ARP Fasteners

SB Chevy CM 12pt accessory kit

Chrome Moly Black Oxide 12-point Head Fastener Kit Chevrolet 350-400 cid, small block (1986-Earlier)

1987 & newer EFI engines or those with aftermarket components may require additional fasteners be purchased.

SB Chevy CM hex accessory kit

Chrome Moly Black Oxide Hex Head Fastener Kit Chevrolet 350-400 cid, small block (1986-Earlier)

1987 & newer EFI engines or those with aftermarket components may require additional fasteners be purchased.

SB Chevy fuel pump push rod kit

Fuel Pump Pushrod, SB Chevy, 1/2" x 5.750" Made from premium grade aerospace chrome moly and centerless ground to precise diameter. A hollow core serves to reduce weight, which requires less energy to operate. Note: not for use on steel billet cams.

SB Chevy harmonic balancer bolt kit

• 7/16"-20 Thread
• 2.470" UHL
• 13/16" Socket

To ensure the damper is locked into place, use these ultra-strong 200,000 psi bolts that exert maximum clamping force. Special features include 1/4" thick washers with an extra wide surface and tall 12-point heads that accept a deep socket to end the worry of stripping the head.

SB Chevy harmonic balancer bolt kit

• 7/16"-20 Thread
• 2.470" UHL
• 1-1/16" Socket

To ensure the damper is locked into place, use these ultra-strong 200,000 psi bolts that exert maximum clamping force. Special features include 1/4" thick washers with an extra wide surface and tall 12-point heads that accept a deep socket to end the worry of stripping the head.

HP Series Cylinder Head Hex Bolts - Small Block Chevy

High Performance head bolts are available with a reduced wrenching hex or 12-point and wide area flanged head that eliminates the need for valve train removal to facilitate cylinder head re-torquing. All High Performance Series bolts are 170,000 PSI (which is 15% stronger than Grade 8) and kits come complete with hardened parallel-ground washers.

SB Chevy hex intake manifold bolt kit

Available in either black oxide chrome moly or 300-series stainless steel, and your choice of hex or 12-point head. Each ARP intake manifold bolt kit is a must have for cinching your intake manifold in place. Features include a generously flanged 3/8'' bolt head for even loading, and a precision-ground, hardened washer to prevent galling and promote accurate torque readings. 170,000 PSI.

SB Chevy hex oil pan bolt kit

Available in black oxide finish chrome moly steel or stainless steel. Hex nuts or 12-point design.  Oil Pan bolts come with washers.

SB Chevy hex oil pan stud kit

Designed to make it easy installing a pan an seal it properly.
ARP studs are designed with a radiused bullet nose that serves to locate the pan rails. This allows the nuts to be installed easily without the worry of cross-threading. Available in black oxide chrome moly steel or stainless steel. Studs come with flanged lock nut.

Hi-Performance Head Bolt Kit, SBC Gen III/LS Series (2003 & Earlier) Hex Head

HIGH PERFORMANCE SERIES
High Performance head bolts are available with a reduced wrenching hex and wide area flanged head that eliminates the need for valve train removal to facilitate cylinder head re-torquing. All High Performance Series bolts are 170,000 psi (which is 15% stronger than Grade 8) and kits come complete with hardened parallel-ground washers.

SB Chevy LS1 hi-perf Cracked Rod

These are undeniably the strongest, most reliable OEM-replacement rod bolts available! Forged from 8740 chrome moly, you are guaranteed maximum durability, especially when combined with 's innovative manufacturing technology. Choose from new Wave-Loc or standard knurled design. 190,000 psi.

Head Studs w/12-Point Nuts, SB Chevy LS1, LS6 5.7L/6.0L, 2004 Engines

Exact Tolerances for Perfect Alignment
Exact tolerances ensure that gaskets and cylinder heads just glide into position and align perfectly. Head Studs include hex nuts and are manufactured by from premium 8740 chrome moly steel and heat treated to 190,000 psi. They are thread rolled after the heat treating process, which vastly improves their fatigue tolerance compared to studs threaded before heat treatment. High-quality, parallel ground washers included.

SB Chevy LS1 pro-series hex head stud kit

Head Studs with Hex Nuts, SB Chevy LS1, LS6 5.7L/6.0L

Exact tolerances ensure that gaskets and cylinder heads just glide into position and align perfectly. ARP Head Studs include hex nuts and are manufactured by ARP from premium 8740 chrome moly steel and heat treated to 190,000 psi. They are thread rolled after the heat treating process, which vastly improves their fatigue tolerance compared to studs threaded before heat treatment. High-quality, parallel ground washers included.

Head Studs w/12-Point Nuts, SB ChevyLS1, LS6 5.7L/6.0L

Exact Tolerances for Perfect Alignment
Exact tolerances ensure that gaskets and cylinder heads just glide into position and align perfectly. Head Studs include hex nuts and are manufactured by from premium 8740 chrome moly steel and heat treated to 190,000 psi. They are thread rolled after the heat treating process, which vastly improves their fatigue tolerance compared to studs threaded before heat treatment. High-quality, parallel ground washers included.

Hi-Performance Head Bolt Kit, SBC Gen III/LS Series (2004 & Earlier) w/All Same Length Bolts

HIGH PERFORMANCE SERIES
High Performance head bolts are available with a reduced wrenching hex and wide area flanged head that eliminates the need for valve train removal to facilitate cylinder head re-torquing. All High Performance Series bolts are 170,000 psi (which is 15% stronger than Grade 8) and kits come complete with hardened parallel-ground washers.

Hi-Performance Head Bolt Kit

Small Block Chevy Head Bolts, Cast Iron OEM, LT-AFR, Brodix-8,-10,-11,-11xb Heads (Black Oxide Inner Rows, Stainless Steel Outer Row) Hex Head

HIGH PERFORMANCE SERIES
High Performance head bolts are available with a reduced wrenching hex and wide area flanged head that eliminates the need for valve train removal to facilitate cylinder head re-torquing. All High Performance Series bolts are 170,000 psi (which is 15% stronger than Grade 8) and kits come complete with hardened parallel-ground washers.

SB Chevy square drive balancer bolt kit

This is a special version of 's rugged 200,000 psi damper bolt that can accept a standard 1/2'' drive ratchet or breaker bar to facilitate rotating the crank assembly. Made by from heat-treated 8740 chrome moly with heavy-duty black oxide finish.

SB Chevy SS 12pt accessory kit

Stainless Steel 12-Point Head Fastener Kit Chevrolet 350-400 cid, small block (1986-Earlier)

1987 & newer EFI engines or those with aftermarket components may require additional fasteners be purchased.

Small Block Chevy 12-point Intake Bolt Kit

Prevent intake manifold leaks with ARP's quality fasteners. They're rated at 170,000 psi and precision machined for optimum thread engagement. Wide underhead flange and companion washers provide even load distribution. Precision rolled threads prevent galling while promoting more consistent torque loading. Facilitates optimum sealing of gasket surfaces. Washers included.

SB Chevy SS hex accessory kit

Stainless Steel Hex Head Fastener Kit Chevrolet 350-400 cid, small block (1986-Earlier)

1987 & newer EFI engines or those with aftermarket components may require additional fasteners be purchased.