bravo One Stern Drives

IMCO's external hydraulic steering for the MerCruiser Bravo One has been designed, engineered and tested to eliminate side-to-side drive unit "play", a major contributor to high speed chine walking IMCO's power steering system is ultra heavy-duty throughout. The  IMCO steering systems are easily installed and priced more affordably than other less efficient alternatives. Includes an extension box kit.

Note: These kits contain non-assembled rubber hoses and brass fittings See steering component section for stainless steel braided line options.

For parts list, and to buy replacement parts click here

Standard Single Ram Power Steering

The IMCO Standard Single Ram Power Steering System is intended for Bravo powered recreational performance sport boats capable of speeds in the 60 to 70 mph range and used primarily in moderate water conditions. Once installed, boat drivers will experience significantly more precise steering control, especially at higher speeds.

Do it yourself. Install a single ram steering system in approximately four hours or less.

Note: These kits contain non-assembled rubber hoses and brass fittings. See steering component section for stainless steel braided line options.

Requires Installation Kit:

421-HK-11, Brazilian manifold style, 1994 and later.
421-HK-9, Saginaw fitting style, 1994 and earlier.

For parts list, and to buy replacement parts click here

Standard Single Ram Power Steering

The IMCO Standard Single Ram Power Steering System is intended for Bravo powered recreational performance sport boats capable of speeds in the 60 to 70 mph range and used primarily in moderate water conditions. Once installed, boat drivers will experience significantly more precise steering control, especially at higher speeds.

Do it yourself. Install a single ram steering system in approximately four hours or less.

Note: These kits contain non-assembled rubber hoses and brass fittings. See steering component section for stainless steel braided line options.

Requires Installation Kit:

421-HK-11, Brazilian manifold style, 1994 and later.
421-HK-9, Saginaw fitting style, 1994 and earlier.

For parts list, and to buy replacement parts click here