Hardin Marine

1-1/4" Pressure Relief Valve Fitting For Inline Use, 1/2" NPT

This valve should be used in conjunction with the 128-5000 pop off valve.

• Constructed of 316L Stainless Steel.
• 1-1/4" Push on Hose.
• 6" Length
• Scoops water through a 1-1/4" O.D stainless tube that can be adjusted vertically
• Pick-up may be mounted wherever you want it
• Features an O-Ring Seal.

• 316L premium stainless steel construction.
• Cone shaped screen basket provides even greater straining area.
• Basket is removable for easy cleaning.
• O-Ring sealed Lexan lid (not cheap plastic)
• Lid is removed by simple one hand grip knob. No wingnuts!
• Lid will withstand 100 PSI pressure spikes.
• Dual 1-1/4" NPT inlets and outlets.
• 3/4" NPT pressure relief port.
• 360 degree swivel mounting bracket for maximum mounting flexibility.
• Due to differences in mounting surfaces, hardware for mounting strainer not included.
• 1/2" NPT Stainless Steel fluid cooling coil at the bottom of the strainer.
• See Additional Info for extended product details.
• Find Replacement Parts Here

This hose is designed to go from your bilge pump to your water dump It is flexible and easy to route.

Water bilge hose is sold by the foot, i.e add quantity of 6 for 6 ft. of hose.

Hose comes in maximum of 50 feet sections. Please specify if you want sections cut into specific lengths when ordering over 50 feet.

This hose is designed to go from your bilge pump to your water dump It is flexible and easy to route.

• 2.5:1 RATIO FROM FULLY EXTENDED TO COLLAPSED
• AVAILABLE IN CONTINOUS PIECES UP TO 75FT
• RETAINS USER'S DESIRED SHAPE
• SPACE SAVER AND FLEXIBILITY
• LIGHTWEIGHT AND CRUSH PROOF
• PUNCTURE RESISTANT ABRASION RESISTANT AND MINIMUM FLEX STRESS
• PROPRIETARY POLYOLEFIN COPOLYMER FORMULATION BLENDING PROCESS THAT ENSURES PRODUCT CONSISTENCY
• CUSTOM COLORS AVAILABLE SOON - CURRENTLY ONLY BLACK AVAILABLE
• TEMP RANGE -40 TO 160 F
• MADE IN USA

Water bilge hose is sold by the foot, i.e add quantity of 6 for 6 ft. of hose.

12 Volt 3-Wire Trim Pump Motor

Fits:
• Merc: 17649T, 17649A1, 87828, 891736T
• API: PTS01NM-2
• Mallory: 9-18207
• Sierra: 18-6772

We carry a selection of new trim pumps for your outdrives, trim tabs and hatch rams. Floor mount trim pump for the stock stern drive package and high performance mount for the offshore racer. We also stock new replacement reservoir tanks and electric trim motors for replacement. These are what the factory uses, just not the factory price.

12" Billet Aluminum Euro Style Handle - Each

We've got them - the latest in billet handles. These Euro Styled Handles feature smooth contoured shapes and edges. These units use the same mounting holes as the traditional handles and vents so they are perfect for a new boat building project or they will retro-fit the traditional handles and vents manufactured by Hardin Marine.

*Note- These grab handles are 13-1/2" long with 12" bolt centers.  Internal threads are 5/16-18"

See what each of our powder-coated finishes (both flat and glossy) look like under different lighting here!

• Made from high strength 535 Aluminum Magnesium alloy.
• All 316 Stainless Steel hardware.
• 1-1/2" Piston bore.
• End of the tab dimension is 9" wide
• Two way hydraulics for improved performance.
• Zinc Anodes to prevent corrosion.
• Includes trim pumps with bulkhead brackets.
• Include Trim Hoses.
• Includes Trim Switch Panel.
• For 20-25 ft. Boat Lengths
• Includes installation hardware for a 33c cable, for mechanical trim indicator systems.
• NOTE: Shown in White, however Tabs are available in Black or White

• Made from high strength 535 Aluminum Magnesium alloy.
• All 316 Stainless Steel hardware.
• Includes Electronic Sensors for the Mayfair LED Trim Indicator Systems
• 1-1/2" Piston bore.
• End of the tab dimension is 9" wide
• Two way hydraulics for improved performance.
• Zinc Anodes to prevent corrosion.
• Includes trim pumps with bulkhead brackets.
• Include Trim Hoses.
• Includes Trim Switch Panel.
• For 20-25 ft. Boat Lengths
• NOTE: Shown in White, however Tabs are Standard Black. White available by special order.
• NOTE: In order to complete this system to your Garmin, or other Smartcraft / NMEA2000 compatible screen you must purchase the 137-8659 adapter box.
• NOTE: If not using a Smartcraft / NMEA2000 type screen display above, you must purchase a corresponding Mayfair Indicator System to display the position readout from your trim tabs.

• Made from high strength 535 Aluminum Magnesium alloy.
• All 316 Stainless Steel hardware.
• 1-1/2" Piston bore.
• End of the tab dimension is 9" wide
• Two way hydraulics for improved performance.
• Zinc Anodes to prevent corrosion.
• For 20-25 ft. Boat Lengths
• Includes installation hardware for a 33c cable, for mechanical trim indicator systems.
• NOTE: Shown in White, however Tabs are Standard Black. White available by special order.

• Made from high strength 535 Aluminum Magnesium alloy.
• All 316 Stainless Steel hardware.
• Includes Electronic Sensors for the Mayfair LED Trim Indicator Systems
• 1-1/2" Piston bore.
• End of the tab dimension is 9" wide
• Two way hydraulics for improved performance.
• Zinc Anodes to prevent corrosion.
• For 20-25 ft. Boat Lengths
• NOTE: Shown in White, however Tabs are Standard Black. White available by special order.
• NOTE: In order to complete this system to your Garmin, or other Smartcraft / NMEA2000 compatible screen you must purchase the 137-8659 adapter box.
• NOTE: If not using a Smartcraft / NMEA2000 type screen display above, you must purchase a corresponding Mayfair Indicator System to display the position readout from your trim tabs.

120 Degree Brass Hi-flow Marine Thermostat

These hi-flow brass marine thermostats feature air relief ports. This enables relief of the steam pockets caused by cold water entering a heated engine block. Their hi-flow design helps to maintain a constant operating temperature. Don't trust your engine to anything less!

These Hi-Flow brass marine thermostats feature air relief parts. This enables steam pockets caused by cold water entering a heated engine block. Their hi-flow design help to maintain the most constant temperature. Don’t trust your engine to anything less.

Oil Cooler Cover - 13 Plate Cast Aluminum Oil Cooler Cover, Starboard Side For KE or Mercury Flywheel Housing

These oil cooler covers are required for use when a plate style oil cooler is used with a Mercury Racing flywheel housing. Each cover is hard anodized for corrosion resistance.

All of our bravo box style coolers an d remote style boxed coolers use a replacement gasket part #625-8018

13 Plate Cast Oil Cooler Cover, Port Side for KE or Mercury Flywheel Housing

These oil cooler covers are required for use when a plate style oil cooler is used with a Mercury Racing flywheel housing.  We offer multiple styles in both cast 356-T6 aluminum or 6061-T6 billet aluminum.  Each cover is hard anodized for corrosion resistance.

All of our bravo box style coolers an d remote style boxed coolers use a replacement gasket part #625-8017

13 Plate Stainless Steel Oil Cooler With Cast Aluminum Mercury Style Cover Kit (Port)

Once again these kits are designed for your ordering convenience. Each kit consists of a single oil cooler, cover plate (choice of stainless or billet aluminum), billet jam nuts, bolts and gaskets.

All of our bravo box style coolers an d remote style boxed coolers use a replacement gasket part #625-8017

13 Plate Stainless Steel Oil Cooler With Cast Aluminum Mercury Style Cover Kit (Starboard)

Once again these kits are designed for your ordering convenience. Each kit consists of a single oil cooler, Cast aluminum oil cooler cover plate, billet jam nuts, bolts and gasket.

All of our bravo box style coolers an d remote style boxed coolers use a replacement gasket part #625-8018

13 Plate Stainless Steel Xtreme Duty Multi-Plate Oil Cooler

Our parallel multi-plate stainless steel oil coolers are the very best cooler available on the market today. Plate style coolers are unmatched in heat transfer providing maximum temperature reduction consistently while offering little to no pressure drop associated in other designs. The stainless construction offers superb corrosion resistance.

1-3/8" Clamp-On Valve Cover Breather - No Shield (Each)

These breathers feature maximum flow and protection from airborne elements. They are used on most Hardin Marine valve cover systems. The breather is washable providing for easy maintenance.

1-3/8" Dual Baffle Weld-In Breather Extension

Made from Aluminum.

Length: 3.00"

Hardin’s breathers feature maximum flow and protection from airborne elements. They are used on most Hardin Marine valve cover systems. These breathers are easily washable for service.

140 Degree Brass Hi-flow Marine Thermostat

These hi-flow brass marine thermostats feature air relief ports. This enables relief of the steam pockets caused by cold water entering a heated engine block. Their hi-flow design helps to maintain a constant operating temperature. Don't trust your engine to anything less!

15 Plate Billet Oil Cooler Cover, Port Side For KE or Mercury Flywheel Housing

These oil cooler covers are required for use when a plate style oil cooler is used with a Hardin Marine or Mercury Racing flywheel housing. We offer multiple styles in both cast 356-T6 aluminum or 6061-T6 billet aluminum. Each cover is hard anodized for corrosion resistance.

All of our bravo box style coolers an d remote style boxed coolers use a replacement gasket part #625-8017

Oil Cooler Cover - 15 Plate Cast Aluminum Oil Cooler Cover, Starboard Side For KE or Mercury Flywheel Housing

These oil cooler covers are required for use when a plate style oil cooler is used with a Mercury Racing flywheel housing. Each cover is hard anodized for corrosion resistance.

All of our bravo box style coolers an d remote style boxed coolers use a replacement gasket part #625-8018

15 Plate Stainless Steel Oil Cooler with Billet Aluminum Mercury Style Cover (Port)

These oil coolers, covers, and kits are required for use when a plate style oil cooler is used with a Hardin Marine or Mercury Racing flywheel housing. We offer multiple styles in both cast 356-T6 aluminum or 6061-T6 billet aluminum. Each cover is hard anodized for corrosion resistance.

Once again these kits are designed for your ordering convenience. Each kit consists of a single oil cooler over plate, choice of stainless steel oil cooler, billet jam nuts, bolts and gaskets.

All of our bravo box style coolers an d remote style boxed coolers use a replacement gasket part #625-8017

15 Plate Stainless Steel Oil Cooler with Cast Aluminum Mercury Style Cover (Starboard)

These oil coolers, covers, and kits are required for use when a plate style oil cooler is used with a Hardin Marine or Mercury Racing flywheel housing. We offer multiple styles in both cast 356-T6 aluminum or 6061-T6 billet aluminum. Each cover is hard anodized for corrosion resistance.

Once again these kits are designed for your ordering convenience. Each kit consists of a single oil cooler over plate, choice of stainless steel oil cooler, billet jam nuts, bolts and gaskets.

All of our bravo box style coolers an d remote style boxed coolers use a replacement gasket part #625-8018